LED智能灯具说明书20XX_第1页
LED智能灯具说明书20XX_第2页
LED智能灯具说明书20XX_第3页
LED智能灯具说明书20XX_第4页
LED智能灯具说明书20XX_第5页
已阅读5页,还剩2页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、LED智能灯具说明书20XX深圳市无线创意光电科技有限公司LED智能灯具说明书一:LED红外感应+声控+光控球泡灯,吸顶灯,灯管图 片LED infrared induction + voice + light bulb lamp,ceiling lamp, lamp picture红外感应球泡灯红外感应灯管红外感应吸顶灯二:适用范围:楼道,走廊,酒店,超市,家庭,会所,商场,医院, 大厦等地方。每天需长时间照明的场所使用效果最佳;三:LED红外感应声控光控球泡灯说明:LED智能球泡:无需拉线,无需开关,使用非常方便。Intelligent LED bulb: automatic sensin

2、g switch, convenient, no manual turn on andoff.1、LED 光控球泡(light sensing LED bulb)功能介绍(Function)当环境亮度低于 25LUX,球泡自动点亮;当环境亮度高于25LUX球泡自动退出灭掉。Light turns on automatically when ambient brightness is below 25 Lux and it turns off when ambient brightness is above 25 Lux.2、LED 红外感应球泡(infrared sensing LED bul

3、b)功能介绍(Function) 通电时感应球泡温机 30秒,然后灭掉进入感应状态。Light turns up for 30 seconds after power on, thenenters the sensing status (light off). 当环境亮度低于 10LUX时,人进入感应球泡的感应 范围内灯会自动亮,亮一次的时间为2分钟(可以设置时间)。At ambient brightness below 10 Lux (twilightstatus), the LED light turns on automatically for 2minutes whenever the

4、re is a person within sensing area. Different light-up time can be set. 感应球泡感应范围为半径5M。感应一次亮灯2分钟,如人一直在感应区域 并间隔活动,感应球泡会一直亮。Infrared sensing range is 5 meters radius. It lights up for 2 minutes each time and continues to light up as long as a person stays in the sensing area withintermittent movements.

5、感应球泡安装的高度 M太高太低会影响到感应区域。Installation height is 2-4 meters. Sensing area can be affected if installation is too higher or too lower.3、LED 声光球泡(sound and light sensing LEDbulb) 功能介绍(Function):通电时感应球泡温机30秒,然后灭掉进入感应状态。Light turns up for 30 seconds after power on, thenenters the sensing status (light off

6、).当坏境亮度低于10LUX时,声音大于 60db时球泡会自动亮,亮一次的时间为2分钟(可以设置时间)。At ambient brightness below 10 Lux (twilight status), light turns on automatically for 2 minutes whenever there is a sound greater than 60db. Different light-up time can be set.声光球泡感应范围为半径8M,声音越大感应的距离越远。感应一次亮灯 2分钟,如人一直在感应区域发出间隔声 音,感应球泡会一直亮。Sound se

7、nsing area is 8 meters radius. Sensing distance increases as the sound loudness increases.Light turns on for 2 minutes each time and stays on ifintermittent sound keeps on in the sensing area.4、LED声光红外感应球泡(infrared and sound sensing LED bulb)功能介绍(Function):通电时感应球泡温机 30秒,然后灭掉进入感应状态。Light turns up for

8、 30 seconds after power on, then enters the sensing status (light off).当坏境亮度低于10LUX时,人进入球泡的红外感应范围 内或声音高于60分贝,那种讯号先进入灯会自动亮,亮一次的时间为 2 分钟(可以设置时间)。At ambient brightness below 10 Lux (twilight status), light turns on automatically for 2 minutes whenever there is a person in the sensing area or a sound gr

9、eater than 60db. Different light-up time can be set.球泡红外感应范围为半径5M,声音感应距离为8M。感应一次亮灯2分钟,如人一直在感应区域并间隔活动或说话,感应球泡会一直亮。Infrared sensing area is 5 meters radius. Sound sensing area is 8 meters radius. Light turns on for 2 minutes each time and stays on if intermittent body movement ort sound stays in the s

10、ensing area.感应球泡安装的高度 M太高太低会影响到感应区域。Installation height is 2-4 meters. Sensing area can be affected if installation is too higher or too lower.5、LED双亮红外感应球泡(dual bright infraredsensing LED bulb)功能介绍(Function):通电时感应球泡微亮,如9W球泡微亮为。当人或车进入感应球泡的感应范围内灯会全亮,全亮一次的时间为2分钟(可以设置时间)。Light stays at 20%of full brigh

11、tness (for example, it uses only for a 9W bulb). It turns to fullbrightness automatically when a person or car goes into the sensing area. Full brightness stays for 2 minutes (different time can be set).感应球泡感应范围为半径5Mo感应一次亮灯2分钟,如人或车一直在感应区域并间隔活动。感应球泡会一直全亮。当人或车离开了,2分钟后感应球泡进去微亮 (20%)状态。Infrared sensing

12、area is 5meters radius. Full brightness stays for 2 minutes orstays on whenever there is intermittent body movementin the sensing area. It returns to 20%brightness after2 minutes or after the person or car leaves the sensingarea.感应球泡安装的高度M太高太低会影响到感应区域。Installation height is 2-4 meters. Sensing area

13、can be affected if installation is too higher or too lower.6、LED双亮双控感应球泡(dual bright and soundsensing LED bulb)通电时感应球泡微亮,如9W球泡微亮为。当人或车进入感应球泡的感应范围内,或声音高于60分贝,那种讯号先进入灯会自动全亮,亮一次的时间为2分钟(可以设置时间)。Light stays at 20%of full brightness (for example, it uses only for a 9W bulb). It turns to full brightness au

14、tomatically when a person or car goes into the sensing area or sound is over than 60 db. Full brightness stays for 2 minutes (different time can be set).球泡红外感应范围为半径5M;声音感应距离为半径8M,60分贝以上。感应一次亮灯2分钟,如人一直在感应区域并间隔活动或间隔声音,感应 球泡会一直全亮。Infrared sensing area is 5 metersradius. Sound sensing area is 8 meters radius. Full brightness stays for 2 minutes or stays on whenever there is intermittent body movement in the sensing area.It returns to 20% brightness after 2 minutes or afterthe person

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论