李宁服装材料检测送样要求

1、李宁服装材料检测送样要求1, 送检面料及印花时必须填写：面料厂、服装厂、面料编号、面料名称、服装款号或产品 季节、成分等。for fabric and printing, filling in "material vendor, garment factory, fabric/printing no., material, garment style no. and season, fiber composition etc.h is necessary2, 送检时必须提供纸板自检报告（附样品中）及电子版报告给实验室。attached with self test report bo

2、th in paper and email is necessaiy3, 研发送检时必须按服装小类和功能性需做相应全项检测（须测项目请打勾）。for r&d sample, must select test item according to garment1 sort and function.4, 针织类如果缩水不合格必需与克重同时复检（须测项目请打勾），起球不合格必需与克重、 顶破强力同时复检（须测项目请打勾）。for knit type of materials, if shrinkage fails the material must be retested for shri

3、nkage and weight （put a check mark in the box besides the testing item）. if pilling fails, the material must be retested for its pilling, weight and bursting strength（put check in the box beside testing item）.5, 认可实验室工厂也需依照此原则执行复检。the principle is also applied to the certified factory lab.6, 面料全项目检测

4、必须提供3米以上。for all test item, more than 3 meters fabric is necessary.7, 各检测项目需要的而料数量如下，（单项目的送检样品必须离开布边10cm以上,并注明正反面及经纬向）：quantity of fabric for each test item as below （for the single test item, pls mark face/back and warp/weft, and the sample must be at lest 10cm deviated from the edge of fabric）.各项目

5、送样要求/sampling requirement:耐皂洗色牢度:>15cm*15cm（ep花片:2片）color fastness to washing:>15cm*15cm（printing 2pcs）耐摩擦色牢度:>30cm*30cm（ep花片:2片）color fastness rubbing:>30cm*30cm（printing 2pcs）耐水色牢度:>15cm*15cm（ep花片:2片）color fastness to water:>15cm*15cm（printing 2pcs）耐汗渍色牢度:>15cm*15cm（ep花片:4片）co

6、lor fastness to perspiration:>15cm*15cm（printing 4pcs）互染色牢度:每色>15cm*15cmcolour fastness to cross staining for every colour:>15cm*15cm耐光色牢度:>20cm*20cmcolour fastness to light:>20cm*20cm耐光汗色牢度:>20cm*20cmcolour fastness to light-perspiration:>20cm*20cm色迁移:面料色迁移>30cm*30cm,印花色迁移&g

7、t;4片，或成品一件dye transfer:>30cm*30cm for fabric, 4pcs for printing or one garment缩水率:整幅宽*直向80米shrinkage: full width *80cm in length撕破强力:>50cm*50cmtearing strength:>50cm*50cm纸裂:>80crrf 80cm（或 3 件/条）seam slippage:>80cm*80cm（or 3 garments）裤后裆接缝强力：3件/条seam slippage at back raise:> 3 garme

8、nts密度:>30cm*30cmthreads per unit length:>30cm*30cm克重:>80cm*80cmmass per unit area:>80cm*80cm顶破强力:>50cm*50cmbursting:>50cm*50cm印花片耐寒（防冻）:>2片cool resistant for printing:>2pcsph值:>5克或3（t30cm（印花片:印花部位取5克样品） ph value:>5g or 30*30cm（printed fabric: 5g of printing）甲醛:>5克或30*30cm（印花片:印花部位取5克样品）formaldehyde:>5g or 30*30cm（printed fabric: 5g of printing）偶氮:>50cm*>50cmazo dyestuff:>50cm*>50cm起球:50cm*50cmfuzzing and pilling:>50cm*50cm钩丝:>80cm*80cm snagging:>80cm*80cm成份:>10 克或 30cm*30