建筑类安全管理要求vpo

1、VPO.SAFE.3.1.10.4. Requirements for new FLT(purchased or leased, as of January 2012)Version 6VPO.SAFE.3.1.10.4. Requirements for new FLTMinimum Safety requirements for new FLT:Each FLT must comply with the local legal requirements. This must be checked with ZBS ESDocumentation Loading diagram on eac

2、h FLT (in local distance and weight units) Operating and maintenance manual, including basic pre-shift checkMirrors Rear-view mirrors.Reversing Alarms Audible reversing alarm, not possible to switch off by driver Flash light reversing alarm, not possible to switch off by driverNOTE: In zones where r

3、everse driving is a embedded practice, reversing alarms can be optional. This must be approved by ZBS ESSpeed Control Speed control, max speed is 10 mph / 16 km/h or other if indicated by ZBS ES team. Alternative: audible loud alarm if FLT is speedingVPO.SAFE.3.1.10.4. Requirements for new FLTMinimu

4、m Safety requirements for new FLT:Lighting At a minimum 2 LED lights forward facing, powered on when key is one, not possible to switch off by driver. More lights depending on capacity of FLT, to be aligned with ZBS ES (picture 1). 1 LED light rear, powered on when driving in reverse, not possible t

5、o switch off by driver. Blue spot light (installed on the cabin) (picture 2). Flashing Blue LED light back, mounted upwards at 15 degrees (picture 3) (can be left out if aligned with ZBS Safety) 2 Flashing Blue LED lights on each side of the cabin, mounted upwards at 15 degrees (can be left out if a

6、ligned with ZBS Safety)Cameras Front and back cameras (not mended): case by case review, need to be aligned with the ZBS ES team Chair (seat) Dead man (seat) switch (“driver in position” switch) must safely stop the FLT when engaged and should sound an alarm if driver is leaving seat without engagin

7、g hand break Chair with adjustable suspension. Chair with adjustable back rest Turnable chair (swivel option)VPO.SAFE.3.1.10.4. Requirements for new FLTMinimum Safety requirements for new FLT:Seat belts. Auto-shutoff or acoustic alarm if seatbelt not in use 3 points safety beltHigh visibility seat b

8、elt (see picture 4)Cabin Raised cabin, case by case review, need to be aligned with the ZBS ES team Proper handles to allow safe 3 point-contact access to the seat (picture 5) Rear Drive handle with horn button mounted on each rear post of the cabin (picture 6) Safe anti-slip steps to allow safe 3 p

9、oint-contact access to the seat (picture 7) An overhead guard. A front window - windshield (safety glass) with windscreen wiper (can be left out if aligned with ZBS Safety) A closed cabin (depending on use and climate), case by case review, need to be aligned with the ZBS ES team Cabin heating and c

10、ooling, case by case review, need to be aligned with the ZBS ES team 2 stickers “3-points of contact” (picture 8) Fluorescent reflective striping, preferable painted example picture 10 Clipboard light VPO.SAFE.3.1.10.4. Requirements for new FLTMinimum Safety requirements for new FLT:Back rest on mas

11、t Backrests must be high enough to prevent the load from falling back towards the lift (see picture 9)Tires Non-marking tiresPower For indoor use, FLT must be powered by electricity or LPG Pedal scheme (foot control, 2 or 3 pedals), must be aligned with ZBS ES team For use with LPG (gas): proper pro

12、tection of the gas tank (balloon) + over pressure valve WMS and other displays and keyboards on FLT:The operation of keyboards (example for WMS on FLT) is forbidden during driving. For new installed WMS on FLT and for new FLT the use of the keyboards must be blocked unless the FLT is standing still.

13、(WMS = Warehouse Management System) VPO.SAFE.3.1.10.4. Requirements for new FLTCollision Detection and Pedestrian Alarm SystemsNew technology is being developed to enhance workplace transport safety. 2 Systems that should be considered when purchasing new FLT are:Collision detection device that give

14、s an alarm (to a central control system or an audible alarm) or immobilizes the forklift truck when involved in a collision.Pedestrian Alert System: Pedestrians wear electronic tags that are detected by a device on the forklift truck, warning the driver of the presence of a pedestrian.Picture 1 : LE

15、D lightsPicture 2 : Blue spotPicture 3 : flashing LED lightsPicture 4 : HIVI safety beltPicture 5: handles Picture 6: Rear Drive handle with horn button Only for elevated cabinsOnly for elevated cabinsPicture 7 : Safe stepsPicture 8 : 3 points of contactPicture 9 : Backrest must be of sufficient hei

16、ghtPicture 10: example of bodywork paintingDocument HistoryVersionAuthorDateDescription of Version1Peter Copermans31-01-2012First version2Peter Copermans02-04-2012Extra picture blue flashing lights (picture 3)3Peter Copermans25-10-2012Upgrade after meeting Non-supply (changes in blue italic) 4Peter Cope