年海格电气智能家居TEBIS新产品培训ppt课件

1、Hager 2021新产品培训10.07.20222新产品培训.10.07.20223本次新产品清单系统附件TYF130线路耦合器输出设备TYB601A开关模块、1路、4A，表面安装TYB602A开关模块、2路、4A，表面安装TYB621C窗帘模块、1路、6A，表面安装TYA661A通用调光器、单路、300WTYA661B通用调光器、单路、600WTYA663A通用调光器、三路、300WTYA604A开关驱动器、四路、4ATYA604B开关驱动器、四路、10ATYA604C开关驱动器、四路、16ATYA604D开关驱动器、四路、16A、适于容性负载，200FTYA606A开关驱动器、六路、4A

2、TYA606B开关驱动器、六路、10ATYA606C开关驱动器、六路、16ATYA606D开关驱动器、六路、16A、适于容性负载、200FTYA606E开关驱动器、六路、16A、带电流检测TYA608A开关驱动器、八路、4ATYA608B开关驱动器、八路、10ATYA608C开关驱动器、八路、16ATYA608D开关驱动器、八路、16A、适于容性负载、200FTYA610A开关驱动器、十路、4ATYA610B开关驱动器、十路、10ATYA610C开关驱动器、十路、16ATYA610D开关驱动器、十路、16A、适于容性负载、200FTYA624A四路卷帘驱动器、230 VACTYA624B四路卷

3、帘驱动器、24 VDCTYA624C四路百叶窗驱动器、230 VACTYA624D四路百叶窗驱动器、24 VDCTYA628A八路卷帘驱动器、230 VACTYA628C八路百叶窗驱动器、230VDC.新品概览有哪些更新Whats New?产品系列形状自检缺点上传优先级控制程序恢复LED指示电流检测调光识别新手动方式新逻辑功能新场景功能窗帘反响.电流检测10.07.2022Castor Sun - New Generation Step 1用户：我能从可视化软件上更清楚地了解我想要知道的信息了工程单位：软件反响的信息更加可靠，可以用来做更多运用。电流检测精度更高：到达2 TYA606E.电流检

4、测10.07.2022Castor Sun - New Generation Step 1设备当前运行状态显示可设定警报电流阀值可设定峰值报警可设定电流中断报警（中断超过6小时）当前电流值测量漏电检测.调光识别10.07.2022Castor Sun - New Generation Step 1可以自动检测运用的是什么类型的灯具，调理调光曲线，同时加强了LED、CFL灯的调光。且对LED、CFL灯进展调光时，无需再外加电子整流器.形状自检、缺点上传开关10.07.2022Castor Sun - New Generation Step 1及时地了解 模块的形状 防患于未然超越额定电流缺点触点

5、动作过于频繁继电器触点动作缺点.10.07.2022Castor Sun - New Generation Step 1效力器KNX过载报警过热报警短路报警过压报警可以更即时地了解模块的形状，从而更快更准确地处理问题形状自检、缺点上传调光.手动方式10.07.2022Castor Sun - New Generation Step 1改良后的手动方式将带形状反响，同时手动方式将可以被控制，防止了手动方式下远程无法控制的情况。从此不再被束缚。.优先级控制10.07.2022Castor Sun - New Generation Step 1超级警报手动方式报警优先锁定传统控制可以实现多种控制手段

6、的优先级别，控制更明晰，控制信息将按照新的优先级别执行。.新逻辑功能10.07.2022Castor Sun - New Generation Step 1新的模块将具有更强的逻辑功能，可以独立完成常见逻辑控制需求，无需另外配置逻辑模块，节约造价，提高可靠性。因此，原先很多需求用逻辑模块才干完成的任务如今可以轻松地满足客户的需求。 - 每个逻辑最多4个输入 - 最多2个逻辑输出 - 逻辑输出结果可设定 - 并不直接关联与相对应的输出.程序恢复10.07.2022Castor Sun - New Generation Step 1新的模块可以设定程序记忆点，在程序被修正后，可以恢复之前存储的时间

