纯化水系统安装确认验证方案

1、 1 / 40批准人Approver for English versionQA 经理QA manager批准人Approver for bilingual version管理者代表Management representative目的目的/ / PURPOSEPURPOSE本方案的目的是验证纯化水系统的设计、制造、安装、运行是否符合要求。1 1参考法规与文件参考法规与文件/DOCUMENT/DOCUMENT REFERENCESREFERENCES2 2职责职责/ / RESPONSIBILITIESRESPONSIBILITIES3 3定义与缩写定义与缩写/ / DEFINITIONSDE

2、FINITIONS ANDAND ABBREVIATIONABBREVIATION修订记录修订记录/ / RevisionhistoryRevisionhistory: :1.01.0 版：初始版本版：初始版本ReleaseRelease 1.01.0 Initial Release部门FunctionName签名Signature日期Date制定人Author验证代表Validation representative审核人Reviewer维修保养部门代表Maintenance representative文件编号 Reference No.文件标题 TitleURSURS 024024药业厂

3、房技术要求 URS for JV buildingVP00VP006 6纯化水系统验证 DI water system Qualification VMPVMP转移项目计划 EIA transfer PlanSBE-GP-003SBE-GP-003验证主程序 General Procedure for Validation步骤步骤/ / StepsSteps部门部门/ / DepartmentDepartment执行测试/Test Execution供应商进行安装确认IQ by supplier测试结果审核/ Test Verification验证部门代表Validation represen

4、tative验证报告撰写/ Writing the report验证部门代表Validation representative 2 / 404 4系统描述系统描述 / / SYSTEMSYSTEM DESCRIPTIONDESCRIPTION海发水处理工程提供 3m3/h 一级反渗透+EDI 药用纯化水制取装置。The supplier Highfine Co.,Ltd provides 2m3/h 1RO+EDI PW system.水源为市自来水公司提供的自来水.The running water supplied by HAIMEN RUNNING WATER COMPANY is th

5、e raw water.纯化水水质要求达到白敬宇厂房用户需求文件 URS 0024 中规定的标准。Product water should reaches the standards as defined in the URS 0024 User requirement specification for JV building.5 5 纯化水系统工艺流程纯化水系统工艺流程 purepure waterwater systemsystem processprocess缩写缩写/Short/Short formform定义定义 / / DefinitionDefinitionPW纯化水 Puri

6、fied waterRO反渗透 Reverse osmosisEDI去离子 Electro-deionization 3 / 40原水箱Raw water tank原水泵Raw water pump 多介质过滤器Sand filter活性炭过滤器Activated carbon filter5m 精密过滤器5m precise filter阻垢剂Scale inhibitor高压泵High pressure pump 反渗透系统RO systemRO 水箱RO water tankEDI 水泵EDI water pumpEDI 系统EDI systemPH 调节剂PH adjustor 4 /

7、 40纯化水制备工艺流程上采用：预处理脱盐（一级 RO）EDI后处理等步骤。Process of purified water: pre-treatdesalt(1RO) EDIpost treatment5.1 初处理包括气冲式多层石英砂过滤器（0.5-1；1-2）、活性碳过滤器（4-20 目）、蜂房式过滤器(5m)作前级处理，去除水中的胶体、有机物、悬浮物、余氯、5m 以上的微颗粒以与有效降低水中总硬度。5.2 脱盐部分采用一级反渗透的方法，这是纯水制取系统中最为关键的一步。本公司反渗透膜选用国际最为先进、回收率、脱盐率最高的卷式复合膜作为组件材料。一级反渗透去除原水中 98以上的阴阳离子

8、以与各种有害菌落和热源，以保证水的脱盐效果，从而保证产品水的最终品质。5.3 EDI 选用德国西门子公司生产的模堆，此装置通过填充在电池模堆中的树脂吸附水中的金属离子，达到脱盐的目的。EDI 系统的特点是脱盐率高，树脂无需使用酸碱再生，具有较高的产水质量，水的电导率可达到 0.5S/cm（25）以，水的利用率最高可达 95%，其最大特点是利用电能而不是酸碱化学对树脂进行再生处理。同时，EDI 系统还具有占地面积小、出水水质稳定、运行操作费用低、操作管理方便等优点。5.4 后处理选用紫外线杀菌器是为了满足用户对细菌控制的要求， 0.1m 微孔过滤器是将细菌尸体有效的过滤，从而根本上保证了出水的水

