规格响应表.doc

SPECIFICATION COMPLIANCE FORM规格响应表ITB NO.: 08BJDRKMEKITI Name of Supplier：_I. County kit: Equipment Updated version will be provided laterNo. ITEMSPECIFICATION (REQUIREMENT)SPECIFICATION (RESPONSE)技术参数，特点（应标规格）Remarks备注1Ultrasound scannerPurpose:It is for use at County Hospital where patients with complications are referred.It will be used to screen patients for OBSTETRIC and GYNECOLIGIC Disorder and problemsIt is alsoused to check position of IUDs for FP acceptors.to provide Ultrasound scanner for County Hospitals.it can be also used for twin pregnancies and for other clinical indications.- Scanner ultrasound portable system main unit can be used for: general abdominal imaging, obstetric and gynecology imaging, small part imaging, neonatal head and hip imaging, vascular imaging, urology imaging including prostate, and intraoperative imaging- Easy to use and to carry- Supplied with instruction manual covering: item description and function, how to use the item, its maintenance and spare-parts.- This item is supplied as a set.General Description:Ultrasound scanner, with standard OB/GYN linear probe of 3.5 MHz and video printer,portable, set, 3 additional probes, one linear probe Technical specifications:- High performance portable ultrasound system main unit- Easy to carry: compact and lightweight- Easy to use: uncomplicated controls, straight forward operation- Scanning method: electronic convex sector, electronic linear- Imaging display modes: B, dual B, M, B and M- Imaging technologies: dynamic frequency imaging, multi-stage focusing, aperture control- Image gray-scale: 64 levels- Depth range selection: convex sector image and linear image, 3 steps- Image orientation: lateral and vertical inversion (in B mode)- Measurement and analysis: Caliber control: trackball On B-mode image: distance, area and circumference by either ellipse or trace method, volume, ratio, gestational age, foetal weight, angle. Gestational table: user programmable On M-mode: velocity, time interval, depth, heart rate, LV function- Characters & graphics: Patient information, annotation area, body mark display Automatic display: date and time, focal point setting, image orientation mark, image scrolled position, distance scale mark, M-mode time mark, gray scale for callibration. Automatic display selectable On/Off : gain setting, near gain setting, far gain setting, probe frequency, puncture guide line.- Viewing monitor: 7-inch diagonal monitor with non-reflexion filter- Video output: 625 lines/frame- Power requirement: 220/240V +/- 10%, 50/60 Hz, approx 160VA.- Environmental requirements: In operation: temperature,-10 to +40 degrees C, relative humidity (30 to 85% non condensing). In storage: temperature,-10 to +50 degrees C, relative humidity (10 to 90% non condensing).- Scanner, ultrasound, portable, must be in conformity with Council Directive 93/42/EEC on Medical Devices and have a CE marking- Supplied with clear instructions for use/diagrams for assembly in 3- languages (English, French and Spanish), list of accessories/parts.- Set components: Scanner, ultrasound, portable is supplied as a complete setComprising:1 x scanner Ultrasound portable system main unit with accessories1 x electronic Convex sector probe standard: frequency3.5MHz, scanning angle 60 degrees, radius 60mm1 x electronic Convex sector probe high density transvaginal,IVF: frequency 5MHz, scanning angle 90 degrees, radius 14mm1 x video printer, 220V2JellyJelly, for above I 1 ultrasound scanner.3Printing paperPrinting paper, For above I 1 ultrasound scanner (roll) 4Automatic Voltage RegulatorTechnical Specifications: Input Voltage: 140260V 5KVA above 160250VOutput Voltage: 200V3% 1104%Phase: single-phaseFrequency: 5060HzRegulation Time: 15V/secondMaxim Rating (KVA): 5Output currentSurge protection: 2455VDelay output time: short delay period 3-7 secondsEnvironmental temperature:-5+40Temperature Rise: 95%Pressure Endurance: in line with Ministry standard5IncubatorGeneral Description:Incubator, Automatic for use in neonatal intensive care unit Technical Specifications: Incubator, automatic for use in neonatal intensive care unit. Incubator, automatic is operated by electricity.Canopy: approx. 90 x 45 x 43 cm.Front panel: inclined side, 2 large doors with 2 part holes.Rear: 2 part holes.Apertures for tubes (4).Combined silent window rotation and closing system.Fixed tray with tilt position (+/- 10).Transfer handle and 4 swiveling castors diam. Approx. 