7、点时的程序设定。.场景功能10.07.2022Castor Sun - New Generation Step 1新的模块中，场景的参数设置有了更多的选择，特别是1-bit Scene调用数量添加到4个，极大地方便了编程和场景设定，从而完成更加复杂的设计。.LED指示10.07.2022Castor Sun - New Generation Step 1新模块的LED指示灯的变化也有了更多的选择。可经过ets自在定义运转规那么，可在手动方式下发送形状反响。.窗帘反响10.07.2022Castor Sun - New Generation Step 1可经过反响获知窗帘位置形状，而不只是能否在

8、运转。可选择到顶或究竟反响设定，如到顶部反响发1。.10.07.202217新产品详解.10.07.202218功能块Super alarm超级警报Manual mode手动方式Alarms警报Priority优先级Lock-up锁定Basic controls根底控制Shutter / Blind窗帘/百叶Manual mode手动方式Priority优先级Lock-up锁定Basic controls根底控制ON/OFF / Dimming / Current monitoring开关/调光/电流检测.10.07.202219开关输出模块：参数详解1Output contact type

9、: Normally closed, normally openTimer function activation: Not used, usedTimer operation : ON, OFF, BlinkingTimer/toggle change-over activation: Enabled, DisabledTimer duration modifiable through object “Timer duration: Enabled, DisabledTimer duration : h, min, sTripping delay: Disabled, h, min, sSw

10、itching delay: Disabled, h, min, sCut-OFF pre-warning: Disabled, h, min, sTimer interruption : Interruptible timer, Non-interruptible timerTimer retriggerable : Yes, NoTimer duration extension: No limitation, 1 to 5 time duration extensionTime limited toggle switch activation: Enabled, DisabledTime

11、limited toggle switch duration: h, min, sBlinking “ON duration: h, min, sBlinking “OFF duration: h, min, sOutput status emitted during Blinking function: ON, OFF, ON/OFFOperating hours counter activation: Enabled, DisabledRelay status for operating hours counter: Normally closed, normally openOperat

12、ing hours counter direction: Incremental counter, decremental counterOperating hours counter set point value: 1 65535 hOperating hours counter set point value modifiable through “Operating hours counter set-point object:Enabled, DisabledEmission of the “Operating hours counter value object: Not used

13、, periodicallyTime for periodical emission of the “Operating hours counter value object: h, min, sBasic functionsON/OFFTimerTimer / Toggle change-overTime limited toggle switchTimer durationHours counter valueHours counter setpointReset hours counterHours counter setpoint reachedSceneRestore scene.1

14、0.07.202220开关输出模块：参数详解2Preset function activation: Disabled, Preset 1-Level, Preset 2-LevelActivation of Preset authorization objects: Yes, NoPolarity of Preset 1/2 authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorizedOutput status if preset 1/2 object X = 1: Un

15、changed, Invert status, ON, OFF, Scene X, Blinking, Status before Preset object =0Output status if preset 1/2 object X = 0: Invert status, ON, OFF, Scene X, Blinking Status before Preset object =1Activation of Scene function: Enabled, Disabled Number of scenes displayed: 8, 16, 24, 32, 64Status for

16、scene X : ON, OFF, Blinking, not concernedScene memorisation by long press on ambient push button: Enabled, DisabledScene memorisation acknowledgment: Enabled, DisabledRestore ETS-parameters settings object activation: Enabled, DisabledOverwrite of Scene, timer and operating hours counter value at n

17、ext download: Enabled, DisabledStatus ON/OFF activation: Enabled, DisabledPolarity of Status object ON/OFF: 0 = OFF ; 1 = ON, 0 = ON ; 1 = OFFEmission of Status object ON/OFF: On change, Periodically, On change and periodicallyTime for periodical emission of the Status object ON/OFF: h, min, sEmissi

18、on of Status object during manual mode : Enabled, DisabledTime delay for emission of “ON/OFF Status objects after bus power cut: h, min, sOutput status during bus power cut: Unchanged, ON, OFFOutput status at bus power return: Unchanged, ON, OFFStatus during and after ETS download: Unchanged, ON, OF

19、FDiagnosis object activation: Not used, usedEmission of Diagnosis object: On change, Periodically, On change and periodicallyTime for periodical emission of the Diagnopsis object: h, min, sBasic functionsPreset 1Preset 2Autorisation Preset 1Autorisation Preset 2Output statusSceneRestore sceneDiagnos