9、质。6 6 验证方案设计理由验证方案设计理由/ / QUALIFICATIONQUALIFICATION STRATEGYSTRATEGY将安装和厂商设计规格作比较。对纯化水质量有影响的因素和功能需要验证.Makea formal comparison between the installation and the manufacturer design specifications.Element and functions with a quality impact need to be qualified纯水箱Pure water tank纯水泵Pure water pump紫外线杀菌

10、器UV0.1m 精密过滤器 5 / 407 7验证测试验证测试 / / QUALIFICATIONQUALIFICATION TESTTEST测试方案编号References测试名称DescriptionIQ 006/1 Test 1 设施验证 Utilities VerificationIQ 006/1 Test 2 设备验证 Devices VerificationIQ 006/1 Test 3 文件验证 Documentation VerificationIQ 006/1 Test 4 安装验证 Installation VerificationIQ 006/1 Test 5 校验验证

11、Tag and calibration certificates VerificationIQ 006/1 Test 6 材料证明 Material VerificationIQ 006/1 Test 7 盲管死角验证 Dead angle VerificationIQ 006/1 Test 8 坡度验证 Slopes VerificationIQ 006/1 Test 9焊接验证 Welding VerificationIQ 006/1 Test 10压力验证 Pressure VerificationIQ 006/1 Test 11清洗和钝化验证 Verification of clean

12、ing, passivation8 8通过标准通过标准/ / ACCEPTANCEACCEPTANCE CRITERIACRITERIA如满足以下条件，可以通过安装验证：Installation Qualification is accepted if :-完成所有的测试All activities have been performed-没有不可接受偏差No blocking anomaly remains-撰写报告并批准The report is written and approved通过安装验证后方可进行操作验证。The acceptation of the IQ will allow

13、 the start of OQ. 6 / 40前提前提/ / PrerequisitePrerequisite完成完成 / / CheckCheck1.1.方案已经通过方案已经通过ThisThis protocolprotocol hashas beenbeen approvedapproved2.2.操作人经过执行验证的相关培训操作人经过执行验证的相关培训OperatorsOperators areare trainedtrained forfor processprocess validationvalidation executionexecution步骤步骤No.No.验证项目验证项

14、目StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference功率11KW电压380V（3 相 5 线）1 1供配电Electricity supply / consumption操作围是否合理、安装是否符合要求Check the operative range is appropriate to the co

15、rrect operation of the system and its installation is suitable for required use频率50 Hz,水温8-30 C流量6m3 /h管径DN 322 2饮用水Raw water操作围是否合理、安装是否符合要求Check the operative range is appropriate to the correct operation of the system and its installation is suitable for required use压力0.25Mpa压力6 bar,流量50 l/h管径8mm

16、3 3压缩空气Compressed air操作围是否合理、安装(过滤器，调压阀)是否符合要求Check the operative range is appropriate to the correct operation of the system and its installation(filters, valves) is suitable for required use附件过滤器、调压阀压力3 Bar管径DN254 4工业蒸汽Industrial steam操作围是否合理、安装是否符合要求Check the operative range is appropriate to the

17、 correct operation of the system and its installation is suitable for required use附件过滤器、减压阀 7 / 40步骤步骤/No./No.备注备注/ /CommentsComments测试操作人测试操作人/ /TestTest performedperformed by:by:签名签名/Signature/Signature日期日期/ /DateDate测试所用计量仪器测试所用计量仪器/ /ListList ofof equipmentequipments s usedused : :附件列表附件列表/ /Lis

18、tList ofof attachmentsattachments 8 / 40测试审核人测试审核人/ /TestTest reviewedreviewed by:by:签名签名/Signature/Signature日期日期/ /DateDate合格合格 / / ConformoConformo不合格不合格 / / NonNon conformoconformo备注备注 / / CommentsComments : :目标目标 objectiveobjective检查主要的部件，验证安装的部件和现有的技术文件是否一致；记录名称，品牌，型号和序列号等其他相关信息。Characterize th