125 mm (2 with brakes).Protection rail and accessories support on 4 sides.Incubator performance:Power:600 w/1200 w.Electrical supply: 220 V /240 V, +/- 10%.Time required to get to 37C and stabilize, starting at 25C:18 mm.Measurement accuracy: +/- 01C.Sound level not exceeding: 45Db(A).Oxygen inlet with automatic safety device limiting the oxygen flow to 35%.Adjustable hygrometer between 40% and 80%.Ambient temperature control from 28C to 39C, skin temperature 35C to 38C.Incubator monitoring:Temperature adjustment control, electronic surveillance system ensured by microprocessor.Microprocessor watchdog control.Safety availability test every 5 mm.Permanent automatic verification of probes and control heating devices.Integrity test of operating parameters.Measurement interface test.Possible technical monitoring via PC (trough communication plug).Audible and visual alarms, i.e. the air and skin too hot or too cold (adjustable thresholds) fan failure, system failure, power failure, skin probe failure.Incubator, automatic must be in conformity with Council Directive 93/42/EEC on Medical Devices and have CE marking.Supplied with clear instructions for use / diagrams for assembly in 3 languages (English, French and Spanish), list of accessories / parts.Incubator is supplied with:1 x Skin probe.1 x Dual compartment right cupboard.2 x IV poles.3 x Air filters.6AutoclaveGeneral Description: Steam sterilizer, pressure type, capacity 45 litresBasic functions:Handwheel OpeningComputer-controlled Auto-circle DisinfectionLCD Performance DisplayPressure Safety Chain EquipmentTemperature Adjustment（50-160）Time Adjustment（0-99 hours）Automatic Pressure Discharge 0.145-0.165MpaAfter disinfection, the buzzer rings and the machine will stop automatically.Technical Specifications: Entire Stainless Steel No.34Capacity: 40LElectrical supply: 220VPower: 3.5KWDisinfection Chamber: 350450Weight: 80KGVolume: 60058012507DrumGeneral Description: Drum, specification is similar as D 2- Drum, but need fit to above I 6 autoclave 45L.8Sterilizer, hot airGeneral Description:Sterilizer, hot air, Electric, 5L, 220V, 50/60Hz, 50 -220, outer dimensions 500x170x325mm; inner dimensions 400x160x80mm;Outer case made of stainless steel9Manual Vacuum extractorGeneral Description: Vacuum extractor, Bird, manual, complete set. Technical Specifications: Vacuum extractor, hand-operated pump. Vacuum extractor must be easy to use (to assemble and to clean) and safe. Vacuum extractor can be totally disassembled, is easy to clean, disinfect and sterilize (all parts must be autoclaved at 121C.) All parts must be manufactured from high-strength, long-life materials and require no special maintenance or storage conditions. Vacuum extractor must be in conformity with Council Directive 93/42/EEC on Medical Devices and have CE marking. Supplied with clear instructions / diagrams for use and assembly in English, list of accessories / parts. Set Components: Vacuum extractor is supplied as a complete set in a box with: 3 Bird anterior suction cups complete, stainless steel, 3 different sizes: 40 mm opening diameter. 50 mm opening diameter. 60 mm opening diameter. 2 Soft vacuum extractor cups SILC-CUP complete, 2 different sizes: 50 mm opening diameter. 60 mm opening diameter. 2 Extraction handles, stainless steel. 1 Vacuum pump hand-operated, stainless steel, with valve membrane and o-ring. 1 Silicone plug with 3 holes. 1 Connector angled, chrome plated. 1 Connector angled with screw valve, chrome plated, screw cap and gasket. 1 Vacuum gauge (kPa 0 to -100) with straight connector, chrome plated. 1 Vacuum bottle, plastic. 1 Plastic covered basket, for bottle. 1 Tube, silicone transparent (OD 11 mm ID 6 mm) (L) 150 cm for Bird model. 1 Tube, silicone transparent (OD 11 mm ID 6 mm) (L) 50 cm for pump. Supplied with: 1 x Extra vacuum bottle, plastic 1 x Extra tube silicone transparent (OD 11 mm ID 6 mm) (L) 300 cm. 1 x Extra gasket for the screw valve. 1 x Extra membrane (diam. approx. 8 mm). 5 x Locking rings for the tubing. 10 x Pieces bottom plate of polypropylene for stainless steel cups 40 mm. 10 x Pieces bottom plate of polypropylene for stainless steel cups 50 mm. 10 x Pieces bottom plate of polypropylene for stainless steel cups 60 mm. 1 x Vacuum extractor manual (English). 