曲轴的加工工艺及夹具设计外文翻译参考word

1、毕业设计外文翻译题 目 曲轴的加工工艺及夹具设计 学 院 航海学院 专 业 轮机工程 学 生 佟宝诚 学 号 10960123 指导教师 彭中波 重庆交通大学 2014年推荐精选Proceedings of IMECE20082008 ASME International Mechanical Engineering Congress and ExpositionOctober 31-November 6, 2008, Boston, Massachusetts, USAIMECE2008-67447MULTI-OBJECTIVE SYSTEM OPTIMIZATION OF ENGINE C

2、RANKSHAFTS USINGAN INTEGRATION APPROACHAlbert Albers/IPEK Institute of Product DevelopmentUniversity of Karlsruhe GermanyNoel Leon/CIDyT Center for Innovation andDesignMonterrey Institute of Technology,MexicoHumberto Aguayo/CIDyT Center forInnovation and Design, Monterrey Institute ofTechnology, Mex

3、icoThomas Maier/IPEK Institute of Product Development University of Karlsruhe GermanyABSTRACTThe ever increasing computer capabilities allow faster analysis in the field of Computer Aided Design and Engineering (CAD & CAE). CAD and CAE systems are currently used in Parametric and Structural Opti

4、mization to find optimal topologies and shapes of given parts under certain conditions. This paper describes a general strategy to optimize the balance of a crankshaft, using CAD and CAE software integrated with Genetic Algorithms (GAs) via programming in Java. An introduction to the groundings of t

5、his strategy is made among different tools used for its implementation. The analyzed crankshaft is modeled in commercial parametric 3D CAD software. CAD is used for evaluating the fitness function (the balance) and to make geometric modifications. CAE is used for evaluating dynamic restrictions (the

6、 eigenfrequencies). A Java interface is programmed to link the CAD model to the CAE software and to the genetic algorithms. In推荐精选 order to make geometry modifications to our case study, it was decided to substitute the profile of the counterweights with splines from its original “arc-shaped” design

7、. The variation of the splined profile via control points results in an imbalanceresponse. The imbalance of the crankshaft was defined as an independent objective function during a first approach, followed by a Pareto optimization of the imbalance from both correction planes, plus the curvature of t

8、he profile of the counterweights as restrictions for material flow during forging. The natural frequency was considered as an additional objective function during a second approach. The optimization process runs fully automated and the CAD program is on hold waiting for new set of parameters to rece

9、ive and process, saving computing time, which is otherwise lost during the repeated startup of the cad application.The development of engine crankshafts is subject to a continuous evolution due to market pressures. Fast market developments push the increase of power, fuel economy, durability and rel

10、iability of combustion engines, and calls for reduction of size, weight, vibration and noise, cost, etc. Optimized engine components are therefore required if competitive designs must be attained. Due to this conditions, crankshafts, which are one of the most analyzed engine components, are required

11、 to be improved 1. One of these improvements relies on material composition, as companies that develop combustion engines have expressed their intentions to change actual nodular steel crankshafts from their engines, to forged steel crankshafts. Another important direction of improvement is the opti

12、mization of its geometrical characteristics. In particular for this paper is the imbalance, first Eigen-frequency and the forge-ability. Analytical tools can greatly enhance the understanding of the physical phenomena associated with the mentioned characteristics and can be automated to do programme

13、d tasks that an engineer requires for optimizing a design 2.The goals of the present research are: to construct a strategy for the development of engine crankshafts based on the integration of: CAD and CAE (Computer Aided Design &Engineering) software to model and evaluate functional推荐精选paramete

14、rs, Genetic Algorithms as the optimization method, the use of splines for shape construction and Java language programming for integration of the systems. Structural optimization under these conditions allows computers to work in an automated environment and the designer to speed up and improve the

15、traditional design process. The specific requirements to be satisfied by the strategies are:Approach the target of imbalance of a V6 engine crankshaft, without affecting either its weight or itsmanufacturability.Develop interface programming that allows integration of the different software: CAD for

16、 modeling and geometric evaluations, CAE for simulation analysis and evaluation ,Genetic Algorithms for optimization and search for alternatives .Obtain new design concepts for the shape of the counterweights that help the designer to develop a better crankshaft in terms of functionality more rapidl

