msp430LCD5110简单显示.

1、#includestdafx.h #includefont.hLCDWriteByte( /函数功能：写字节数据/函数入口：dat数据；comma nd:1为写 数据0为写指令函数出口：无voidLCDWriteByte(uchar dat, uchar comma nd uchar i; CLRB(LCD_PORT,LCD_CS; if(comma nd SETB(LCD_PORT,LCD_DC; else CLRB(LCD_PORT,LCD_DC; for(i = 0;i 8;i+ if(dat & 0 x80 SETB(LCD_PORT,LCD_DIN; elseCLRB(LCD

2、_PORT,LCD_DIN; CLRB(LCD_PORT,LCD_CLK; dat = dat 1;SETB(LCD_PORT,LCD_CLK; SETB(LCD_PORT,LCD_CS; LCDSetAddr( /函数功能：写地址函数入口：X:行；Y:列函数出口：无void LCDSetAddr(ucharX, uchar Y LCDWriteByte(0 x40 | Y, 0; / column LCDWriteByte(0 x80 | X, 0; / row LCDWriteChar( /函数功能：写字符/函数入口：asc字符/函数出口：无voidLCDWriteChar(uchar a

3、sc uchar line; asc = asc-32; for (li ne=0; li ne 0;i-LCDWriteChar(ni-1+0; /从ACSII码表中读取字节，然后写入液晶LCDWriteString( /函数功能：写字符串函数入口：地址坐标X，Y字符串起始指/函数名称:乍十*S /函数 出口：无/* voidLCDWriteString(uchar X,uchar Y,char *s LCDSetAddr(X,Y; /光标定位while (*sLCDWriteChar(*s+; /* /LCDClear( /函数功能：LCD清屏/函数入口：无/函数出口：无/* void L

4、CDCIear( uint i j;LCDWriteByte(OxOc, 0; LCDWriteByte(0 x80, 0; for (i=0; i 84; i+ for(j = 0;j 6;j+LCD/ritcBytc(0 x00 1 /*/函数名称：LCDInit( /函数功能：LCD初始化/函数入口：无/函数出口:LCD In it( CLRB(LCD_PORT,LCD_RST; SETB(LCD_PORT,LCD_RST;CLRB(LCD_PORT,LCD_CS; SETB(LCD_PORT,LCD_CS; LCDWriteByte(0 x21, 0; /使用扩展命令设置LCD模式LCDWriteByte(0 xc8, 0; /设置偏置电压LCDWriteByte(0 x06, 0; /温度校正LCDWriteByte(0 x13, 0; / 1:48LCDWriteByte(0 x20, 0; /使用基本命令LCDClear(; /清屏LCDWriteByte(0 x0c, 0; /设定显示模式，正常显示CLRB(LCD_PORT,LCD_CS; /关闭LCD 函数功能：显示函数入口：无函数出口：无voidDisplay( LCDClear(; LCDWriteStri ng(0,0,