1 x Silc cups directions for use (English). Vacuum extractor complete set in a box, overall dimensions approx.: 41 (L) x 21 (W) x 29 (H) cm.10RefrigeratorGeneral Description: Refrigerator, Vestfrost refrigerator for vaccine cooling, cabinet shaped, smoked glass door, adjustable wooden shelves, temperature levels between +2/+8, 365 liters capacity, WxHxD: 595x185x595mmPower: 220V, 400W, 50-60Hz11Shadowless lamp 9 bulbs12Examination lightGeneral Description: Mobile examination light, 220 / 12V. Technical Specifications:Same as D5.13GeneratorAir-cooled 4-storke 6.5 Hp/4.8 KW, Petrol engine. Transistorised magneto ignition system, electric(battery not included) or recoil starting system, oil alert. 17ltres petrol tank, gives more 3.6 hours operation. AC output: 230 volt, 50Hz, 6500watt max(5500watt continuously), 28.3amp.14VentilatorVoltage: 220V-220VPower: 552 W- 1052 WOutdoor air: 600m/h - 800m/hThermal Efficiency: 69%Outside Pressure: 120 Pa- 125 PaNoise: 50 dB(A)- 52 dB(A)Net Weight: 40 kg-45 kg15Water distiller apparatusGeneral Description: Water distiller apparatus, Bibby Aquatron water distiller, A4000, able to produce 30 liters of purified water per a hour16Instrument trayGeneral Description: Instrument tray, Stainless steel made, with two doors and castors, cabinet and shelves, four wheeled trolley carrier17Instrument tableGeneral Description: Table, instruments, Mayo types, stainless steel, mobile, adjustable height, tray size: 600x450x20mm, carrying capacity appr. 40kg. Technical Specifications: Table, Myo type, adjustable height.Supports column with solid mechanism to fix upper pole at requested height.Table base on castor designed for under bed or easy positioning of instruments in patient treatment.Heavy base on castor: 4 anti-static swivel wheels.Knockdown construction.Supplied with clear instructions/ diagrams for assembly in 3 languages (English, French and Spanish), list of accessories/ parts and specific tools for assembly.Material:Must be resistant to corrosion (suitable for tropical environment ) and decontamination (chlorine solution).Frame and tray: stainless steel 18/10, bright polish finishing or satin finishing.Dimensions: Mayo table stand, adjustable height: approx. 800 to 1200 (H) mm.Tubes: approx. diam. 30 x 1.5 mm.Swivel castors: diam. Approx. 100 mm.Tray: approx. diam. 600 (L) x 450 (W) x 20 (H) mm.Carrying capacity approx. 40 kg.18Stretcher, wheel/carrying combinationGeneral Description: Stretcher, wheel/carrying combination, Heavy carriage mounted on 4 anti-static swivel wheels, 2 wheels with brakes, stretcher top detachable for transportation filled mattress-pad and cover mattress-pad, 1900(L) x600(W)x800(H) Technical Specifications: Stretcher, wheel and carrying combination, mounted on castors.Heavy carriage mounted on 4 anti-static swivel wheels, 2 wheels with brakes.Stretcher top detachable for transportation.Filled mattress-pad and cover mattress-padUtility shelf, side rails and I.V. stand (recommended).Knockdown construction.Supplied with clear instructions/ diagrams for assembly in 3 languages (English, French and Spanish), list of accessories / parts and specific tools for assembly.Material:Must be resistant to corrosion (suitable for tropical environment ) and decontamination (chlorine solution).Frame: chrome-plated tubular steel, epoxy coated tubular steel, stainless steel.Mattress-pad: foam density approx. 21 25 kg/m3.Cover mattress-pad: resistant waterproof, washable plastic, flame retardant.Dimensions:Stretcher assembled: approx. 1900(L) x 600 (W) x 800 (H) mm.Tubes: approx. diam. 25 x 1.5 mm.Stretcher top and Shelf: approx. 1.5 mm thick.Filled mattress-pad: approx. 30 (H) mm.Carrying capacity: approx. 150 180 kg.19Delivery bedGeneral Description: Bed, labor/delivery, with access. Technical Specifications: 2-section, body section mounted on rubber tips, leg section on swivel castors with brakes, leg section can be completely recessed under body section. Filled PU mattress-pad and cover mattress-pad, 2 sections. Supplied with clear instructions/diagrams for assemble in Chinese, list of accessories/parts and specific tools for assemble.Material:Frame: Chrome-plated tubular steel epoxy coated tubular steel. Stainless steel.Mattress-padding: Foam density approx. 21 - 25 kg / m3.Cover mattress-padding: Resistant waterproof, washable plastic, flame retardant.Dimensions:Body section assembled: Approx. 1000 x 800 x 750 mm (l x w x h).Leg section assembled: Approx. 900 mm (l).Tubes: Approx. diam. 30 x 1.5mmFilled mattress-pad: Approx. 60 (h)mm.Carrying capacity: Approx. 150 - 180 kg.20Ob/Gyn examination bed21Operation table22IV infusion st