精选同济大学苏小卒版土木工程专业英语翻译考试整理秘籍

1、同济大学苏小卒版土木工程专业英语翻译考试整理秘籍第一单元Fundamentally, engineering is an end-product-oriented discipline that is innovative, cost-conscious and mindful of human factors. It is concerned with the creation of new entities, devices or methods of solution: a new process, a new material, an improved power source, a

2、more efficient arrangement of tasks to accomplish a desired goal or a new structure. Engineering is also more often than not concerned with obtaining economical solutions. And, finally, human safety is always a key consideration.从根本上，工程是一个以最终产品为导向的行业，它具有创新、本钱意识，同时也注意到人为因素。 它与创立新的实体、 设备或解决方案有关：新工艺、新材

3、料、一个改良的动力来源、任务的一项更有效地安排，用以完成所需的目标或创立一个新的结构。 工程是也不仅仅关心获得经济的解决方案。最终，人类平安才是一个最重要的考虑因素。Engineering is concerned with the use of abstract scientific ways of thinking and of defining real world problems. The use of idealizations and development of procedures for establishing bounds within which behavior c

4、an be ascertained are part of the process.工程关心的是，使用抽象的科学方法思考和定义现实世界的问题。理想化的使用和开展建立可以确定行为的边界的程序，是过程的一局部。Many problems, by their very nature, cant be fully describedeven after the fact, much less at the outset. Yet acceptable engineering solutions to these problems must be found which satisfy the defi

5、ned needs. Engineering, then, frequently concerns the determination of possible solutions within a context of limited data. Intuition or judgment is a key factor in establishing possible alternative strategies, processes, or solutions. And this, too, is all a part of engineering.很多的问题，就其本身的性质而言，不能完全

6、被描述 即使这一事实，在其开始之前。然而还必须找到对于这些问题可接受的工程解决方案，来满足预定的需求。直觉或判断是建立可能的替代策略、 流程或解决方案的关键因素。而这也是工程的一局部。Civil engineering is one of the most diverse branches of engineering. The civil engineer plans, designs, constructs, and maintains a large variety of structures and facilities for public, commercial and indus

7、trial use. These structures include residential, office, and factory buildings; highways, railways, airports, tunnels, bridges, harbors, channels, and pipelines. They also include many other facilities that are a part of the transportation systems of most countries, as well as sewage and waste dispo

8、sal systems that add to our convenience and safeguard our health.土木工程是工程的最多样化的分支机构之一。土木工程师方案、设计、施工，和维护大量的结构和公共、商业和工业使用的设施。这些结构包括住宅，办公室和工厂大厦；公路、铁路、机场、隧道、桥梁、港口、渠道和管道。在其他大多数的国家它们还包括运输系统许多其他设施，以及将为我们的生活带来便利的和维护我们的健康污水及废物处理系统。The term “civil engineer did not come into use until about 1750, when John Smea

9、ton, the builder of famous Eddystone lighthouse near Plymouth, England, is said to have begun calling himself a “civil engineer to distinguish himself from the military engineers of his time. However, the profession is as old as civilization.直到大约1750年，人们才开始使用“土木工程师这一术语。约翰.斯密顿在英格兰普利茅斯附近，建造了著名的埃迪斯通灯塔的

10、建造师，开始自称为“土木工程师来将自己与当时的军事工程师区分开。然而，土木工程这个职业却像文明一样古老。 In ancient Egypt the simplest mechanical principles and devices were used to construct many temples and pyramids that are still standing, including the great pyramid at Giza and the temple of Amon-Ra at Karnak. The great pyramid, 481 feet(146.6 me

11、ters)high, is made of 2.25 million stone blocks having an average weight of more than 1.5tons (1.4 metric tons). Great numbers of men were used in the construction of such monuments. The Egyptians also made obelisks by cutting huge blocks of stone, some weighing as much as 1000 tons (900 metric tons

12、). Cutting tools of hard bronze were used.古埃及人用最简单的机械原理和装置建造了许多至今仍矗立的庙宇和金字塔，包括吉萨大金字塔和在卡纳克的Amon-Ra的寺庙。这个大金字塔，481英尺146.6 米高，由2250000个石块组成，石块的平均重量超过1.5吨1.4 吨。建造如此的纪念性建筑使用了大量的人力。埃及人也作了一些重达1000吨(900吨)的石头的大块切割的方尖塔。硬青铜的切削刀具在其中使用到了。The Egyptians built causeways and roads for transporting stone from the quar

