设计技术协议

1、建设工程设计技术协议Construction Project Design Technical Agreement（专业建设工程技术协议）（Profession Construction Project Technical Agreement）工程名称：尼日利亚 BPP 发电工程Project Name: Nigeria BPP Generation Engineering工程地点：尼日利亚Project Location: Nigeria合同编号：Contract No.: 发包人： Employer (Party A): 承包单位： Design Firm (Party B): 签订日期：

2、 Signed on: 5中华人民共和国建设部 监制国家工商行政管理局Supervise and Manufactured by Ministry of Construction of Peoples Republic of China and the State Administration of industry and Commerce发包人： Employer (Party A): 设计人： Design Firm (Party B): 发包人托付设计人担当尼日利亚BPP发电工程设计任务，工程地点为尼日利亚 ,经双方协商一样，签订本合同，共同执行。Client (Party A) en

3、trusts Xian Datang Electric Power Design Research Institute Najing to undertake the design for Nigeria BPP Generation Engineering ，Project Location is Nigeria.This Contract is made by the two parties after their mutual agreement. 第一条 本合同签订依据Article 1. This Contract is signed in accordance with:1.1 中

4、华人民共和国合同法、中华人民共和国建筑法和建设工程勘察设计市场管理规定。1.1 The Contract Law of the Peoples Republic of China,The building regulations of the Peoples Republic of ChinaandThe developmental Law of the Peoples Republic of China.1.2 国家及地方有关建设工程勘察设计管理法规和规章。1.2 Laws and regulations of the related state and local construction

5、 survey and design management.1.3 建设工程批准文件。1.3 Documents of Approval for Construction 其次条 设计依据Article 2. Design Basis2.1 发包人给设计人的托付书2.1 The Trust Deed of the tender accepted provided to the designer by the employer.2.2 发包人提交的基础资料2.2 Fundamental materials submitted by the employer.设计人采纳的主要技术标准是：中华人民共

6、和国设计规范、规定和规程.The major technical standards adopted by the designer are: Laws and regulations of the Peoples Republic of China.第三条 合同文件的优先次序Article 3. Priority of Contract Document构成本合同的文件可视为是能相互说明的，假如合同文件存在歧义或不一样，则依据如下优先次序来推断： The documents consisting of this Contract may be deemed as demonstrating

7、mutually; if there is any ambiguity or discordance in the contract document , the following priority shall be followed to judgment.3.1 合同书3.1 The Contract3.2 发包人要求及托付书3.2 Requirement of the employer and Letter of Authority第四条 本合同项目的名称、规模、阶段及设计内容（依据行业待点填写）：名称：尼日利亚BPP发电工程Article 4. Name, Scale, Phase,

8、 Investment and design Content for the Contract Item (fill in based on industry characteristics)规模：3台 MS9001E燃气轮发电机组+3台余热锅炉+3台60Mw汽轮发电机组联合循环发电系统Scale:3x126MW MS9001E gas turbine generating unit + 3x60MW HRSG + 3x60MW turbo-generation unit combined cycle power system阶段：概念设计、初步设计及施工图设计 Phase: concept

9、design, preliminary design and detailed design设计内容:design content1、热力系统：电站内主蒸汽系统、主给水系统、抽、排汽系统、补给水系统及工业冷却水系统。1, Thermodynamic system Main steam system, Main FW system, Extraction steam, Dump steam system, Make-up water system, Industry cooling water system.2、海水淡化处理系统和化学水处理系统淡化海水经化学水处理系统处理后供应除盐水送至电厂余热

10、锅炉和生活用水。2, Sea water desalination system and chemical water treatment systemDesalination of seawater shall be treated by the chemical water treatment system for the HRSG and living water.3、海水循环冷却水系统3, Seawater Circulation cooling water system4、自然气燃料输送系统：自然气燃料经输送系统至MS9001E燃气轮机入口。4, Gas fuel conveying

11、 systemGas fuel shall be transported by Gas fuel conveying system to the entrance of MS9001E gas turbine.5、电气系统电气主接线系统及330Kv升压站系统，出线开关柜出线端以内的全部电气部分，接入系统由甲方负责。5, Electrical system Design Content : The main electrical system and Booster station, Electrical part within the outlet side of outlet switch

12、cabinet.Responsibilities of Client : switch in system6、限制系统上述范围内的全部DCS限制系统。6. Control systemDCS Control system above the range.7、建筑结构部分厂房建筑结构；管网支架； 设计包含本项目电厂内整个厂区的有关设计,包括消防、采暖通风、照明及厂内通讯等，设计人供应全部的设备清册、材料清册、安装图、施工图等。7, Building structural partsBuilding structural, piping support; Help Haiyi company co

13、mplete the base of structure design.The design include the whole area of the power station in this project, fire control, heating ventilation, lighting, communication. The designer supply the all of the equipment list, material list, installation diagram, construction drawing an so on.第五条 发包人和设计人相互提

14、交的有关资料、文件刚好间：Article 5. Relevant materials, documents and time submitted to the designer by the employer.第1阶段：概念设计1、 合同签订时，发包人即供应自然气元素分析资料、海水水质资料，电站当地气象资料和当地震烈度资料；燃气轮发电机组及余热锅炉资料。2、合同生效和收到上述有效资料后45天内设计人供应概念设计文件：1）初步概念GA图（PDF格式）2）3D渲染的图像（五个视图，PDF格式）3）3D动画解说（长达一分钟）4）概述功能规格说明书5）粗略订购成本，建立和组件预算细目第2阶段：修改概念