20、is.10.07.202221调光模块：参数详解1Relative dimming speed: h, min, sSwitch ON speed: h, min, sCut OFF speed: h, min, sBrightness value at switch ON: 0100 %, 101% = Last valueMinimum dimming value: 150%Maximum dimming value: 51100%Timer function activation: Not used, usedTimer operation : Value %, BlinkingTime

21、r/toggle change-over activation: Not used, usedTimer duration modifiable through object “Timer duration: Enabled, DisabledTimer duration : h, min, sTripping delay: Disabled, h, min, sSwitching delay: Disabled, h, min, sCut-OFF pre-warning: Disabled, h, min, sCut-OFF pre-warning duration: h, min, sTi

22、mer interruption : Interruptible timer, Non-interruptible timerTimer retriggerable : Yes, NoTimer duration extension: No limitation, 1 to 5 time duration extension Time limited toggle switch activation: Enabled, DisabledTime limited toggle switch duration: h, min, sOperating hours counter activation

23、: Enabled, DisabledRelay status for operating hours counter: Normally closed, normally openOperating hours counter direction: Incremental counter, decremental counterOperating hours counter set point value: 1 65535 hOperating hours counter set point value modifiable through “Operating hours counter

24、set-point object:Enabled, DisabledEmission of the “Operating hours counter value object: Not used, periodicallyTime for periodical emission of the “Operating hours counter value object: h, min, sBasic functionsON/OFFTimerTimer / Toggle change-overTime limited toggle switchTimer durationHours counter

25、 valueHours counter setpointReset hours counterHours counter setpoint reachedSceneRestore sceneDimmingBrightness value %.10.07.202222调光模块：参数详解2Duration of brightness value 1 during blinking function: h, min, sBrightness value 1 during blinking function : 0100 %, 101% = Last valueDimming speed for Br

26、ightness value 1 during blinking function: 0100 %, 101% = Last valueDuration of brightness value 2 during blinking function: h, min, sBrightness value 2 during blinking function : 0100 %, 101% = Last valueDimming speed for Brightness value 2 during blinking function: 0100 %, 101% = Last valueOutput

27、status emitted during Blinking function: ON, OFF, ON/OFFPreset function activation: Disabled, Preset 1-Level, Preset 2-LevelActivation of Preset authorization objects: Yes, NoPolarity of Preset 1/2 authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorizedOutput stat

28、us if preset object 1/2 = 1: Unchanged, Invert status, Value %, Scene X, Blinking, Status before Preset object =0Output status if preset object 1/2 = 0:Unchanged, Invert status, Value %, Scene X, Blinking, Status before Preset object =1Activation of Scene function: Enabled, Disabled Number of scenes

29、 displayed: 8, 16, 24, 32, 64Status for Scene X : Value %, Blinking, Not concernedBrightness value for scene X: 0100 %, 101% = Last valueDimming speed for scene X: h, min, sScene memorization by long press on ambient push button: Enabled, DisabledScene memorisation acknowledgment: Enabled, DisabledR

30、estore ETS-parameters settings object activation: Enabled, DisabledOverwrite of Scene, timer and operating hours counter value at next download: Enabled, DisabledSwitching ON by long press: Enabled, DisabledSwitching OFF by long press: Enabled, DisabledBasic functionsPreset 1Preset 2Autorisation Pre

31、set 1Autorisation Preset 2SceneRestore scene.10.07.202223调光模块：参数详解3Status ON/OFF activation: Enabled, DisabledPolarity of Status object ON/OFF: 0 = OFF ; 1 = ON, 0 = ON ; 1 = OFFEmission of Status object ON/OFF: On change, Periodically, On change and periodicallyTime for periodical emission of the S

32、tatus object ON/OFF: h, min, sEmission of Status object during manual mode : Enabled, DisabledTime delay for emission of “ON/OFF Status objects after bus power cut: h, min, sBrightness value indication activation : Enabled, DisabledEmission of Brightness value indication object: On change, Periodica

33、lly, On change and periodicallyTime for periodical emission of the of Brightness value indication object: h, min, sEmission of of Brightness value indication object during manual mode : Enabled, DisabledTime delay for emission of Brightness value indication object after bus power cut: h, min, sBrigh