13、ries to the Nile. The large blocks of stone that were erected by the Egyptians were moved by using levers, inclined planes, rollers, and sledges.为了从采石场向尼罗河运输石材埃及人建造了长堤和道路。由埃及人竖设的大块石头通过使用拉杆、斜平面、滚子和雪橇来移动。The Egyptians were primarily interested in the know-how of construction; They had very little inte

14、rest in why-for of use .In contrast, the Greeks made great strides in introducing theory into engineering problems during the 6th to 3rd centuries B.C. They developed an abstract knowledge of lines, angles, surfaces, and solids rather than referring to specific objects. The geometric base for Greek

15、building construction included figures such as the square, rectangle, and triangle.埃及人主要对如何建造感兴趣；他们对为什么这么使用没有什么太多的兴趣。相反，在公元前六世纪到公元前三世纪希腊人取得了巨大的进步于工程理论的推广。他们开展了线、角度、面，和实体的抽象的知识，而不是与特定的对象产生联系。 希腊建筑施工的几何根底包括数字如正方形、矩形和三角形。The Greek architekton was usually the designer, as well as the builder, of archite

16、ctural and engineering masterpieces. He was an architect and engineer. Craftsmen, masons, and sculptors worked under his supervision. In the classical period of Greece all important buildings were built of limestone or marble; the Parthenon, for example, was built of marble.希腊建筑师 通常是建筑工程杰作的设计师同时也是建造

17、师。 他既是一个建筑师也是工程师。工匠、石匠和雕塑家在他的监督下工作。在希腊古典时期所有重要建筑物是由石灰石或大理石建造的；以帕台农神庙为例，由大理石建成的。UNIT 3The principal construction materials of earlier times were wood and masonry-brick, stone, or tile, and similar materials. The courses or layers砖层were bound together with mortar or bitumen, a tarlike substance, or so

18、me other binding agent. The Greeks and Romans sometimes used iron rods or clamps to strengthen their building. The columns of the Parthenon in Athens雅典的帕台农神庙, for example, have holes drilled钻孔 in them for iron bars that have now rusted away锈蚀殆尽. The Romans also used a natural cement called pozzolana

19、, made from volcanic ash, that became as hard as stone under water. 早期主要的建筑材料是木材和砌体，如砖、石、瓦以及类似的材料。砖层之间通过砂浆、沥青一种焦油状的物质或其他一些粘合剂粘合在一起。希腊人和罗马人有时用铁条或夹子来加固他们的房屋。例如，雅典的帕台农神庙柱子中曾钻孔以便参加铁条，如今都已锈蚀殆尽。罗马人也用称作白榴火山灰的天然水泥，它用火山灰制作，在水中会变得与石头一样坚硬。 Both steel and cement, the two most important construction materials of

20、 modern times, were introduced推广 in the nineteenth century. Steel, basically an alloy of iron 铁合金and a small amount of carbon, had been made up to that time到那个时候 by a laborious繁复的 process that restricted it to such special uses as sword blades刀刃. After the invention of the Bessemer process 贝塞麦炼钢法in

21、1856, steel was available in large quantities at low prices. The enormous advantage of steel is its tensile strength; that is, it does not lose its strength when it is under a calculated degree (适当的) of tension, a force which, as we have seen, tends to 往往pull apart many materials. New alloys have fu

22、rther increased the strength of steel and eliminated some of its problems, such as fatigue, which is a tendency for it to weaken as a result of continual changes in stress连续的应力变化. 作为现代两种最重要的建筑材料，钢材与水泥在十九世纪得到了推广。直到那个时候，钢材才通过繁复的过程制造出来，根本上是铁合金，并含有少量的碳，因而被限制在一些特殊的用途如刀刃。在1856年创造了贝塞麦炼钢法后，钢材才得以大量低价获得。钢材巨大的

23、优势即是它的抗拉强度，也就是当它在适当的拉力下不会失去强度，正如我们所看到的，该力往往能够将很多材料拉开。新的合金进一步提高了钢材的强度，并消除了一些缺点，如疲劳，即在连续的应力变化下导致强度减弱的趋势。Modern cement, called Portland cement, was invented in 1824. It is a mixture of limestone石灰石 and clay, which is heated and then ground into a powder磨成粉末. It is mixed at or near the construction site

24、 施工现场with sand, aggregate (small stones, crushed rock, or gravel), and water to make concrete. Different proportions of the ingredients 配料produce concrete with different strength and weight. Concrete is very versatile; it can be poured, pumped, or even sprayed into 喷射成all kinds of shapes. And wherea

