实验30lcd12864液晶12864数据手册_W

1、LCD MODULECMF-GG1P0104DTSW-W-EVersion :1.4December 13, 2006TRULY SEMICONDUCTORS LTD.P.22 PRODUCT: LCD MODULE MODEL NO.: CMF-GG1P0104DTSW-W-E SUPPLIER: TRULY SEMICONDUCTORS LTD. DATE: December 13, 2006abcdefabcdefCERT. No. 946535CERT. No. H002005(ISO9001)(ISO14001)SPECIFICATIONRevision: 1.4CMF-GG1P01

2、04DTSW-W-EIf there is no special request from customer, TRULY SEMICONDUCTORS Co., Ltd will not reserve the tooling of the product under the following conditions:1. There is no response from customer in two years after TRULY SEMICONDUCTORS Co., Ltd submit the samples； 2. There is no order in two year

3、s after the latest mass production.And correlated data (include quality record) will be reserved one year more after tooling was discarded.TRULY SEMICONDUCTORS LTD:CUSTOMER:Quality Assurance Department: Approved by:Technical Department: Approved by:REVISION RECORDREV NO.REV DATECONTENTSREMARKS0.1200

4、6-04-28First ReleasePreliminary1.02006-05-08Full specification1.12006-05-26Amend the drawingP.51.22006-07-05Amend backlight characteristics and application circuitP.7,P.8,P.121.32006-07-13Add FPC layoutP.61.42006-12-13Update the part NO.CONTENTSn GENERAL INFORMATIONn EXTERNAL DIMENSIONSn ABSOLUTE MA

5、XIMUM RATINGSn ELECTRICAL CHARACTERISTICSn TIMING OF POWER SUPPLYn BACKLIGHT CHARACTERISTICSn ELECTRO-OPTICAL CHARACTERISTICSn INTERFACE DESCRIPTIONREFERENCE APPLICATION CIRCUITn REFERENCE INITIAL CODEn RELIABILITY TESTn INSPECTION CRITERIONn PRECAUTIONS FOR USING LCD MODULESn PACKING SPECIFICATIONn

6、 PRIOR CONSULT MATTERn FACTORY CONTACT INFORMATIONWRITTEN BYCHECKED BYAPPROVED BYZHOU ZHAO YULIU JIALIN MING CHUANn GENERAL INFORMATIONItemContentsUnitLCD TypeFSTN TRANSMISSIVE/Viewing direction6:00O ClockGlass area (W H)34.50 35.50mm2Viewing area (WH)30.60 24.60mm2Active area (WH)26.85 20.76mm2Numb

7、er of Dots128 64/Dot size (W H)0.18 0.24mm2Dot pitch (W H)0.21 0.27mm2Pixel size (W H)0.18 0.24mm2Pixel pitch (W H)0.21 0.27mm2Driver ICST7565P-G/Backlight TypeLED/Module Power consumption/mwInterface TypeSystem parallel interface/Input voltage2.8V华为 泡棉：TSE4527PM-A(阴影处有粘性）n EXTERNAL DIMENSIONSFPC LA

8、YOUTABSOLUTE MAXIMUM RATINGSParameterSymbolMinMaxUnitSupply voltage for logicVDD0.35.0VInput voltageVIN-0.3VDD + 0.3VOperating temperatureTOP-2070CStorage temperatureTST-3080CELECTRICAL CHARACTERISTICSDC CHARACTERISTICSParameterSymbolMinTypMaxUnitSupply voltage for logicVDD-VSS2.72.82.9VInput Curren

9、tIdd-0.270.39mAOperating voltage for LCDVOP9.810.010.2VInput voltage H levelVIH0.8VDDVDDVDDVInput voltage L levelVIL000.2VDDVOutput voltage H levelVOH0.8VDDVDDVDDVOutput voltage L levelVOL000.2VDDVn TIMING OF POWERSUPPLYPLEASE REFER TO THE DRIVER IC SPECIFICATION.n BACKLIGHT CHARACTERISTICSELECTRO-O

