版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、Technology Development Contract 技术开Contract No.: P-1309- 33 Date:2013-11-08 Entrusting Party (Party A): 委托方(甲方) :Address:地址: Tel:Fax: Entrusted Party (Party B):受托方(乙方): Address: 地址: Tel: Fax: Party A entrust Party B to research and develop Technique Proposal Of Smart T/R Verification System. Party B
2、 will develop key circuits verification for the Solution and will be in charge of general thought plan.The following articles are reached and abided by the both parties. 甲方委托乙方设计智能收发 验证系统技术方案,乙方将设计开发方案的验证电路及负责整体思路的 建 立,为此订立以下协议,并由双方共同恪守。 Article 1 Definitions 第一条 定义 1.1 Technique Proposal Of Smart T
3、/R Verification System (hereinafter referred to as “theSolution ”)shall mean all the required techniques to construct the general idea which will commit the attached technical requirements. The Solution shall include all technical details of all designing schemes and experimental verification for ke
4、y circuits智能收发验证系统技术方案(以下简称方案”),是指设计满足附件要求的总体技术方案,所需要的解决方案。该解决方案包括全部设计方案资料及关键电路验证技术资料。1.2Technicaldocumentations shall mean all the necessary documents to design the Solution and all the verification documents that Party B will use in designing the Solution. 技术资料,指研发解决方案所必需的资料,包含乙方在设计方案的过程中,所使用的全部有关
5、验证技术资料1.3 “ R&D shall mean research and development. R&D ,是指研究和幵 发。1.4” T/R” shall mean transmit and receive. “T/R”,是指发射和接收。 1.5” Soc” shaliean system on chip. “ SOC 是指系统级芯片。1.6” ASIC” shall maeapnplication specific integrated circuit. 1”ASIC” 专用集成电路。Article 2 Contents & scopes of contract第二条合同内容和范围
6、 2.1 The requirements of the contract Solution 合同技术方案要求 2.1.1 TechnicalContent: 技术内容 (1)Design technical proposal; 设计技术方案; (2)Key circuits verification;验 证 关 键 电 路 ; (3)Detailed technicalrequirements see technique attachment. 详细技术要求见技术 协议附件。 2.1.2 Technical Method and Strategy:技术方法和路 线 Should adopt
7、SOC and ASIC technology; SOCAS采 用和技 术; (2) Should adopt the smart T/R system to verify the key circuits. 采用智能收发组件系统对关键电路进行实验验证。2.2 The obligationsof both parties 双方义务 2.2.1 Party B shall submit the R&D plan to Party A within two months after this contract comes into effect. 2乙方应在本合同生效后个月内向甲 方提交研究开发计
8、划。 2.2.2 Party B shall accomplish the Solution design work according to the following schedul:e 乙 方应按下列进度完成方案设计工作: (1)Phase one 第一阶段: 1)Initialization phase: select foundary, obtain design documents,analyze process files, establish computer system, rent and purchaseEDA software, primary communicate
9、design thought of verification circuits and general Solution; ED 启动阶段: 晶圆厂 的选定、设计文件的获得、工艺文件的分析、计算机系统的建 立、软件的租用及 购买、验证电路与整体方案设计思路的初 步沟通; 2)Design phase: module division of chip, principle design, computer simulation, layout design; 设计阶段:芯片的 模块划分、原理设计、计算机仿真、版图设计; 3)Test phase: primary test and consecu
10、tive test. 测试阶段:初测及继续测试。 (2)Phase two: Alter the Solution according to the first phase results, and start second run. 第二阶段:根据第一阶段测试结 果对方案进行修改,同时配合总体设计进行修改。2.2.3Withthe both parties confirmation and on the request of Party A, Party B shall provide technical guidance and training to the personnel desi
11、gnated by Party A or provide the technical service related in the fulfillment Solution after the Solution is qualified by the verification circuits.双方确定,乙方应在合同方案的关键电路验 证合格后,根据甲方的请求,为甲方指定的人员提供技术指 导和培训,或提供与完成方案相关的技术服务。2.2.4 Withthe confirmation of the both parties, within the validity of the Contract,
