- 现行
- 正在执行有效
- 2013-02-14 颁布
©正版授权
注:本标准为国际组织发行的正版标准,下载后为完整内容;本图片为程序生成,仅供参考,介绍内容如有偏差,以实际下载内容为准
![【正版授权】 ISO 14720-2:2013 EN Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Indu_第1页](http://file4.renrendoc.com/view4/M02/03/3F/wKhkGGaIFEuAH7evAAGjP8czakI357.jpg)
全文预览已结束
下载本文档
基本信息:
- 标准号:ISO 14720-2:2013 EN
- 标准名称:陶瓷原料和基本材料的测试 非氧化陶瓷原料和基本材料的粉末和颗粒中硫的测定 第2部分:在氧气流中燃烧后的电感耦合等离子体光发射光谱法 (ICP/OES) 或离子色谱法
- 英文名称:Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
- 标准状态:现行
- 发布日期:2013-02-14
文档简介
1.**样本准备**:首先需要选择合适的样品进行切割、研磨和过筛,以获得粉末或颗粒样品。
2.**燃烧处理**:将粉末或颗粒样品在氧气流中进行燃烧,以将硫转化为二氧化硫或三氧化硫。这一步是为了将硫转化为可以测定的形式。
3.**溶液制备**:将燃烧后的残渣通过化学溶解或酸浸处理,以获得含有硫元素的溶液。
4.**ICP/OES分析**:使用ICP/OES设备对溶液中的硫元素进行定量分析,以确定样品中硫的含量。这种方法具有高灵敏度和高分辨率,适用于大规模的样品分析。
5.**质量控制**:在整个分析过程中,需要进行一系列的质量控制步骤,如空白实验、标准曲线绘制等,以确保分析结果的准确性和可靠性。
以上是使用ICP/OES或燃烧后在氧气流中通过离子色谱法对陶瓷原材料和基本材料中的硫进行测定的详细步骤。这种方法适用于各种非氧化物陶瓷原材料和基本材料,如玻璃、矿物、水泥等。同时,该方法也需要注意一些细节,如样品的选取、处理、试剂的选择等,以确保分析结果的准确性。
温馨提示
最新文档
- 【正版授权】 ISO 21111-4:2020 EN Road vehicles - In-vehicle Ethernet - Part 4: General requirements and test methods of optical gigabit Ethernet components
- 【正版授权】 ISO 2110:1972 EN Title missing - Legacy paper document
- 【正版授权】 ISO 21079-3:2008 EN Chemical analysis of refractories containing alumina,zirconia,and silica - Refractories containing 5 percent to 45 percent of ZrO2 alternative to the
- 【正版授权】 ISO 20957-1:2013 EN Stationary training equipment - Part 1: General safety requirements and test methods
- 【正版授权】 ISO 2084:1974 EN Pipeline flanges for general use - Metric series - Mating dimensions
- 【正版授权】 ISO 2082:2008 EN Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
- 【正版授权】 ISO 20567-2:2017 EN Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
- 【正版授权】 ISO 20515:2007 EN Rolling bearings - Radial bearings,retaining slots - Dimensions and tolerances
- 【正版授权】 ISO 20474-5:2008 EN Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
- 【正版授权】 ISO 2023:1994 EN Rubber footwear - Lined industrial vulcanized-rubber boots - Specification
- 小学二年级语文上册阅读理解专项训练20篇
- DFMEA模板(精品文档)
- 1药历20份教学14lyy妇女儿童医疗中心
- DBJ∕T13-354-2021 既有房屋结构安全隐患排查技术标准
- 调机品管理规定
- 最新医院规章制度汇编(医技管理1)
- 2022诗词大会知识题库(含答案版)
- 工器具使用管理制度(3篇)
- 石化工程建设项目设计管理概要课件
- 维修电工高级技师论文(6篇推荐范文)
- 淘宝物流红章证明模板
评论
0/150
提交评论