17、y than with the use of a “manual” approachShape optimization with genetic algorithmsGenetic Algorithms (GAs) are adaptive heuristic search algorithms (stochastic search techniques) based on the ideas of evolutionary natural selection and genetics 3. Shape optimization based on genetic algorithm (GA)

18、, or based on evolutionary algorithms (EA) in general, is a relatively new area of research. The foundations of GAs can be found in a few articles published before 1990 4. After 1995 a large number of articles about investigation and applications have been published, including a great amount of GA-b

19、ased geometrical boundary shape optimization cases. The interest towards research in evolutionary shape optimization techniques has just started to grow, including one of the most promising areas for EA-based shape optimization applications: mechanical engineering. There are applications for shape d

20、etermination during design of machine components and for optimization of functional performance of these the components, e.g. antennas 5, turbine blades 6, etc. In the ield of mechanical engineering, methods for structural and topological optimization based on evolutionary algorithms are used to obt

21、ain optimal geometric solutions that were commonly approached only by costly and time consuming iterative process. Some examples are the computer design and optimization of cam shapes for diesel engines 7. In this case the objective of the cam design was to minimize the vibrations of the system and

22、to make smooth changes to a splined profile.推荐精选In this article the shape optimization of a crankshaft is discussed, with focus on the geometrical development of the counterweights. The GAs are integrated with CAD and CAE systems that are currently used in Parametric and Structural Optimization to f

23、ind optimal topologies and shapes of givenparts under certain conditions. Advanced CAD and CAE software have their own optimization capabilities, but are often limited to some local search algorithms, so it is decided to use genetic algorithms, such as those integrated in DAKOTA (Design Analysis Kit

24、 for Optimization Applications) 8 developed at Sandia Laboratories. DAKOTA is an optimization framework with the original goal ofproviding a common set of optimization algorithms for engineers who need to solve structural and design problems, including Genetic Algorithms. In order to make such integ

25、ration, it is necessary to develop an interface to link the GAs to the CAD models and to the CAE analysis. This paper presents an approach to this task an also some approaches that can be used to build up a strategy on crankshaft design anddevelopment.Multi-objective considerations of crankshaft per

26、formanceThe crankshaft can be considered an element from where different objective functions can be derived to form an optimization problem. They represent functionalities and restrictions that are analyzed with software tools during the design process. These objective function are to be optimized (

27、minimized or maximized) by variation of the geometry. The selected goal of the crankshaft design is to reach the imbalance target and reducing its weight and/or increasing its first eigenfrequency. The design of the crankshaft is inherently a multiobjective optimization (MO) problem. The imbalance i

28、s measured in both sides of the crankshaft so the problem is to optimize the components of a vector-valued objective function consisting of both imbalances 9. Unlike the single-objective optimization, the solution to this problem is not a single point, but a family of points known as the Pareto-opti

29、mal set. Each point in this set is optimal in the sense that no improvement can be achieved in one objective component that does not lead to degradation in at least one of the remaining components 10.推荐精选The objective functions of imbalance are also highly nonlinear. Auxiliary information, like the

30、derivatives of the objective function, is not available. The fitness-function is available only in the form of a computer model of the crankshaft, not in analytical form. Since in general our approach requires taking the objective function as a black box, and only the availability of the objective f

31、unction value can be guaranteed, no further assumptions were considered. The Pareto-based optimization method, known as the Multiple Objective Genetic Algorithm (MOGA) 11, is used in the present MO problem, to finding the Pareto front among these two fitness functions.In GAs, the natural parameter s

32、et of the optimization problem is coded as a finite-length string. Traditionally, GAs use binary numbers to represent such strings: a string has a finite length and each bit of a string can be either 0 or 1. By maintaining a population of solutions, GAs can search for many Pareto-optimal solutions i

33、n parallel. This characteristic makes GAs very attractive for solving MO problems. The following two features are desired to solve MO problems successfully:1) the solutions obtained are Pareto-optimal and2) they are uniformly sampled from the Pareto-optimal set.推荐精选NOMENCLATURECAD: Computer Aided De

34、sign; GAs: Genetic Algorithms; EA: Evolutionary Algorithms; MO: Multi-objective; MOGA: Multi-objective Genetic Algorithm; CW: Counterweight; FEM: Finite Element Method.OPTIMIZATION OF BALANCE WITH GEOMETRICALFig. 1: Imbalance graph from the original crankshaft DesignCrankshaft shape parameterization