12、 Party A shall 2designateas Party A sproject contact person. Party B shallappoint as Party B s project conptearcston. If any changes of thecontact person occur, one party shall inform the other party based on written materials in due time. If one party fails to promptly inform the other party, it sh
13、all be held responsible for any influence or damage caused by the untimely notification during the performance of the Contract.双方确定,在本合同有效期内,甲方指定为甲方项目联系人,乙方指定为乙方项目联系人,一 方 变更项目联系人的,应当及时以书面形式通知另一方。未及 时通知并影响本合同履行或造成损失的,应 承担相应的责任。 2.3 Delivery 交付 Party B shall deliver the contract Solution to party A in
14、 accordance with the contents as specified in item 2.2.2 of the contract. 2.2.2 乙方应按本合同条款规定的内容,将合同方案技 术资料交付甲方。 2.4 Assessment & Acceptance 合同方案的验 收 Confirmed by the both parties, Party A shall adopt the signed standards and methods to examine and accept the contract Solution by Party B. 双方确定,按所签订的验收
15、标准对乙方完 成的合同方案技术进行验收。 2.4.1 To ensure that the contract Solution supplied by party B is correct reliable and advanced , Party A,B shall jointly perform the assessment and acceptance of the technical Solution and core circuit in accordance with the provisions of items 2.1-2.3 of the contract and techn
16、ique attachment. if the technical Solution are qualified, both parties shall jointly sign a certificate of acceptance in two copiesone for each party. ,2.1-2.3 为了保证乙方提供合同方案的正确性、可靠性和先进性,由甲乙双方技术人员一起,按本合同及.技术协议附件规定,共同对技术方案设计和核心电路进行考核和验收 考核验收合格后,双方代表要签署 验收合格证书一式两份, 双方各执一份为凭。 2.4.2 If the Solution cannot
17、 meet the requirements of the contract, both parties shall hold friendly discussions to analyze the reasons and take measures to correct any defect and prepare for the second assessment and acceptance of the contract Solution. If the Solution are still not qualified after the second assessment and a
18、cceptance and the responsibility lies in Party B ,Party B shall be responsible for all the losses thus caused, Party A shall have the right to terminate the contract and raise a claim against Party B according to Article 6 if the responsibility lies in Party A, both parties shall mutually ; discuss
19、the further implementations of the contract. 如果考核验收达不到本合同的规 定要求,则双方要友好协商,共同研究分析原因,采取措施, 消除缺陷,进行第二次的考核和验收。若经过第二次考核仍不 合格,如属乙方责任,则乙方应承担由此而造成一切 6 损失, 甲方有权终止合同并按第条的规定由甲方向乙方索赔,如属甲 方责任,则双方应共同协商本合 同的进一步执行问题。 2.5Contract technical Solution results and related intellectual propertyownership 合同技术方案研发成果及相关知识产权的
20、归属 Confirmed by the both parties, the technical Solution results and related intellectual property right generated from the Contract shall be settled by the following methods. 双方确定,因履行本合同 所产生的研究开发成果及其相关知识产权权利归属,按以下式 处理: 2.5.1 Party A has the right to apply for the patents. The use and the relevant a
21、llocation of benefits after obtaining the patent right are as following: Party A will own the patent right and benefits . 3 甲方享有申请专利的权利。专利权取得后的使用和有关利益分 配方式如下:专利权为甲方所有,利益归 甲方所有。 2.5.2 The profit caused from the use and transfer of the ownership of patent right shall be dealt by the following ways: :有
22、关使用 和转让的权利归属及由此产生的利益按以下约定处理 (1) The right to use technical secret: Owned by party A; : 技术秘密的使 用权归甲方所有; (2) The right to transfer technical secret: Owned by party A; : 技术秘密的转让权归甲方所有; (3) The method to allocated the relevant benefits: Owned by party A; : 相关利益的分配办法归甲方所有。 2.5.3 The owner of the physical
23、fixed property which were bought by Party B rights of equipments, instruments procured with the funds of research and 研究开发工作有关的设备、仪器等实物固定财产,归乙方所有。development is Party B 。乙方利用研究开发经费所购置与2.5.4 With the both parties confirmation, Party A has the right toutilize the research and development achievements