34、tness value during bus power cut: Unchanged, 0100 %, 101% = Last valueBrightness value at bus power return: Unchanged, 0100 %, 101% = Last valueBrightness value during and after ETS download: Unchanged, 0100 %, 101% = Last valueMaintenance object activation: Not used, usedEmission of Maintenance obj

35、ect: On change, Periodically, On change and periodicallyTime for periodical emission of the Maintenance object: h, min, sLoad type function activation: Enabled, DisabledLoad type detection function: Automatic, CFL, LED, Inductive loads, Energy saving loadLoad type object activation: Enabled, Disable

36、dLoad type detection problem object emission on the bus: Enabled, DisabledOverload indication object activation: Enabled, DisabledOvervoltage indication object activation: Enabled, DisabledShort circuit indication object activation: Not used, usedOver-temperature indication object activation: Not us

37、ed, usedLoad default indication object activation: Not used, usedBasic functionsBrightness value %Output status ON/OFFLoad typeStart load type detection processLoad type detection problemOverloadShort circuitOver temperatureLoad defaultDiagnosisOvervoltage.10.07.202224窗帘模块：参数详解1Closing type: Shutter

38、, shutter and blindComplete Up movement duration: h, min, sComplete Down movement duration: h, min, sTime delay for direction inversion: Sec, MillisecondsSecured down function: Not used, UsedRelay closing time for slat positioning: s, msTotal number of slat angles: 1 50Preset function activation: Di

39、sabled, Preset 1-Level, Preset 2-LevelActivation of Preset authorization objects: Yes, NoPolarity of Preset 1/2 authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorizedPosition if preset object 1/2 = 1: Unchanged, Stop, UP, Down, specific position, Scene X, Activat

40、e sun protection, Deactivate sun protection, Status before Preset object =0Output status if preset object 1/2 = 0: Unchanged, Stop, UP, Down, specific position, Scene X, Activate sun protection, Deactivate sun protection, Status before Preset object =1Activation of Scene function: Enabled, DisabledN

41、umber of scenes displayed: 8, 16, 24, 32, 64Position for Scene X : Up, Down, Specific position, Not concerned Specific Position for Scene X: 0100 %Slat angle for Scene X: 0100 %Scene memorization by long press on ambient push button: Enabled, DisabledScene memorisation acknowledgment: Enabled, Disab

42、ledRestore ETS-parameters settings object activation: Enabled, DisabledOverwrite of Scene at next download: Enabled, DisabledActivation of Diagnosis object: Enabled, DisabledEmission of Diagnosis object: On change, Periodically, On change and periodicallyTime for periodical emission of the Diagnosis

43、 object: h, min, sStatus indication activation: Enabled, DisabledObject Position / Slat angle indication %: Enabled, DisabledEmission of objects position / slat angle indication in %: On change, Periodically, On change and periodicallyTime for periodical emission of the objects position / slat angle

44、 indication in % objects : h, min, sBasic functionsUP/DOWNStep/StopPosition in %Slat angle in %Preset 2SceneRestore scenePreset 1Author. Preset 1Author. Preset 2Position in %Slat angle in %Diagnosis.10.07.202225窗帘模块：参数详解2Object Status Upper/Lower position indication: Enabled, DisabledPolarity of Sta

45、tus objects Upper and Lower position indication: 0 = Upper/lower position reached ; 1 = Upper/lower position not reached 0 = Upper position not reached ; 1 = Upper position reachedEmission of objects Upper/lower position indication: On change, Periodically, On change and periodicallyTime for periodi

46、cal emission of the objects Upper/lower position indication objects: h, min, sPosition during bus failure: Unchanged, UP, DownStatus at bus power return: Unchanged, UP, Down, Specific position, Scene XStatus during download: Unchanged, UP, DownStatus after download: Unchanged, UP, Down, Specific pos

47、ition, Scene XEmission of Status objects during manual mode: Enabled, DisabledActivation of sun protection function: Disabled, Enabled with only position object, Enabled with only Slat angle object, Enabled with Position and slat angle objectsSun protection deactivated after local control: Enabled,

48、DisabledControl(s) allowed deactivating sun protection: Up/down control, Step/stop control, Up/down and Step/stop controls, All basic function controls.Sun protection deactivation type: Permanent, time limitedDuration of sun protection deactivation: h, min, sActivation of sun protection authorizatio