25、s steel has great tensile strength, concrete has great strength under compression. Thus, the two substances complement each other互补. 现代水泥创造于1824年，称为波特兰水泥。它是石灰石和粘土的混合物，加热后磨成粉末。在或靠近施工现场，将水泥与砂、骨料小石头、压碎的岩石或砾石、水混合而制成混凝土。不同比例的配料会制造出不同强度和重量的混凝土。混凝土的用途很多，可以浇筑、泵送甚至喷射成各种形状。混凝土具有很大的抗压强度，而钢材具有很大的抗拉强度。这样，两种材料可以互

26、补。 They also complement each other in another way: they have almost the same rate of contraction and expansion. They therefore can work together in situations where在情况下 both compression and tension are factors主要因素. Steel rods钢筋 are embedded in埋入concrete to make reinforced concrete in concrete beams

27、or structures where tension will develop出现. Concrete and steel also form such a strong bond - the force that unites粘合 them - that the steel cannot slip滑移 with the concrete. Still还有 another advantage is that steel does not rust in concrete. Acid酸 corrodes steel, whereas concrete has an alkaline chemi

28、cal reaction, the opposite of acid. 它们也以另外一种方式互补：它们几乎有相同的收缩率和膨胀率。因此，它们在拉、压为主要因素时能共同工作。在出现拉力的混凝土梁或结构中，将钢筋埋入混凝土而成钢筋混凝土。混凝土与钢筋形成如此强大的结合力这个力将它们粘合在一起以致于钢筋在混凝土中不会滑移。还有另一个优势是钢筋在混凝土中不会锈蚀。酸能腐蚀钢筋，而混凝土会发生碱性的化学反响，与酸相反。 The adoption of structural steel and reinforced concrete caused major changes in traditional

29、construction practices施工作业. It was no longer necessary to use thick walls of stone or brick for multistory buildings, and it became much simpler to build fire-resistant floors防火地面. Both these changes served to有利于 reduce the cost of construction. It also became possible to erect建造buildings with great

30、er heights and longer spans. 结构钢与钢筋混凝土的采用使传统的施工作业发生了明显的变化。对多层建筑，再也没必要采用厚的石墙或砖墙，且施工防火地面变为容易得多。这些变化有利于降低建筑的本钱。它也使建造高度更高和跨度更大的建筑物成为可能。 Since the weight of modern structures is carried承受 by the steel or concrete frame, the walls do not support the building. They have become curtain walls, which keep out

31、 the weather and let in light. In the earlier steel or concrete frame building, the curtain walls were generally made of masonry; they had the solid look of bearing walls承重墙. Today, however, curtain walls are often made of lightweight materials such as glass, aluminum, or plastic, in various combina

32、tions. 由于现代结构的重量由钢或混凝土框架承受，墙体不再支承建筑物。它们成为幕墙，将日晒风吹雨打阻挡在外，而让光线进入。在较早的钢或混凝土框架建筑中，幕墙一般由砌体构成；它们具有承重墙的结实外观。但是今天，幕墙通常由轻质材料组成，如玻璃、铝或塑料，并形成不同的组合。 Another advance in steel construction结构 is the method of fastening together连在一起 the beams. For many years the standard method was riveting. A rivet is a bolt with

33、a head that looks like a blunt screw圆头螺丝钉 without threads螺纹. It is heated, placed in holes through the pieces of steel钢构件, and a second head is formed at the other end by hammering锤击it to hold it in place固定就位. Riveting has now largely been replaced by welding, the joining together of pieces of steel

34、 by melting熔化 a steel material between them under high heat. 钢结构中的另一个进步是梁的连接方式。在很多年里，连接的标准方式是铆接。铆钉是个有头的螺栓，看上去象个没有螺纹的圆头螺丝钉。铆钉加热后穿过钢构件之间的孔洞，并通过锤击另一端而形成第二个铆钉头，从而将其固定就位。如今铆接已大量地被焊接所替代，钢构件间的连接通过在高热下熔化它们之间的钢材料即焊条进行。 Prestressed concrete is an improved form of reinforcement加强方法. Steel rods are bent into th

35、e shapes to give them the necessary degree of tensile strength. They are then used to prestress 对.预加应力concrete, usually by one of two different methods. The first is to leave channels in a concrete beam that correspond to相应于 the shapes of the steel rods. When the rods are run through the channels, t

36、hey are then bonded to the concrete by filling the channels with grout, a thin mortar or binding agent. In the other (and more common) method, the prestressed steel rods are placed in the lower part of a form模板 that corresponds to the shape of the finished structure成品结构, and the concrete is poured a