19、e major components of the installation verifying that the equipment installed corresponds with existing technical documentation and recording the following information for each one: designation, brand, model ,serial number and/or other relevant characteristics.步骤步骤 No.No.验证项日验证项日StepStep description

20、description验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference1 1PH 调节装置 101- TV-01供应商计量泵Supplier Dosage pump:美国帕斯菲达Pulsaafeede前提前提/ / PrerequisitePrerequisite完成完成 / / CheckCheck1.1. 本方案已被批准本方案已被批准ThisThis pr

21、otocolprotocol hashas beenbeen approvedapproved2.2.操作人已接受执行验证的培训操作人已接受执行验证的培训OperatorsOperators areare trainedtrained forfor validationvalidation executionexecution 9 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresu

22、lts合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference溶解槽 Dissolved groove: 大自然Suzhou natural计量泵型号Model Dosage pumpX030序列号Serial number扬程Head7BAR流量 flow4.73L/H01-PD-01数量Quantity1套 1set供应商Supplier海发Nantong highfine型号modelUV-5数量Quantity1台1set波长 Wave length254nm2 2紫外线杀菌灯101-UV-01Flowing UV LA

23、MP材料Material：304供应商Supplier海发Nantong highfine3 3原水箱01-TV-02raw watertank数量Quantity1 只1pcs 10 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference体积volume2m

24、3材料material304360 喷水球/360 spraying ball液位控制器/Level controller空气呼吸器/Spare nozzle on top储水罐附件The storage tank is equiped with-人孔/Man hole供应商Supplier丹麦格兰富Grundfos型号ModelCR5-9序列号Serial numberA96517043P10849扬程 Range47.7m流量大小 flow5.8T/h4 4原水泵01-PC-01raw water pump数量 Quantity1 台 1 set型号modelHF-SL-8005 5多介质

25、过滤器01-FM-01Sand filter数量quantity1 台 11 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference供应商Supplier海发Nantong Highfine尺寸size800操作压力Operation pressure4bar

26、填充物 Filling material quartz sand 石英砂石英砂规格/数量：Quartz type/ amount 1-2mm300Kg0.5-1mm600Kg供应商Supplier海发Nantong Highfine型号modelHF-TL-800数量quantity1台尺寸size800操作压力Pressure 4bar填充物： Filling material 活性碳、石英砂Activated carbon, quartz sand6 6活性碳过滤器01-AC-01Activated carbon filter活性炭规格/数量：石英砂规格/数量：4-20 目 250Kg1-

27、2mm150Kg计量泵Supplier Dosage pump美国帕斯菲达Pulsaafeede7 7阻垢剂01- TV-0302- 01-PD-02Scale inhibitor供应商溶解槽Dissolvedgroove:大自然Suzhou natural 12 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号Ano

28、malyAnomaly referencereference计量泵 型号 Dosage pump ModelX030序列号Serial number扬程Head7Bar流量flow4.73L/H数量： Quantity1 套1 set供应商Supplier海发Nantong highfine型号modelHF-JMF-203数量： Quantity1台 1 set结构可自由更换滤芯滤芯材质material PP外壳材质material 304-过滤精度precision5m8 8精密过滤器01-JMF-01Precise filter-滤芯规格数量：Amount 20 英寸*3 根20ft*3

29、pcs9 9高压泵01-PC-03供应商： Supplier丹麦格兰富Grundfos 13 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference类别 Type CR5-29型号：ModelA96513392P10844扬程： 160mHead流量大小： 5

30、.0t/hflowpressure pump数量： 1 台Quantity 1 pcs供应商： Supplier氏DOW型号： modelBW30-4040数量： Quantity15根15pcs1010反渗透膜01-RO-01RO membranes工作压力： pressure15bar计量泵Supplier Dosage pump美国帕斯菲达Pulsaafeede供应商溶解槽Dissolvedgroove:大自然Suzhou natural计量泵 型号 Dosage pump ModelX030序列号Serial number1111PH 调节装置 201-TV-0501-PD-03Sca