24、provided by Party B in accordance with the stipulation in the Contract to make follow-up improvement. Thereby the new technologic achievements with the feature of substantial or creative technology progressand its right adscription shall be shared by Party A . The detailed allocation of the related
25、benefits shall be as follows: Owned by party A 。 双方确定,甲方有权利用乙方按 照本合同约定提供的研究开发成果,进行后续改进。由此产生 的具有实 归质性或创造性技术进步特征的新的技术成果及其 权属,由甲方享有。具体相关利益的分配办如下: 甲方所有。2.5.5 After the accomplishment of the R&D works stipulated in the Contract, Party B has the right to take use of the research and development achievemen
26、ts to make follow-up improvement. Thereby the new technologicachievements with the feature of substantial or creative technology progress shall be owned by Party B . The detailed allocation of the related benefits shall be as follows: Owned by Party B. 乙方有权在完成本合同约定的研 究开发工作后,利用该项研究开发成果进行后续改进。由此产 生的具有
27、 实质性或创造性技术进步特征的新的技术成果,归 乙方所有。具体相关利益的分配办法如下:归乙 方所有。Article 3 Contract price 第三条合同价格 3.1 According to the contract contents and scopes as specified in Article 2, the total price of the contract Solution provided by Party B includingthe designs, drawings, technical service and training shall amount to
28、按第二条所规定的合同内容和范围,乙方所提供的合同方案包 括设计方案、设计图纸、技术服务和技术 培训等的全部资 料总价格为美元。 3.2 The above contract price is fixed and shall include the expenses of all the technical documentation specified in Article 2 of the contract. Such contract price shall also include the expenses for party B to carry out the other contr
29、act obligations of this contract上述合同的价格为固定价格,包括本 合同第二条所规定的全部技术资料。该价格包括乙方在本合同 中所 4承担的其他义务的全部费用在内。 3.3 All the calculations and payment of expe n ses of this contract shall be in US dollars. 本合同内的一切费用均以美元计算和结算。 Article 4 Payment & Payment conditions第四条支付与支付条件 4.1Initialization expenses after contract
30、signing: Party A shall pay eighty thousand dollars to Party B; 8合同签订后启动费用:甲方 支付乙方万美元; 4.2After the whole primary Solution provided by Party B is qualified, Party A shall pay one hundred and twenty thousand dollars to Party B; 12;乙方整个初步方案通过后,甲方 支付乙方万美元 4.3After selecting foundary , Party A shall pay
31、one hundred and fifty thousand dollars to Party B; 15选定晶圆厂后,甲方支付乙方万美元; 4.4After providing the design Solution and simulated results, Party A shall pay three hundred thousand dollars to Party B; 30 提供设计方案及模拟结果后,甲 方支付乙方万美元; 4.5After providing verification circuits and qualified, Party A shall pay eigh
32、t hundred and seventy thousand dollars to Party B. ,87 测试电路提供后并验证了电路后甲方支付 乙方万美元。 Article 5 Infringements and Confidentiality 第 五条侵权和保密 5.1 Party B guarantees that the Solution supplied by each party without any interference or charge from any third party. In case of any interference or charge from a
33、 third party, they shall be handled by each party and the third party. the responsibilityand loss, either legally or economicallyshall be , borne by party B. 乙方保证所提供的总体方案不受任何第三者干 涉和指控。如果发生第三者干涉和指控,则由乙方负责同 第 三者进行交涉,并由其承担法律上和经济上的全部责任和损失。5.2 After termination of the contract term, Party A shall still h
34、ave the right to use the Solution and technical documentations to manufacture relevant products. 在本合同终止后,甲方仍有权 继续使用乙方提供的技术方案和全部技术文件进行相应产品的 生产。 Article 6 Guarantees and Claims 第六条保证和索赔6.1 With the both parties confirmation, either party breaches theContract and thereby causes a standstill, delay or f