37、round them. Prestressed concrete uses less steel and less concrete. Because it is so economical, it is a highly desirable非常理想 material. 预应力混凝土是加强法的改良形式。将钢筋弯成一定的形状以使它们具有必要的抗拉强度，然后用该钢筋对混凝土施加预应力，通常可采用两种不同方法中的任何一种。第一种方法是在混凝土梁中按钢筋的形状留下孔道，当钢筋穿过孔道后，通过在孔道内灌注薄砂浆一种稀薄的砂浆或粘合剂将钢筋与混凝土粘结在一起。另一种更常用的方法是将预应力钢筋置于按成品结构

38、的形状设置的模板的较低部位，然后将混凝土倒入模板而包围着钢筋。预应力混凝土使用了较少的钢筋和混凝土，由于它是如此的经济，因此是一种非常理想的材料。 Prestressed concrete has made it possible to develop建造 buildings with unusual shapes, like some of the modern sports arenas, with large space unbroken by any obstructing supports阻碍的支撑物. The uses for this relatively new structu

39、ral method are constantly being developed不断地扩大. 预应力混凝土使建造独特形状的建筑物成为可能，象一些现代的运动场，它具有不受任何支撑物阻挡视线的大空间。这种较新的结构方法的使用正在不断地被扩大。 The current tendency is to develop采用 lighter materials, aluminum, for example, weighs much less than steel but has many of the same properties. Aluminum beams have already been us

40、ed for bridge construction and for the framework of a few buildings. 目前的趋势是采用较轻的材料。例如，铝的重量比钢轻得多，但具有很多相同的性能。铝材梁已经用于桥梁建筑和一些建筑的框架。 Lightweight concretes, another example, are now rapidly developing开展 throughout the world. They are used for their thermal insulation(绝热性). The three types are illustrated

41、below举例说明如下: (a) Concretes made with lightweight aggregates; (b) Aerated concretes (US gas concretes) foamed起泡 by whisking搅拌or by some chemical process during casting; (c) No-fines concretes. 另一个例子是轻质混凝土，如今已在全世界快速地开展，因它们的绝热性而被采用，其三种类型举例说明如下：(a)轻质骨料制成的混凝土；(b)通过浇筑时搅拌或一些化学方法起泡而成的加气混凝土US加气混凝土；(c)无细骨料混凝土

42、。 All three types are used for their insulating properties绝热性, mainly in housing, where they give high非常 comfort in cold climates and a low cost of cooling降温本钱in hot climates. In housing, the relative weakness of lightweight concrete walls is unimportant, but it matters有重大关系 in roof slabs, floor sla

43、bs and beams. 这三种类型的混凝土都是由于它们的绝热性而被使用，主要用于房屋，使其在寒冷的气候中非常舒服，在炎热的气候中降温的本钱不高。在房屋中，墙采用较薄弱的轻质混凝土不重要，但是屋面板、楼面板和梁采用轻质混凝土那么有重大关系。 In some locations, some lightweight aggregates cost little more than几乎等于 the best dense致密 aggregates and a large number of 大量 floor slabs have therefore been built of lightweight

44、 aggregate concrete purely for its weight saving, with no thought of没考虑 its insulation value. 在某些地区，一些轻质骨料的费用几乎等于最致密的骨料，因此大量的楼面板采用轻骨料混凝土制作纯粹是节约重量，而没考虑它的绝热价值。 The lightweight aggregate reduces the floor dead load恒载 by about 20 per cent resulting in导致considerable savings in the floor楼盖结构 steel in ever

45、y floor and the roof, as well as in the column steel and (less) in the foundations. One London contractor承包商prefers to use lightweight aggregate because it gives him the same weight reduction in the floor slab as the use of hollow tiles, with simpler organization and therefore higher speed and profi

46、t. The insulation value of the lightweight aggregate is only important in the roof insulation, which is greatly improved改良. 轻质骨料使楼面的恒载减少了约20%，因而大量的节约了每层楼面以及屋面的楼盖结构中的钢材和柱子与根底中较少的钢材使用量。一位伦敦的承包商宁愿使用轻质骨料，因为这使楼面板上减少的重量与用空心砖相同，且组织更简单，因而速度和利润更高。轻质骨料的绝热价值只在屋面绝热时显得重要，它已被大大地改良了。UNIT 4 Mechanics of Materials d

47、eals with研究the response of various bodies, usually called members构件, to applied forces施加力. In Mechanics of Engineering Materials the members have shapes that either exist in actual structures or are being considered for their suitability根据其需要as parts of proposed拟建的engineering structures. The materia

48、ls in the members have properties that are characteristic of commonly used常用的engineering materials such as steel, aluminum, concrete, and wood. 材料力学用以研究不同物体通常称为构件对施加力的响应。在工程材料力学中，构件的形状可以是实际结构中存在的，也可以根据其需要而进行考虑设计，作为拟建工程结构的部件。构件中材料的性能即是常用的工程材料如钢材、铝材、混凝土和木材的特性。 As you can see already from the variety o