31、le inhibitor扬程Head7Bar 14 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference流量flow4.73L/H数量： Quantity1 套1 set供应商Supplier海发Nantong highfine体积： volume1m3数量

32、： Quantity1台1 set材料： material304360 喷水球360 spraying ball液位控制器Level controller空气呼吸器Spare nozzle on top1212RO水箱02-TV-01RO water tank储水罐附件The storage tank is equiped with:人孔Man hole供应商： Supplier： 丹麦格兰富Grundfos型号ModelCHI4-401313EDI 水泵02-PC-01EDI water pump序列号Serial numberC4J518004P10832 15 / 40步骤步骤 No.N

33、o.验证项日验证项日StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference材料： Material316扬程 Head28m流量flow4.5t/h供应商supplierIONPURE型号modelIP-LXM30Z-1数量： Quantity1个1pcs工作压力pressure5bar1414EDI膜块

34、02-EDI-01EDI module序列号Serial number81704供应商： Supplier海发Nantong highfine数量： Quantity1只1pcs体积：volume6m3材料：material316L360 喷水球/360 spraying ball液位控制器/Level controller1515纯水箱02-TV-02Storage tank of purified water储水罐附件The storage tank is equiped with：空气呼吸器/Spare nozzle on top 16 / 40步骤步骤 No.No.验证项日验证项日St

35、epStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference人孔/Man hole供应商： Supplier丹麦格兰富类别： TypwCHI12-25型号ModelD4F518025P10914材料： Material316扬程： Head42m1616纯水泵02-PC-02Purified water pump流

36、量大小： flow10t/h供应商： Supplier海发Nantong highfine型号： modelUV-10数量： Quantity1台1set波长： Wave length254nm材料： Material：316L1717紫外线杀菌灯202-UV-01Flowing UV LAMP紫外线系统附件计时器供应商Supplier海发Nantong highfine18180.1m 精密过滤器02-JMF-010.1m microhole filter型号 ：Model：JMF407 17 / 40步骤步骤 No.No.验证项日验证项日StepStep descriptiondescri

37、ption验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference数量 ： Quantity：1台1set结构：可自由更换滤芯外壳材质material316L滤芯材质materialPTEF过滤精度precision 0.1m-滤芯规格数量Amount 40英寸*7根40ft*7pcs 18 / 40步骤步骤/No./No.备注备注/ /CommentsComment

38、s测试操作人测试操作人/ /TestTest performedperformed by:by:签名签名/Signature/Signature日期日期/ /DateDate测试所用计量仪器测试所用计量仪器/ /ListList ofof equipmentequipments s usedused : :附件列表附件列表/ /ListList ofof attachmentsattachments测试审核人测试审核人/ /TestTest reviewedreviewed by:by:签名签名/Signature/Signature日期日期/ /DateDate合格合格 / / Confor

39、moConformo不合格不合格 / / NonNon conformoconformo备注备注 / / CommentsComments : : 19 / 40前提前提/ / PrerequisitePrerequisite完成完成 / / CheckCheck2.2.本方案已被批准本方案已被批准ThisThis protocolprotocol hashas beenbeen approvedapproved3.3.操作人已接受执行验证的培训操作人已接受执行验证的培训OperatorsOperators areare trainedtrained forfor validationvali

40、dation executionexecution步骤步骤 No.No.验证项目与标准验证项目与标准StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证证明文件验证证明文件ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference竣工图(管道设施和安装平面图As-built drawings (P&IDs and Isometrics )编号 Ref : BJY-

41、PW-PID-3 页BJY-PE-PMT-1 页所有设备的技术规格Technical specifications of all equipments编号 Ref BJY-PW-SBGG-1 页电气，气动图表Electric & pneumatic diagrams编号 Ref : HF-R=E-03-33 页BJY-PW-QL-1 页操作和维护手册Operation and maintenance manuals编号 Ref : 建议零件清单Recommended spare parts list编号 Ref : BJY-PW-BPQD-1 页1 1竣工文件As built docu

42、mentation :核对是否具备所有文件Verify that each document is available.检查设备的安装是否符合每一份文件的要求。签字并注明日期以证明已经过检查。Take each referenced document, check the installation in regard with the documentation, sign and date each document attesting that the checking has been done.相关部件合格证明文件编号 Ref : 步骤步骤/No./No.备注备注/ /Comments