35、 In order to make geometry modifications it is decided to substitute the current shape design of the crankshaft under analysis, from the original “arc-shaped” design representation of the counterweights profile, to a profile using spline curvesThe figure 2 shows a counterweight profile of the cranks

36、haft.推荐精选Fig. 2: Profile of a counterweight represented by a splineOptimization StrategiesThe general procedure of the strategy is described below. During the optimization loop the CAD software is automatically controlled by an optimization algorithm, i.e. by a Genetic Algorithms (GA). The y coordin

37、ates of the control points that define the splined profile of the crankshaft can be parametrically manipulated thanks to an interface programmed in JAVA. The splined profiles allow shapes to be changed by genetic algorithms because the codified control points of the splines play the role of genes. T

38、he Java interface allows the CAD software to run continually with the crankshaft model loaded in the computer memory, so that every time an individual is generated the geometry automatically adapts to the new set of parameters.推荐精选Fig. 3: Profile Shapes of CW1, CW2, CW8 and CW9 from an individual in

39、 the Pareto FrontierA corresponding constraint to the optimization strategy is formulated next. An additional objective function was added: the measure of the curvature of all the splines from the profiles of counterweights. As it is known, the curvature is the inverse of the radius of an inscribed

40、circle of the curve. In this case it was decided to integrate into the geometry the required inscribed circles and analysis features to extract the maximum curvature along the profiles of the four varying推荐精选Fig. 4: Curvature in CW9 profile showing an improvedCurvatureIn the second part of this pape

41、r an additional evaluation is going to be introduced: the dynamic response of the crankshaft in order to control the first eigen frequency, with the aim of not affecting the weight. As in this first approach, the GA is going to be used to produce automatically alternative crankshaft shapes for the F

42、EM simulator program, to run the simulator, and finally to evaluate the counterweights shapes on the basis of the FEM output data.SUMMARY AND CONCLUSIONSThe use of the Java interface allowed the integration of the genetic algorithm to the CAD software, in the first part of the paper, an optimization

43、 of the imbalance of a crankshaft was performed. It was possible the development of a Pareto frontier to find the closest-to-target individual. But the shapes of the counterweights were not so suitable for forging, for that reason it was necessary to introduce an additional objective function to imp

44、rove the curvature of the counterweights profile. A further integration with the CAE software, as described in the second part, was performed. It was possible to improve some shapes of the crankshaft but with not so good imbalance results. The development of a new graph with the additional first eig

45、en-frequency objective was plotted, from which important conclusions were extracted: It is necessary to prevent the sharp edges of the counterweights shape by adding extra restrictions as推荐精选 curvature of shapes.Simulation of the forging process is required in order to define a relationship between

46、good shapes-curvature and manufacturability. This becomes significantly important when a proposed design outside the initial shape restrictions needs to be justified in order not to affect forge ability.This paper defined the basis and the beginning of a strategy for developing crankshafts that will

47、 include the manufacturability and functionality to compile a whole Multiobjective System Optimization.ACKNOWLEDGMENTSThe authors acknowledge the support received from Tecnológico de Monterrey through Grant No. CAT043 to carry out the research reported in this paper.REFERENCES 1 Z.P. Mourelatos

48、, “A crankshaft system model for structural dynamic analysis of internal combustion engines,” Computers & Structures, vol. 79, 2001, pp.2009-2027. 2 P. Bentley, Evolutionary Design by Computers, USA:Morgan Kaufmann, 1999. 3 D.E. Goldberg, Genetic Algorithms in Search ,Optimization and Machine Le

49、arning, USA: Addison-Wesley Longman Publishing Co., 1989. 4 C.A. Coello Coello, “A Comprehensive Survey of Evolutionary-Based Multi-objective Optimization Techniques,” Knowledge and Information Systems, vol.1, 1999, pp. 129-156. 5 B.E. Cohanim, J.N. Hewitt, and O. de Weck, “TheDesign of Radio Telesc

50、ope Array Configurations using Multiobjective Optimization: Imaging Performance versus Cable Length,” astro-ph/0405183, 2004, pp. 1-42; 6 M. Olhofer, Yaochu Jin, and B. Sendh off, “Adaptiveen coding for aerodynamic shape optimization using evolution strategies,” Evolutionary Computation, Seoul: 2001