10、PTICAL CHARACTERISTICSItemSymbolConditionMinTypMaxUnitRemarkNoteResponse timeTr=0=0Ta=25 -120-msFIG.32Tf-155-msFIG.32Surface LuminanceLv-cd/m2FIG 4.1Viewing angle rangeq = 903040-degFIG 53 = 2704050-deg = 03040-deg = 1803040-degNote 1. Surface luminance is the center point across the LCD surface 500

11、mm from the surface with all pixels displaying white.For more information see FIG 4.Lv = Average Surface Luminance with all white pixels(P1, P2, P 3,P4, P5)Note 2. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time,

12、Tf). For additional information see FIG 3.Note 3. Viewing angle is the angle at which the contrast ratio is greater than 2. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 5.

13、FIG. 1 Optical Characteristic Measurement Equipment and MethodLight Source Spot Size = 3 mmLight SourceLight Source Spot Size = 3 mmLCD CELLOptical Stage(x,y)Detector FIG. 2 Measuring method for optical characteristics in Reflective modePhoto detectorLight source30LCD panel ( MgO)FIG. 3 The definiti

14、on of Response TimeThe response time is defined as the following figure and shall be measured by switching the input signal for “black” and “white”.% 0whitewhiteblackTrTf1090Optical Response100The values specified are at an approximate distance 500 m m from the LCD surface at a viewing angle of F an

15、d q equal to 0.Measurement condition : Refer to next pages ( B - light source , Halogen Lamp, with polarizer )FIG. 4 Measuring method for Contrast ratio,surface luminance, Luminance uniformity ，CIE (x, y) chromaticityHAABP1P2P5BPP3VA : 5 mm B : 5 mmLight source spot size =2mmH,V : Active AreaActive

16、Areameasurement device is TOPCON luminance meter BM-7FIG. 5 The definition of viewing anglen INTERFACE DESCRIPTIONPin No.SymbolLevelDescription1VSSVSSGround.2LED+-LED, anode.3LED-LED, cathode.4VDD2.8VPower supply.512D0D7H/LData bus.13/CSH/LChip select.14/RESETH/LSystem reset pin.15RSH/LCommand/data

17、select input pin.16/WRH/LWrite execute control pin.17/RDH/LRead execute control pin.18VSSVSSGround.19VSSVSSGround.n APPLICATION CIRCUITn INITIAL CODEPlease consult our technical department for detail information.n RELIABILITY TESTNo.TestItemTest ConditionInspection after test1High Temperature Storag

18、e802/200 hoursInspectionafter 24hours storage atroomtemperature, the sample shall be free from defects:1. Air bubble in the LCD;2. Sealleak; 3.Non-display;4.missing segments; 5.Glass crack; 6.Current Idd is twicehigher than initial value.2Low Temperature Storage-302/200 hours3High OperatingTemperatu

19、re702/120 hours4LowOperatingTemperature-202/120 hours5Temperature Cycle-20 2 2570 2 10cycles(30min.)(5min.)(30min.)6Damp Proof Test50590%RH/120 hours7Vibration TestFrequency：10Hz55Hz10Hz Amplitude：1.5mm,X，Y，Z direction for total 3hours (Packing condition)8Drooping testDrop to the ground from 1m heig

20、ht, one time, every side of carton.(Packing condition)9ESD testVoltage: 8KVR: 330 150pFAir discharge, 10timeC:Remark:1.The test samples should be applied to only one test item. 2.Sample size for each test item is 510pcs.3. For Damp Proof Test, Pure water(Resistance10M) should be used.4. In case of m

21、alfunction defect caused by ESD damage, if it would be recovered to normal state after resetting, it would be judge as a good part.5. EL evaluation should be excepted from reliability test with humidity and temperature: Some defects such as black spot/blemish can happen by natural chemical reaction