43、Comments 20 / 40测试操作人测试操作人/ /TestTest performedperformed by:by:签名签名/Signature/Signature日期日期/ /DateDate测试所用计量仪器测试所用计量仪器/ /ListList ofof equipmentequipments s usedused : :附件列表附件列表/ /ListList ofof attachmentsattachments测试审核人测试审核人/ /TestTest reviewedreviewed by:by:签名签名/Signature/Signature日期日期/ /DateDate

44、合格合格 / / ConformoConformo不合格不合格 / / NonNon conformoconformo备注备注 / / CommentsComments : : 21 / 40前提前提/ / PrerequisitePrerequisite完成完成 / / CheckCheckN/AN/A目标目标 objectiveobjective给出文件依据，来说明纯水系统已经被正确安装了，和安装图上相一致。Provide documentary evidence that the water system has been installed and is correctly ident

45、ified inaccordance with existent installation drawings (As built diagrams and schemes).步骤步骤 No.No.测试步骤测试步骤StepStep descriptiondescription验证项目验证项目AcceptanceAcceptance criteriacriteria验证标准验证标准ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference1 1P& ID图安装验证中

46、用到的 P& ID 图编号能识别As Built P& Ids drawings used in installation verification are identified2 2管道部件竣工管道设施图中部件被确认The components are identified in As Built P&ID drawings3 3标签在图中确认的部件在安装中用标签标识The components are identified in the installation using tags4 4仪表仪表安装正确，容易读出上面的数字The instruments are c

47、orrectly installed , they are accessible and they can be easily read5 5获取一个 “竣工图”。Obtain a copy of the last version of “as built” P&ID drawings.在图上用黄色标示出已查过的部分。偏差用红色下划线标示。Indicate on drawingswhat has been checked (highlight in yellow). Underline in red any anomaly附上图纸。Join drawings to the test.操

48、作各部件都可以顺利地被操作，而且可以进行维修工作The access to the different components of the system is easy so operation and maintenance works can be done步骤步骤/No./No.备注备注/ /CommentsComments 22 / 40测试操作人测试操作人/ /TestTest performedperformed by:by:签名签名/Signature/Signature日期日期/ /DateDate测试所用计量仪器测试所用计量仪器/ /ListList ofof equipme

49、ntequipments s usedused : :附件列表附件列表/ /ListList ofof attachmentsattachments测试审核人测试审核人/ /TestTest reviewedreviewed by:by:签名签名/Signature/Signature日期日期/ /DateDate合格合格 / / ConformoConformo不合格不合格 / / NonNon conformoconformo备注备注 / / CommentsComments : : 23 / 40前提前提/ / PrerequisitePrerequisite完成完成 / / Check

50、CheckN/AN/A步骤步骤 No.No.验证项目验证项目StepStep descriptiondescription验证容验证容AcceptanceAcceptance criteriacriteria验证标准验证标准 ObservedObserved resultsresults合格与否合格与否C/NCC/NC偏差报告编号偏差报告编号AnomalyAnomaly referencereference1 1检查所有的重要仪器的计量证书，保证计量围和精确度符合工作需求Check that calibration certificates are available when needede

51、 and that the calibration range and precision of the calibration are adequate for the instrument range of work and precision required见下表See table below见下表See table below标签标签tagtag描述描述descriptiondescription是否需要计量是否需要计量NeedNeed toto bebe calibrated(calibrated(YESYES/NO/NO）检查计量标签检查计量标签ConformityConform

52、ity ofof certificatecertificate (yes(yes oror no)no)工作围工作围WorkWork scalescale测量围测量围MeasureMeasure scalescale精确度精确度correccorrectnesstness合格与否合格与否（C/NCC/NC）备注备注remarksremarksPHT-0101原水 PH 变送器是 yes5-80-142.5TT-0101原水温度变送器是 yes0-500-1002.5LT-0101原水箱液位变送器否 no0.-1.8m0-3.0m2.5TI-0101列管式换热器出水温度表是 yes0-1000-

