酷派readmeFlashOne工具与其适配的QFIL适用于系统无法启动

1、FlashOne tool and related QFIL packages are used only for flashing a complete phhichcant boot up, board level and phone with changed components flashing operationis strictly prohibited, or it may cause unpredictable conditions.安装说明将压缩包解压到不含中文，不含空格，不含特殊字符的目录，双击 main.exe 运行刷机工具1.2 adb, fastboot 命令已经预置

2、，不需要安装，但需要安装 360助手等以保证可以自动安装驱动如果用到 qfil 刷机，请先安装 qfil 驱动，驱动放在 driver 目录下，安装时请先断开网络，安装完毕后请重启电脑刷机过程中不要断开连接线多次刷机的时候会提示“解压缩文件夹已经存在，是否需要重新解压缩？”， 选否不用再次解压缩，直接升级刷 userdata 选项，用户选“是”会丢数据，选“否”不丢数据，但是可能升级不彻底，建议刷机前备份数据升级包会解压到刷机工具包中，因为刷机包比较大，请保证磁盘空间足够1.8 请将的/硬件兼容性表格放到刷机工具所在文件夹下主要功能介绍系统更新当电脑连网情况下，刷机工具启动时会检测服务器上是否

3、有弹出更新提示框版本，如果有新版本会兼容性表格2.2在菜单中有GetHSCT 菜单项，点击此菜单，会直接的兼容性表格，同时会将本地的 hsct 表格备份到 HSCTBackup 文件夹下，备份文件的后缀为当时的时间点。如果因为网络问题或者其他原因文件拷贝回来。失败，会弹出失败的提示框，同时会把原来的如果的文件格式不正确，也会弹出提示框，同时把原来可用的文件拷贝回来。2.3 fastboot 刷机刷机方式默认为 fastboot，同时按住电源键和音量减使进入 fastboot 模式，然后连上数据线，等驱动安装完毕后，点击刷新设备，将显示设备序列号和设备类型，如果设备没有刷过 deviceInfo

4、 分区，将不显示设备类型，此时想要正常刷机可以选择强制刷机按钮，这样工具将不会校验硬件和版本是否匹配，需要自己判断选择对应的刷机包（zip 包），zip 包不要放在中文路径下选择是否刷 userdata点击开始刷机，如果本地有该刷机包的解压包，将提示是否需要重新解压，如果选择是，将重新解压文件，等文件解压完毕后将自动刷机，进度条将显示刷机进度，同时会显示刷机的 logFlashOne 工具与其适配的 QFIL适用于系统无法启动的整机状态下的救回，严禁用于器件更换阶段的板级刷机操作，后者可能会出现无法预知的异常！刷机完成或者出现错误时都会有提示框弹出如果刷机失败并提示“unlock fastbo

5、ot 刷机，方法：设置-关于”2.4 qfil 刷机operation is not allowed”，请先手动OEM 再进行-连续点击“版本号”打开“开发者选项”-选择“OEM刷机方式选择 qfil 后，同时按电源键，音量增减键使进入 qfil 模式，然后连上数据线，等驱动安装完毕，点击刷新设备将显示所有的 qfil 可用串，选择相应的串，注意不要连接其他高通设备，否则会影响刷机选择对应的刷机包（zip 包），zip 包不要放在中文路径下(请自己确认刷机包，qfile 模式下工具无法判断刷机包与是否匹配)点击开始刷机，如果本地有该刷机包的解压包，将提示是否需要重新解压，如果选择是，将重新解压

6、文件，等文件解压完毕后将自动刷机，进度条将显示刷机进度，同时会显示刷机的 log刷机完成或者出现错误时都会有提示框弹出2.5 mtk 刷机刷机方式选择 mtk 后，选择对应的刷机包（zip 包），zip 包不要放在中文路径下(请自己确认刷机包，mtk 模式下无法判断刷机包与是否匹配)点击开始刷机，如果本地有该刷机包的解压包，将提示是否需要重新解压，如果选择是，将重新解压文件，等文件解压完毕后将自动开始刷机，此时会弹出“请在一分钟内插入设备”的提示框，此时需要在一分钟内按音量加同时插 USB 线，然后将自动开始刷机，同时进度条显示刷机进度，log 也将显示在界面上。刷机完成或者刷机出现错误时都会