22、with humidity and Fluorescence EL has.6. Failure Judgment Criterion: Basic Specification, Electrical Characteristic, Mechanical Characteristic, Optical Characteristic.7. Please use automatic switch menu(or roll menu) testing mode when test operating mode.n INSPECTION CRITERIONTRULYOUTGOING QUALITY S

23、TANDARDPAGE1OF4TITLE:FUNCTIONAL TEST & INSPECTION CRITERIAMDS ProductThis specification is made to be used as the standard acceptance/rejection criteria for Color mobile phone LCM.1 Sample planSampling plan according to GB/T2828.1-2003/ISO 2859-1：1999 and ANSI/ASQC Z1.4-1993, normal level 2 and base

24、d on:Major defect: AQL 0.65 Minor defect: AQL 1.52. Inspection conditionViewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of 2040W light intensity, all directions for inspecting the sample should be within 45against perpendicular line.3. Definition of in

25、spection zone in LCD.AB CZone A: character/Digit areaZone B: viewing area except Zone A (ZoneA+ZoneB=minimum Viewing area) Zone C: Outside viewing area (invisible area after assembly in customers product) Fig.1 Inspection zones in an LCD.Note: As a general rule, visual defects in Zone C are permissi

26、ble, when it is no trouble for quality and assembly of customers product.Item NoItems to be inspectedInspection StandardClassification of defects4.1.1All functional defects1) No display2) Display abnormally3) Missing vertical，horizontal segment4) Short circuit5) Back-light no lighting, flickering an

27、d abnormal lighting.Major4.1.2MissingMissing component4.1.3Outline dimensionOverall outline dimension beyond the drawing is not allowed.2. Zone Size(mm)Acceptable QtyABC0.2IgnoreIgnore0.200.4020.400.6010.60 0TRULYOUTGOING QUALITY STANDARDPAGE2OF4TITLE:FUNCTIONAL TEST & INSPECTION CRITERIAMDS Product

28、4. Inspection standards4.1 Major Defect4.2 Cosmetic DefectItemItems to beInspection Standard NoinspectedFor dark/white spot, sizeis definedClearas = (x + y)Spots2Black and1 white SpotZoneAcceptable QtydefectSize(mm)Pinhole,ABForeignParticle,0.1IgnoreDirt under0.100.152polarizer0.150.2014.2.10.200Dim

29、 Spots2.Circle shaped and dim edged defectsxyCIgnoreClassification of defectsMinorMinor2. Zone Size(mm)Acceptable QtyABC0.2IgnoreIgnore0.200.3020.300.5010.50 0TRULYOUTGOING QUALITY STANDARDPAGE3OF4TITLE: FUNCTIONAL TEST & INSPECTION CRITERIAMDS Product4.2. Cosmetic DefectItemItems to beInspection St

30、andardClassificationNoinspectedof defectsSize(mm)Acceptable QtyLine defectZoneBlack line,L(Length)W(Width)ABCWhite line,4.2.2ForeignIgnoreW0.02IgnoreMinormaterialL3.00.02W0.032underpolarizer,L2.00.03W0.051Ignore0.05WDefine as spot defectIf the Polarizer scratch can be seen after mobile phone cover a

31、ssembling or in the operating condition, judge by the line defect of 4.2.2.If the Polarizer scratch can be seen only in non-operating condition or some special angle, judge by the following.Size(mm)Acceptable Qty4.2.3 PolarizerZoneMinorscratchL(Length)W(Width)ABCIgnoreW0.03Ignore5.0L10.00.03W0.052Ig

32、noreL5.00.05W0.0810.08W0Air bubbles between glass & polarizerPolarize4.2.4 MinorAir bubbleXYZ2.0SDisregardXYZ3.0Inner border line of the sealDisregardTRULYOUTGOING QUALITY STANDARDPAGE4OF4TITLE:FUNCTIONAL TEST & INSPECTION CRITERIAMDS Product4.3. Cosmetic DefectItemItems to beInspection StandardClas