49、n object: Enabled, DisabledPolarity of the sun protection authorization object: 0 = not authorized; 1 = authorized 0 = authorized; 1 = not authorizedActivation of sun protection status object: Enabled, DisabledPolarity of sun protection status object: “0 = Sun protection function deactivated, “1 = S

50、un protection function activated “0 = Sun protection function activated, “1 = Sun protection function deactivatedEmission of Sun protection status object: On change, Periodically, On change and periodicallyTime for periodical emission of the “Sun protection status object: h, min, sStatus at the end

51、of sun protection: Unchanged, UP, Down, Specific position, Scene X, Position before Sun protection, Theoretical position after Sun protectionBasic functionsSun protectionPosition in %Sun protectionSlat angle in %Sun protectionauthorizationSun protectionreactivationSun protection statusLower position

52、 reachedUpper position reached.10.07.202226课堂练习题1、复习编程根底，完成简单的调光、开关的场景功能2、强化开关的各项功能，例如on/off object timing，switching delay tripping delay 及timer/toggle switching changeover ，limited toggle switching等2、复习Scene 1-bit功能，以及对应的新称号Preset3、熟习Group Monitor/Bus Monitor的操作，可以熟练读取Monitor中显示的数据。4、熟习经过Write Valu

53、e给相印的组地址赋值。5、调光 load default功能测试。6、测试不同种类的光源在与调光器衔接时的调光效果，经过手动切换调光类型察看有什么变化，衔接功率扩展模块测试调光效果.10.07.202227课堂练习题1、完成以下场景，按键1为场景1，按键2为场景2经过Preset功能一键按键3控制场景1和场景2的切换2、经过Scene memorisation 功能，使场景1变为3、经过Restore scene功能恢复原先的场景1功能4、 经过Group Monitor/Bus Monitor察看部分“人为缺点报警、窗帘到顶究竟反响例如：总线掉线缺点、负载缺点等。Output1Output2

54、Output3Output4Dim Output1场景1开关开开100%场景2开关关开40%场景1关关开开10%.10.07.202228优先级次序Super alarmManual modeAlarmsPriorityLock-upBasic controlsShutter/Blind窗帘/百叶.10.07.202229优先级次序Manual modePriorityLock-upBasic controlsOn/Off, Dimmer & Current Monitoring 开关/调光/电流检测.10.07.202230超级警报：参数详解Activation of Super alarm

55、 function: Enabled, disabledSuper alarm type : Permanent, time limitedDuration of Super alarm function: h, min, sPosition during Super alarm function: Unchanged, UP, Down, Stop, Scene X, specific positionPosition after Super alarm function: Unchanged, UP, Down, specific position Position before supe

56、r alarm function, Theoretical position after super alarm functionActivation of Super alarm status object: Enabled, DisabledPolarity of Super alarm status object: 0 = Manual mode deactivated; 1 = manual mode activated 0 = Manual mode activated; 1 = manual mode deactivatedEmission of Super alarm statu

57、s object: On change, Periodically, On change and periodicallyTime for periodical emission of Super alarm status object: h, min, sActivation Super alarm monitoring period: Enabled, disabledSuper alarm monitoring period duration: h, min, sSuper alarmSuper alarm Super alarm status运用场所:只存在于窗帘/百叶模块制止其他一切

58、的命令动作例如运用于大楼外墙清洁.10.07.202231手动方式：参数详解Activation of manual mode: Manual mode enabled Manual mode disabled Manual mode time limitedDuration of time limited manual mode: h, min, sManual mode is enabled for output X: Yes, NoActivation of Manual mode disabling object: Enabled, DisabledPolarity of Manual

59、 mode disabling object: 0 = enabled, 1 = disabled 0 = disabled, 1 = enabledActivation of Manual mode status object: Enabled, DisabledPolarity of Manual mode status object: 0 = Manual mode deactivated; 1 = manual mode activated 0 = Manual mode activated; 1 = manual mode deactivatedEmission of the “Ma

60、nual mode status object: On change, Periodically, On change and periodicallyTime for periodical emission of the “Manual mode status object: H, Min, SecPosition after manual mode : Unchanged, Up, Down, Scene X, Specific position, Position before manual, Mode, Theoretical position after manual mode Un