51、, pp. 576-583. 7 J. Lampinen, “Cam shape optimization by genetical gorithm,” Computer-Aided Design推荐精选, vol. 35, 2003, pp.727-737. 8 M. Eldred et al., DAKOTA, A Multilevel ParallelObject-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, andSensitivity Anal

52、ysis. Reference Manual, USA: Sandia Laboratories, 2002. 9 Y. Kang et al., “An accuracy improvement for balancing crankshafts,” Mechanism and Machine Theory, vol. 38,2003, pp. 1449-1467. 10 S. Obayashi, T. Tsukahara, and T. Nakamura,“Multiobjective genetic algorithm applied toaerodynamic design of ca

53、scade airfoils,” Industrial Electronics, IEEE Transactions on, vol. 47, 2000, pp.211-216. 11 C.M. Fonseca and P.J. Fleming, “An Overview of Evolutionary Algorithms in Multiobjective Optimization,” Evolutionary Computation, vol. 3, 1995,pp. 1-16 12 - ., “Comparison of Strategies forthe Optimization/I

54、nnovation of Crankshaft Balance,”Trends in Computer Aided Innovation, USA: Springer,2007, pp. 201-210. 13 S. Rao, Mechanical vibrations, USA: Addison-Wesley, 1990. 14 C.A. Coello Coello, An empirical study of evolutionary techniques for multi-objective optimization in engineering design, USA: Tulane

55、 University, 1996. 15 N. Leon-Rovira et al., “Automatic Shape Variations in 3d CAD Environments,” 1st IFIP-TC5 Working Conference on Computer Aided Innovation, Germany:2005, pp. 200-210. 16 R.E. Smith, B.A. Dike, and S.A. Stegmann, “Fitness inheritance in genetic algorithms,” ACM symposium on Applie

56、d computing, USA: ACM, 1995, pp. 345-350.推荐精选IMECE2008学报2008年ASME国际机械工程国会和博览会2008年10月31-11月6日，波斯顿，马赛诸塞州，美国IMECE2008-67447适用于多目标系统优化发动机曲轴（阿尔伯特·阿尔伯斯/ IPEK产品开发研究所，德国卡尔斯鲁厄大学；诺埃尔利昂/ CIDyT创新中心和设计，墨西哥蒙特雷理工学院；温贝托Aguayo / CIDyT创新中心和设计，墨西哥蒙特雷理工学院；托马斯迈尔/ IPEK产品开发研究所，德国卡尔斯鲁厄大学）摘推荐精选 要随着计算机的功能不断增加，计算机辅助设计与工

57、程(CAD和CAE)也不断加强。目前CAD和CAE系统也用于设计，在一定条件下能够选取最优参数和结构并且找到最佳的形状。本文描述了一个总体战略,优化曲轴的平衡, 通过用Java编程结合CAD和CAE软件计算出最优的参数。要使用不同的工具设计不同的工艺。分析曲轴使用商业建模参数的三维CAD软件。CAD适用于适应度函数(平衡)和几何修改。CAE适用于动态限制(学)。Java接口程序链接到CAE软件的CAD模型进行计算。我们的案例研究的是几何修改,这是从原来的“弧形”设计用样条函数替代砝码的形象决定的。花键不平衡要文件的响应通过控制点的变化来控制。首先是曲轴的平衡被定义为一个独立的目标函数,其次是失

58、衡的帕累托优化两点校正,并且限制物体的曲率的关键在于锻造。自然频率被认为是另一个影响参数的方面。CAD的重复启动应用程序等应用是通过CAD程序完全自动化过程的优化和暂停等待接收等处理来设计出新设置的参数。前推荐精选 言发动机曲轴由于受到持续的发展演变市场的压力。燃油经济性、耐用性和内燃机的可靠性,呼吁减少大小、重量、振动和噪音，成本等力量推动着市场快速发展。因此竞争必须从优化引擎组件这个刚面着手。由于这种原因。曲轴这一大多数分析引擎组件必须得到改善1。这些改进依赖于材料组成之一,随着公司的发展,内燃机锻钢曲轴实际表达了他们的意图改变结节性钢从发动机曲轴。另一个重要改进是其几何特征的优化方向。尤其是在锻造上要求符合其固有频率。分析工具可以大大提高对物理现象的理解与提到的相关特性, 工程师需要优化设计编程任务可以自动完成2。目前研究的目标是:建立一个战略发展的发动机曲轴的集成工艺