PROE模座专家Emx

1、Expert Moldbase Extension 3.0PTCPTC为模具制造业开拓新道路为模具制造业开拓新道路.模具专家模具专家 EMX背景背景虽然虽然3D_CAD3D_CAD系统已被模具行业广泛用来设计模仁，但模架系统已被模具行业广泛用来设计模仁，但模架的设计仍然使用传统的的设计仍然使用传统的2D2D形式，形式，EMXEMX可以带领我们进入完可以带领我们进入完全的全的3D3D模具领域模具领域.Expert Moldbase Extension 3.0EMX 特点特点 I 快速选型及修改下列内容快速选型及修改下列内容模架及配件。模架及配件。选取顶针规格，自动切出相应的孔位及沉孔。选取顶针规

2、格，自动切出相应的孔位及沉孔。screws, spring washers and dowel系统预设系统预设BOM及零件图。及零件图。按预先定义的曲线轻易设计运水孔，安装水喉水堵。按预先定义的曲线轻易设计运水孔，安装水喉水堵。Expert Moldbase Extension 3.0完整的完整的开模机构开模机构，包含螺丝，销钉及自动切槽，包含螺丝，销钉及自动切槽模拟开模过程模拟开模过程完整的完整的滑块结构滑块结构，包含螺丝，销钉及自动切槽。，包含螺丝，销钉及自动切槽。 平面图中的平面图中的孔表孔表功能。功能。完整的完整的斜顶结构斜顶结构，包含螺丝，销钉及自动切槽，包含螺丝，销钉及自动切槽EM

3、X 特点特点 IIExpert Moldbase Extension 3.0EMX 特点特点 III 自动化配置：自动化配置：预设所有标准件的名称预设所有标准件的名称螺栓，销钉自动安装。螺栓，销钉自动安装。预设各类零件的参数及参数值预设各类零件的参数及参数值各类简化表达各类简化表达各类零件自动产生并归于相应图层各类零件自动产生并归于相应图层预设所有的螺栓，销钉及顶针的孔位间隙。预设所有的螺栓，销钉及顶针的孔位间隙。Expert Moldbase Extension 3.0Included SuppliersImperial (inch)D-M-EProgressivePCSNationalHA

4、SCOMetric (mm)HASCOMeusburgerSTRACKKLAEOCD-M-EFutabaMisumiExpert Moldbase Extension 3.0典型的设计步骤典型的设计步骤调入有关配件调入有关配件选取模架类型及工件排位。选取模架类型及工件排位。新开一个模具图新开一个模具图加顶针，运水加顶针，运水完善平面图完善平面图模拟开模过程模拟开模过程定义滑块，斜顶定义滑块，斜顶调入库零件调入库零件Expert Moldbase Extension 3.0新开一个模具新开一个模具Type in projectname und -prefix. Load a predefined

5、 start-assembly with BOM-report and drawing.Expert Moldbase Extension 3.0选取模架类型及工件排位选取模架类型及工件排位Create, delete and redefine components. Store and load complete assemblies. Manipulate bore patterns.Expert Moldbase Extension 3.0调入螺栓调入螺栓Placement on reference points, configure the counter-bores, let the

6、 system measure the length automaticallyExpert Moldbase Extension 3.0调入销钉，支承柱调入销钉，支承柱Choose the Type, select the bore options for both ends, redefine them after being assembled. Expert Moldbase Extension 3.0加顶针加顶针Choose the type, select options (rotate fixing, cut, length core pin), and assemble aut

7、omaticExpert Moldbase Extension 3.0加运水加运水Quick design of element and bore in one stepExpert Moldbase Extension 3.0定义滑块定义滑块Step by step definition of slider elements, check of sider unit in Pro/ENGINEER, Assembling of all cuts, dowel pins and screwsExpert Moldbase Extension 3.0定义斜顶，锁扣定义斜顶，锁扣Selection

8、 of latch lock type, control of opening steps, automated assembly included screws and pinsExpert Moldbase Extension 3.0调入库零件调入库零件UDF-styled definition of library-parts and assemblies, easy assembly of the components with BOM-parameters.Expert Moldbase Extension 3.0BOM 及平面图及平面图Regenerate the BOM-entries in assembly mode. Easy creation of simplified reps used in the drawingsExpert Moldbase Extension 3.0Free definition of bore types and table formats, geometry-based feature recognition. Works even with imported geometry!孔表孔表Expert Moldbase Extension 3.0模拟开