7、弹出提示框2.6 获取信息处于正常待机状态，确保USB debugging 开启并且 adb devi能获得设备。点击 Device Info 栏“ 刷新” 按钮将获取的 IMEI/M/Manufacturroduct/Platform Ver信息显示（获取不到的信息 UI 会显示空Name/Marketing Name/SW Ver白）。点击“清除”按钮将清空各项信息。点击“导出”按钮将导出各项信息到文件，并弹出提示框提示文件保存位置。2.7 显示刷机包信息Fastboot/Qfil/MTK 刷机过程中，在Software Info 栏显示刷机包的Software Variant/Produ

8、ct/Software Ver信息MInstallUnzip the zip file to the directory not include Chi space, and double click main.exe to run flash tool.or spel character and bl1.2. adb, fastbootds are preset, dont need to install, but need install phoneassistant, so make sure phone driver can be installed automatically.1.3

9、. When flash with qfil type, you need to install qfil driver, the driver is under driverfolder, please disconnect network when install the driver, and restart the pc after installcompleted.1.4. Please dont disconnect the USB cable during flashing.1.5. When flash with same flash file, tips presfolder

10、 already existed,press or not?, select no, will notpress and flash directly.1.6. If choose flash userdata, all user data will be lost, else not, but flash maybeso suggest to backup data before flashing.pley,1.7. Flash zip file willenough space.pressedo flash tool folder, so please make sure there is

11、1.8Please put the latest HW/SW compatibility fileo the folder of flash tool.Main FunctionSystem UpdateIf the network is connected, when flash tool start, it will check if there is new verserver, if yes, pop up update dialog.on2.2 Download HSCT FileThere is GetHSCTonbar, press this, will download HSC

12、T file directly, andbackup the local hsct file to HSCTBackup folder, the suffix of the backup file is the time when youback up the file.If the file download failed with network or other ie, there will be a download faileddialog pop up, and copy the fiack from HSCTBackup folder.If the format of the d

13、ownloaded file is not correct, there will be also a dialog pop up, andcopy the fiack from HSCTBackup folder also.2.3 Fastboot FlashThe default flash type is fastboot, when select fastboot flash type, presser key andvolume down key at the same time, then phill entero fastboot mode. Connect with USBca

14、ble, wait for install driver automatically, then press Refresh button, serial No. and device typewill show on UI, maybe some phones cant display device type,ts because these phones. But before upgrade, youdidnt flash devinfo part, these phones need to upgrade tvercan select Force Flash to flash the

15、phone,hardware is matching yourself.his situation, you should check if the software andSelect corresponding flash zip file, the path of zip file should not contain Chicharacter.Select Flash Userdata or notand spelPress Flash button, then start to unzip flash zip file to current folder, but if there

16、is already acorresponding unzip file existing, dialog will pop up, if select yes, willpresfolder already existed,press or not?press, else not. After unzip finished, start to flashthe phone automatically, and the progress bar display flashing progress, and at the same time,the flashing log will also

17、be shown on UI.After flash complete or error happened, a notification dialog will pop up.If fastboot flash failed and notify “unlock operation is not allowed”, please unlock OEM manually and then restart fastboot flash. Unlock steps: Settings-About phone-tap “Build” continuously then open “Developer

18、 options”-enable “OEM unlocking”.2.4 qfil FlashWhen select qfil flash type, presser key, volume up and volume down key at the sametime, then the phone entero qfil mode, connect USB cable with PC, wait for PC install driverautomatically, then press Refresh button on the tool, serial port will display

19、 on UI, select theport you want to flash, and make sure there is no other qcom device connected.Select corresponding flash zip file, the path of zip file should not contain Chiand spelcharacter. (Under qfil mode, the tool cant get hardware information, you should check if thesoftware and hardware is

20、 matching yourself.)Press Flash button, then start to unzip flash zip file to current folder, but if there is already acorresponding unzip file existing, will pop up, if select yes, willpresfolder is exist,press or not? dialogpress, else not. After unzip finished, start to flash thephone automatical

21、ly, and the progress bar display flashing progress, and at the same time, theflashing log will also be shown on UI.After flash complete or error happened, a notification dialog will pop up.2.5 mtk FlashWhen select mtk flash type, select corresponding flash zip file, the path of zip file should notco

22、ntain Chiand spel character. (Under mtk mode, the tool cant gerdware information,you should check if the software and hardware is matching yourself.)Press Flash button, then start to unzip flash zip file to current folder, but if there is already acorresponding unzip file existing, will pop up, if s

23、elect yes, will phone automatically.presfolder is exist,press or not? dialogpress, else not. After unzip finished, start to flash theWhen pop up Please connect with device in one minute! dialog, press volume up key and atthe same time connect with USB cable, then start to flash the phone automatically, and the progress bar display flashing progress