35、ailure in research and development work, the responsible Party shall undertake the responsibility according to the following stipulations 双方确定:任何一方违反本合同约定,造成研究开 发工作停滞、延误或失败的,按以下约定承担违约责 : 任 5 (1)If Party A breaches Article 4 in the Contract, the responsible party shall pay pursuant to the amount of t
36、en percent (10%) of the contract price (methods for computing the amount of breach of contract damages and the compensation for losses). 4 10% 甲 方违反本合同第条约定,应当按合同总额的赔偿支付(支付违 约金或损失赔偿额的计算 方法)。 (2)If Party B breaches Article 2 ,4 or 5 in the Contract, the responsible party shall pay pursuant to the amou
37、nt of ten percent (10%) of the contract price (methods for computing the amount of breach of contract damages and the compensation for losses). 2 4 5 10% 乙方违 反本合同第、或者条约定,应当按合同总额的赔偿支付(支付 违约金或损失 赔偿额的计算方法) 。 6.2 As for the liability for risks involved in a failure or partial failure in research and dev
38、elopment caused by insurmountable technical difficulties under the current technology and condition occurring in the process of performance of the Contact, it shall be undertaken by the bothparties in accordance with the following stipulations: undertaking by both sides appointments, appointments fi
39、rst .Confirmed by both parties, the technical risk stipulated in the Contact shall be assessed in the manner of acquirements of authority accepted . The main content of the technical risk assessment shall include its existence, scope, degree, loss and so on. The technical risk assessment should have
40、 the following basic conditions :在本合同 履行中,因出现在现有技术水平和条件下难以克服的技术困难, 导致研究开发失败或部分失败, 并造成一方或双方损失的, 双方按如下约定承担风险损失:双方约定承担,约定优先。双 方确定,本 合同项目的技术风险按当事人认可的专家权威 机构确认的方式认定。认定技术风险的基本内容应当 包括技 术风险的存在、范围、程度及损失大小等。认定技术风险的基 本条件是: (1)The technique mentioned in the Contract is difficult enough for the present technolog
41、ic level;本合同技术在现有技术水平条件下具有足够的难度; (2)Party B subjectively commits no fault and the failure of research and development is considered by experts as reasonable. 乙方在主观上无过错且经认定研究 开发失败为合理的失败。 6.3 Once one party discovers that the situation is likely to cause a failure or partial failure in research and de
42、velopment, the Discoverer shall inform the other party of the situation within five days and take appropriate measures to reduce losses. If one party fails to inform the other party in due time and take appropriate measures and as a result the losses are aggravated, the responsible Party shall bear
43、the liability for the aggravated part of the losses. 5 一方发现技术风险存在并有可 能致使研究开发失败或部分失败的情形时,应当在日内通知另 一方并 采取适当措施减少损失。逾期未通知并未采取适当措施 而致使损失扩大的,应当就扩大的损失承担赔偿 责任。 6.4 In the performance of the contract, the technology which is the object of a research and development has been made public by others (including t
44、he form of patent). One party shall notify the other party to rescind the contract within three days. If one party fails to inform the other party in due time and as a result the other party losses occur, the other party has right to claim compensation for its losses. 3 在本合同履行中,因作为研究开 发标的的技术已经由他人公开(
45、包括以专利权方式公开) ,一方 应在 日内通知另一方解除合同。逾期未通知并致使另一方产 生损失的,另一方有权要求予以赔偿。 Article 7 Taxesand Duties 第七条税费 6Any tax relating to the implementation of the contract imposed shall be afforded by each party respectively. 甲乙双方将各自承 担所在国(地区)所应支付的税费。 Article 8 Force Majeure第八条不可抗力 Force majeure shall refer to war, flood
46、, fire, typhoon, earthquake and other accidents that both parties mutually agree as force majeure. In case of force majeure, the affected party shall notify by telex or cable the other party of the accident as soon as possible and send by registered air - mail to the other party the evidence issuedb