53、2001.5PI-.0101列管式换热器工业蒸汽压力表是 yes0-0.4Mpa0-1.6Mpa1.5PI-0102多介质过滤器压力表Pressure meter of sand filter是 yes0-0.5Mpa0-0.6Mpa2.5PI-0103活性炭过滤器压力表Pressure meter of activated carbon filter是 yes0-0.4Mpa0-0.6Mpa2.5 24 / 40标签标签tagtag描述描述descriptiondescription是否需要计量是否需要计量NeedNeed toto bebe calibrated(calibrated(YE

54、SYES/NO/NO）检查计量标签检查计量标签ConformityConformity ofof certificatecertificate (yes(yes oror no)no)工作围工作围WorkWork scalescale测量围测量围MeasureMeasure scalescale精确度精确度correccorrectnesstness合格与否合格与否（C/NCC/NC）备注备注remarksremarksPI-0104精密过滤器进水压力表Pressure meterof precise filter是 yes0-0.3Mpa0-0.6Mpa2.5PI-0105高压泵进水压力表F

55、eed water Pressure meter of pump是 yes0-0.3Mpa0-0.6Mpa2.5PI-0106高压泵出水压力表Discharge water Pressure meter of pump是 yes0-1.6Mpa0-2.5Mpa2.5PS-0101高压泵进水压力开关Pressure switch of pump否 no0-0.2Mpa0-0.3Mpa1.5PI-0107反渗透膜浓水压力表Waste water Pressure meter of RO是 yes0-1.4Mpa0-2.5Mpa2.5PI-0108反渗透膜纯水压力表Waste water Press

56、ure meter of RO是 yes0-0.1Mpa0-0.6Mpa2.5FT-0101反渗透膜纯水流量变送器pure water flow meter of RO是 yes0-70LPM0-100LPM2.5FT-0102反渗透膜浓水流量计waste water flow meter of RO是 yes0-30LPM0-100LPM2.5CT-0101原料水电导率表Conductivity meter for RW是 yes0-1000s0-10000s2.5CT-0102反渗透膜电导率表Conductivity meter for RO是 yes0-30s0-100s2.5LT-02

57、01RO 水箱液位传感器Liquid level sensor LS-02否 no0.-1.6m0-3.0m2.5PI-0201EDI 纯水进水压力表Feed pure water pressure meter of EDI是 yes0-0.4Mpa0-0.6Mpa2.5PI-0202EDI 浓水进水压力表Dsicharge waste water pressure meter of EDI是 yes0-0.3Mpa0-0.6Mpa2.5 25 / 40标签标签tagtag描述描述descriptiondescription是否需要计量是否需要计量NeedNeed toto bebe cali

58、brated(calibrated(YESYES/NO/NO）检查计量标签检查计量标签ConformityConformity ofof certificatecertificate (yes(yes oror no)no)工作围工作围WorkWork scalescale测量围测量围MeasureMeasure scalescale精确度精确度correccorrectnesstness合格与否合格与否（C/NCC/NC）备注备注remarksremarksPI-0203EDI 纯水出水压力表Discharged pure water pressure meter of EDI是 yes0-

59、0.3Mpa0-0.6Mpa2.5PI-0204EDI 浓水出水压力表Discharged waste water pressure meter of EDI是 yes0-0.2Mpa0-0.6Mpa2.5FT-0201EDI 浓水进水流量计feedwaste water flow meterof EDI是 yes0-5LPM0-10LPM2.5FT-0202EDI 纯水出水流量计Discharged pure water flow meter of EDI是 yes0-60LPM0-100LPM2.5LT-0202纯水箱液位传感器Liquid level sensor 否 no0.-2.8m

60、0-3.0m2.5CT-0201EDI 出水电导率表Conductivity meter for Discharged water of EDI是 yes0-1s0-100s2.5步骤步骤/No./No.备注备注/ /CommentsComments测试操作人测试操作人/ /TestTest performedperformed by:by:签名签名/Signature/Signature日期日期/ /DateDate测试所用计量仪器测试所用计量仪器/ /ListList ofof equipmentequipments s usedused : :附件列表附件列表/ /ListList ofof attachmentsattachments