49、f materials, forces, and shapes mentioned, Mechanics of Engineering Materials is of interest to对.有价值all fields of engineering. The engineer uses the principles of Mechanics of Materials to determine if the material properties and the dimensions of a member are adequate to足以ensure that it can carry i

50、ts loads safely and without excessive distortion. In general通常, then, we are interested in both the safe load that a member can carry and the associated相关的deformation. Engineering design would be a simple process if the designer could take into consideration考虑the loads and the mechanical properties

51、of the materials, manipulate利用an equation, and arrive at得到suitable dimensions. Design is seldom that simple. Usually通常, on the basis of根据experience, the designer selects a trial试算 member and then does an analysis to see if that member meets the specified requirements. Frequently常常, it does not and t

52、hen a new trial member is selected and the analysis repeated. This design cycle设计周期 continues until a satisfactory solution is obtained. The number of cycles循环次数 required to find an acceptable design diminishes as the designer gains experience. 正如你已经从提到的各种各样的材料、力和形状所看到的，工程材料力学对所有的工程领域都有价值。工程师利用材料力学的

53、原理来确定是否该材料的性能和构件尺寸足以保证它能平安地承受荷载且没有过多的变形。通常，我们关心的是构件能承受的平安荷载及其相应的变形。如果设计者能通过考虑荷载和材料的力学性能，并利用公式得到适宜的构件尺寸，那么工程设计将是一个简单的过程。然而设计很少那么简单。通常，根据经验，设计者选择一个试算构件，然后进行分析，看它是否满足规定的要求。它常常不会满足要求，那么再选择一个新的试算构件，再进行分析。这样的设计不断重复，直至得到一个满意的结果。当设计师拥有一定的经验后，为得到一个可接受的设计所需要的循环次数会减少。 Design of Axially Loaded Members 轴向力构件的设计

54、To give you some insight into 使.有一些了解the design cycle, an extremely simple member will be dealt with first. That member is a prismatic bar with a force, P, acting along its longitudinal axis in the direction纵轴向such that it tends to elongate the bar. Such a force is referred to as称为an axial tensile l

55、oad轴向拉力, and we can readily imagine it trying to努力.pull the fibers apart and to cause failure on a transverse plane横向平面. It is safe to assume that all fibers of the bar, in regions remote from远离the point of application of the load, are being pulled apart with the same load intensity荷载强度. With this a

56、ssumption, the load intensity or stress is uniform on a transverse plane and is given by 为了使你对设计周期有一些了解，首先研究一个非常简单的构件。构件是个棱形的杆件，其上沿着它的纵轴向作用一个力P，这样往往使杆件在该方向上伸长。这样的力称为轴向拉力，我们能容易地想象它在努力地将纤维拉开，导致横向平面的破坏。平安地假定杆件的所有纤维在远离荷载施加点的区域以相同的荷载强度被拉开。在此假定下，荷载强度或应力在横向平面上是均匀的，为 when P is in以.为单位Newtons and A is in squ

57、are metres, stress, ,is in Newtons per square metre (N/m2), which is by definition根据定义Pascals (Pa).当P的单位为牛顿、A的单位为平方米时，应力的单位为牛顿每平方米N/m2，根据定义为帕斯卡Pa。 For a given axial load and given dimensions, the stress can be calculated from (4-1) and compared with与.相比the stress that can be safely carried by the ma

58、terial. The safe stress, known as称为the design stress or allowable stress许用应力, is determined by tests performed on material made to按照 the same specifications as the part being considered. A safety factor平安系数, frequently imposed by a legally established code法规, is applied to the strength, as determine

59、d by tests, to give the allowable stress. The allowable stress, a , is given by 对的轴向力和构件尺寸，可根据公式4-1计算出应力，并与材料能平安承受的应力作比拟。平安应力，称为设计应力或许用应力，它是通过对材料的试验来确定的，该试验材料按照与所考虑验算的杆件相同的标准制作。根据法规规定，通常对试验所确定的强度考虑平安系数后得到许用应力。许用应力 a 为where f is the stress at which the material fails (failure to be defined later) and

60、 n is the safety factor.这里，f 为材料失效失效在下文有定义时的应力，而n为平安系数。 It might at first起先seem that the designer would always dimension选定.的尺寸the cross section横截面 so that the stress would exactly equal the allowable stress. However, it may be very costly to produce parts that have nonstandard sizes, so it is usuall