47、y the local government within 14 days from the accident. if the implementation is affected by force majeure and the accident lasts for more than 20 days, both parties shall hold friendly discussions as soon as possible with regard to the further implementation of the contract. 人力不可抗力的因素,如 战争、严重水灾、火灾
48、、台风、地震,以及双方同意的其他人 力不可抗力因素。发生人力不可抗力的责任方应尽快将发生人 力不可抗力事故的情况,在尽可能短的时间内,用电传或电 14 报通知另一方,并于事后天内,以航空挂号信将有关政府当局 出具的证明文件给另一方,予以认证。 20 因发生不可抗力而影 响了合同的执行,如果事故延续天以上,则双方应尽快通过友 好协商方式协商 合同的进一步执行问题。 Article 9 Arbitration 第九条仲裁 All disputes in connection with this Contract or the execution thereof shall be settled f
49、riendly through negotiations. In case no settlement can be reached, the case may then be submitted for arbitration to the China InternationalEconomic and Trade Arbitration Commission (Beijing) in accordance with its Arbitration Rules .The arbitration shall take place in Beijing and the decision of t
50、he Arbitration Committee shall be final and binding upon both parties; neither party shall seek recourse to a law court or other authorities to appeal for revision of the decision. Arbitration fee shall be borne by the losing party. 所有与此合同有 关的争议应通过友好协商解决,若通过协商无法达成一致,此 争议应提交中国国际经济 , 贸易仲裁委员会进行仲裁。仲裁应 在
51、北京进行其结果对双方均有约束力,任何一方均不应向法院 或其 他政府部门申请以改变仲裁结果。仲裁费由败诉方负担。 Article 10 Effectiveness of the Contract and Miscellaneous 第十 条合同的生效及其他 10.1 After this contract is signed by the duly authorized representatives of both parties both parties , shall submit the contract to their governments or boards of directo
52、rs for approval, the date when the later party obtains the approval shall be taken as the effective date of the contract. Both parties shall attempt to get the contract approval within 60 days from signing and notify by telex or cable the other party of the approval which is confirmed by the followi
53、ng registered air - mail letter. 本合同由双 方代表签订后,双方分别向各自的政府或审理机构申请批准, 以最后批准一方的日期为合同 60 生效日期。双方均应尽最大努 力在天内获得批准,并用邮件通知另一方。 10.2 Any changes or amendments to the contract cause shall be mutually agreed upon by both parties and signed by duly authorized representatives. Such changes or amendments shall be
54、an integral7part of the contract and have the same force as the other clauses. 本合同条款的任何改变,修改或增减,均需经双方协商同意后 双方授权各自的代表签署书面文件,作为 本合同不可分割的 一部分,与合同其他条款一样具有同等的效力。 10.3 With mutual confirmation, one party can notify the other party to cancel the Contract under the following conditionswhich make the performance of the Contract unnecessary or impossible. 双 方确定,出现下列情形,致使本合同的履行成为不必要或不可 能的,一方可以通知另一方解除本合同;(1) Because of ForceMajeure or technical risks; 因发生不可抗力或技术风险 (2) Technicalrisks appear, Technologyrisk is that the party makes great efforts to fulfill the contract, but current levels cannot be achi
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2024年鲁教版选修1化学下册阶段测试试卷含答案539
- 2024年度职工死亡赔偿金及抚恤金支付协议3篇
- 植物的生存战略课程设计
- 海水换热器课程设计
- 2021-2022学年浙江省杭州市余杭区四年级下学期期中语文真题及答案
- 人教版高中物理必修第三册第十章静电场中的能量10-2电势差练习含答案
- 2024年渔船买卖及水域资源合作开发合同3篇
- 2024年人民版七年级科学下册阶段测试试卷262
- 土木建筑概论课程设计
- 2020-2021学年福建省厦门市思明区前埔南区二年级下册语文真题及答案
- 知识产权法(重庆工商大学)智慧树知到答案章节测试2023年
- 对外汉语初中级HSK4级语言点
- AutoCAD计算机绘图全套教程
- 活动会议就餐签到表
- 设备类供应商评估表
- 四柱型液压机的液压系统设计毕业论文
- YY/T 0698.2-2022最终灭菌医疗器械包装材料第2部分:灭菌包裹材料要求和试验方法
- YY/T 0698.9-2009最终灭菌医疗器械包装材料第9部分:可密封组合袋、卷材和盖材生产用无涂胶聚烯烃非织造布材料要求和试验方法
- SB/T 10610-2011肉丸
- JJF 1619-2017互感器二次压降及负荷测试仪校准规范
- 2023年浙江首考英语试题(含答案)
评论
0/150
提交评论