ErP符合性评估表

1、ErP 符合性评估表评估日期Evaluation date: XXXXXXXX评估单位Evaluation department: XXX评估人员Assessors: 机种名称Model: XXX商标trademark:XXX符合;不符合符合;不符合备注: 目前暂不含产品的生态设计评估(BS EN62075:2008).Note:theecologicaldesignassessmentofproductsisnotincludedatpresent(BSen62075:2008)评估细节如下Details of the assessment are as follows:-(EC)No.27

2、8/20091.Ecologicaldesignrequirementsexternal power supply - (EC) No. 278 / 2009)项评估结果Evaluation results:备注remarks:.1.2供货商是否有提供ErP测试报告the supplier provide ERP test report.Yes; No1.3(EC) No. 278/2009 外部电源供应器的生态化设计要求(EC) No. 278 / 2009 ecological design requirements for external power supply12010.04.25

3、) The first stage: one year after implementation measures came into effect (i.e. April 25, 2010)1.1第一阶段;1.1第一阶段;第二阶段.Model 机型Factory AC input工厂名voltage交流输入电压AC inputFrequency 交流输入电流Power ConsumptionNo-load(XX%)效率Result结果Adapter 铭牌:No load:0.50W平均动态效率:Average active efficiency: 0.50*Po, for Po51.0W22

4、011.04.25) The second stage: two years after implementation measures came into effect (i.e. April 25, 2011)空载功率要求No load power requirement.输出功率output powerPo51.0W Po51.0WAC-AC external power supplies except low voltage external power supplies(外部电源供应器,低电压外部电源供应器除外)0.5W0.5WAC-DC external power supplie

5、s except low voltage external power 0.3W0.5WLow voltage external power supplies (低电压外部电源供应器)0.3Wn/a平均动态效率-average active efficiency输出功率output powerAC-AC and AC-SC external power Low voltage external power supplies, Except low voltagesupplies (低电压外部电源供应器) external power supplies(AC-AC和AC-DCPo1.0W 1.0

6、W51.0W0.480*Po+0.1400.063*In(Po)+0.6220.8700.497*Po+0.0670.075*In(Po)+0.5610.860Note: “low voltage external power supply “means an external power supply with a nameplate output voltage of less than 6 volts and a nameplate output current greater than or equal to 550 milliamperes注：“低电压外部电源”是指外部电源输出电压与

7、铭牌低于 6 伏特和铭牌输出电流大于或等于550 毫安产品的offmodelandstandbymodel 需要符合-(EC)no1275/2008;BSEN62087:2003Directive 2005/32/ec评估结果Assessment remarks:符;不符合Model 机型AC input voltage AC input交流输入电压Frequency交流输入电流AC inputpower 交流输入电源Applianceoperating mode 操作模式Model 机型AC input voltage AC input交流输入电压Frequency交流输入电流AC inpu

8、tpower 交流输入电源Applianceoperating mode 操作模式OffstandbyResult结果Remark 备注 :Ambient Temp 环境温度: 28CThe measurement method used 使用的测量方法: EN62087:2003Total harmonic distortion of the electricity supply system供电系统总谐波失真: 5%Total harmonic distortion of the electricity supply system供电系统总谐波失真: 5%Thefluctuationoft

9、hePowersupplyvoltageduringthetestsThefluctuationofthepowersupplyfrequencyduringthetests产品的off model and standby modelActual test data of consumption of off model and standby 。第一阶段,是否1.00W ? 第二阶段,是否0.50W ?Yes;NoYes;No-(EC)No 1275/2008Energy consumption for standby shutdown of electrical appliances -

10、(EC) no 1275 / 2008 ecological design requirements.1The first stage: year after the implementation measures came into effect (from January 6, 2010)4Thesecondstage:years after the implementation measures came into effect (from January 6, 2013)关机模式Off Mode待机模式standby mode功耗 power dissipation 1.00W任何情况

11、下,响应功能或指示响应功能之功耗不超过 1.00Windication response function shall not exceed 1.00wInanycase,thepowerconsumptionof information display function or total power consumption of information display and response function shall not exceed 2.00w功耗 power dissipation 0.50W任何情况下,响应功能或指示响应功能之功耗不超过 0.50W任何情况下,信息显示功能的功

12、耗或信息显示和响应功能的总功耗不超过 1.00W In any case, the power consumption of response function or indication response function shall not exceed 0.50WIn any case, the power consumption information display function or the total power consumption of information display and response function shall not exceed 1.00w关机或

13、待机模式之有效性Validity of power off or standby mode电源管理功能Power management function当产品连接电源产品应提供有效的同第一阶段Same as the first 关机模式/或待机模式或其它符合功能要求的模式. When the product is connected to the power supply, the product shall provide effective shutdown mode and / or standby mode or other modes that meet the functional

14、 requirements不要求Not required当产品不提供其主要功能,产品须提电源管理的功,以在可能最短时间, 自动切成关机模式或待机模式或其它符合功耗要求的模.在被运输前, 产品的电源管理功能须被激活. When the product does notprovide its main functions,provide its main functions, theproduct must provide the power management function to automatically switchintotheshutdownmode,standby mode or other modes meeting the consumption requirements in theshortest possi