33、sification of Noinspecteddefects(i) Chips on corner MinorNotes: S=contact pad lengthChips on the corner of terminal shall not be allowed to extend into the ITO pad or expose perimeter seal.(ii) Usual surface cracks4.3.5Glass defectMinor(iii) CrackCracks tend to break are not allowed.Major1) Not allo

34、w IC and FPC/heat-seal lead width is more than4.3.6 Parts50% beyond lead pattern.Minor alignment2)Not allow chip or solder component is off center more than50% of the pad outline.According to the 4.3.7 SMTIPC-A-610C class 2 standard. Component missing or function defect are Major defect, the others

35、are Minor defect.n PRECAUTIONS FOR USING LCD MODULESHanding Precautions(1) The display panel is made of glass and polarizer. As glass is fragile. It tends to become or chipped during handling especially on the edges. Please avoid dropping or jarring. Do not subject it to a mechanical shock by droppi

36、ng it or impact.(2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.(3) Do not apply excessive force to the display surface or the adjoining areas since

37、this may cause the color tone to vary. Do not touch the display with bare hands. This will stain the display area and degraded insulation between terminals (some cosmetics are determined to the polarizer).(4) The polarizer covering the display surface of the LCD module is soft and easily scratched.

38、Handle this polarizer carefully. Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass, tweezers, etc.). Do not put or attach anything on the display area to avoid leaving marks on. Condensation on the surface and contact with terminals due to cold will

39、damage, stain or dirty the polarizer. After products are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air.(5) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is he

40、avily contaminated, moisten cloth with one of the following solvents- Isopropyl alcohol- Ethyl alcoholDo not scrub hard to avoid damaging the display surface.(6) Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.- Water- Ketone- Aromatic solvent

41、sWipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color fading. Avoid contacting oil and fats.(7) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensatio

42、n or a current flow in a high-humidity environment.(8) Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.(9) Do not attempt to dis

43、assemble or process the LCD module.(10) NC terminal should be open. Do not connect anything.(11) If the logic circuit power is off, do not apply the input signals.(12) Electro-Static Discharge Control，Since this module uses a CMOS LSI, the same careful attention should be paid to electrostatic disch

44、arge as for an ordinary CMOS IC. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.- Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body have the same electric potential .Be sure to gr

45、ound the body when handling the LCD modules.- Tools required for assembling, such as soldering irons, must be properly grounded. make certain the AC power source for the soldering iron does not leak. When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality t

46、o minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor.- To reduce the amount of static electricity generated, do not conduct assembling and other work under dry conditions. To reduce the generation of static electricity be ca

47、reful that the air in the work is not too dried. A relative humidity of 50%-60% is recommended .As far as possible make the electric potential of your work clothes and that of the work bench the ground potential- The LCD module is coated with a film to protect the display surface. Exercise care when

48、 peeling off this protective film since static electricity may be generated（13） Since LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the module or making any alterations or modifications to it.- Do not alter, modify or change the shape of the

49、tab on the metal frame.- Do not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached.- Do not damage or modify the pattern writing on the printed circuit board.- Absolutely do not modify the zebra rubber strip (conductive rubber) or hea

50、t seal connector.- Except for soldering the interface, do not make any alterations or modifications with a soldering iron.- Do not drop, bend or twist LCM.Storage PrecautionsWhen storing the LCD modules, the following precaution is necessary.(1) Store them in a sealed polyethylene bag. If properly s

51、ealed, there is no need for the dessicant.(2) Store them in a dark place. Do not expose to sunlight or fluorescent light, keep the temperature between 0C and 35C.(3) The polarizer surface should not come in contact with any other objects. (We advise you to store them in the container in which they were shipped).OthersLiquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generate