15、设计的内容初步概念设计审查后, 修改概念设计的内容提给NAMCO。须要调整和修正内容需经有关部门审定。第3阶段：完成驳船及驳船电厂的基本设计 成果：规范2）GA图3）救生设备支配4）消防限制支配5）结构防火爱护支配6）支配的导航灯7）容量规划8）中端船舶部分9）简介甲板支配10）外壳制造11）典型的横剖面12）横向和纵向舱壁13）前最终结构14）尾部结构15）装载坡道或其他支配16）燃油系统图17）舱底水系统图18）压舱系统图19）淡水系统图20）电气系统单线图21）电力负荷平衡22）微调和稳定性23）空塔空间计算24）吨位计算第4阶段：招标船厂合作协调的补充基础+安装 Stage 1:The

16、 concept design1. When the contract signed, the employer must supply the analysis data of natural gas, water quality data of sea water, local weather data of power plant, local earthquake data, MS9001E gas turbine generating unit data and HRSG data.2. After contract become effective and receive the

17、availability data above in 45 days, the designer supply the concept design.Draught concept GA drawing (PDF format)3D rendered images (up to five views PDF format)3D walkthrough / fly around (up to one minute)Outline functional specificationRough order of magnitude cost to build and component budget

18、breakdownStage 2:Any amendments needed to the concept can take place after the initial presentation to NAMCO . there will need to be some tweaks and revisions following the statutory authorities and reaction I am sure. Amendments to concept.Stage 3: Basic design of barge power vessel (this stage sha

19、ll be completed with HaiYi company)Deliverables:specificationGA drawingLife saving appliance planFire control plan Structural fire protection planArrangement of navigation lightsCapacity planMid ship sectionProfile & deck planShell fabricationTypical transverse sectionsTransverse &longitudin

20、al bulkheadsFore end structureAft end structureEmbarkation ramp or other arrangementFuel system diagramBilge system diagramBallast system diagramFresh water system diagramElectrical single line diagramElectrical load balanceTrim & stabilityFreeboard calculationTonnage calculationStage 4 Suppleme

21、ntary fee for tendering to shipyards and co coordination builds and installation.第六条 设计人向发包人交付的设计文件、份数、地点刚好间：方案设计文件： 份(中英文) (PDF版)交图地点： 南京交图时间： 按第五条规定Article 6 Documents, number of copies, location and time submitted to the employer by the designer:Design documents: 8 copies (in Chinese and English

22、)Submission Location: NajingSubmission Time: Accoding to Article 5第七条 费用 双方商定，本协议的设计费为： 万元（含审图费）。 Article 7.Expenditure It is agreed between both parties that the design fee under this contract is RMB(include checking drawing fee)第八条 支付方式第1阶段：概念设计完成后，支付预算费用： 万元。第2阶段：初步概念设计审查通过后，支付预算费用： 万元。第3阶段：完成驳船及

23、驳船电厂的基本设计：支付预算费用： 万元第4阶段：: 完成招标船厂合作协调的补充基础+安装：支付预算费用： ， 万元Article 8.Form of paymentStage 1: Concept Design, budget fees:10%, sum is RMBStage 2: Amendments to concept, budget fees:5%, sum Is RMBStage 3: Basic design of barge power vessel, budget fees:50%, sum is RMBStage 4: Supplementary fee for tend

24、ering to shipyards and co coordination builds + installation, budget fees:35%, sum is RMB第九条 双方责任9.1 发包人责任 发包人按协议第五条规定的内容，在规定的时间内向设计人提交基础资料及文件，并对其完整性、正确性刚好限负责。发包人不得要求设计人违反国家有关标准进行设计。 发包人变更托付设计项目、规模、条件或因提交的资料错误，或所提交资料作较大修改，以致造成设计人设计返工时，发包人应按设计人所耗工作量向设计人支付返工费。 在协议履行期间，发包人要求终止或解除协议，设计人未起先设计工作的，不退还发包人已付

25、的定金；已起先设计工作的。发包人应依据设计人已进行的实际工作量，不足一半时，按该阶段设计费的一半支付；超过一半时，按该阶段设计费的全部支付。 发包人要求设计人派驻现场服务时，派驻现场的工作人员的差旅费由发包人负担，并按每人每天120美元的标准供应服务津贴，并供应工作、生活及交通等方面的便利条件及必要的劳动爱护装备。Article 9 Responsibility of Two Parties9.1 Responsibility of the Employer The Employer shall be deliver basic materials and documents to the d

26、esigner within the specified time in accordance requirements stipulated in Article 5, and shall be responsible for their completeness, correctness and time limit. The employer shall not request the designer to design by violating the concerned national standards.If it exceeds the prescribed time lim

27、it within fifteen days when the employer delivers above materials and documents, the designer can postpone accordingly the time of delivering the design documents in accordance with Article 6 in the contract; if it exceeds the prescribed time limit over fifteen days when the employer delivers above

28、materials and documents, the design is entitled to decide again the time of delivery of design documents. When the employer alters entrusted design items, scale, and conditions, or delivers the wrong materials, or delivers mostly revised materials so that the designer rework for the design, the empl

29、oyer shall pay for rework cost for the designer based on the amount of the work performed by the designer except the supplemental agreement (or contract) signed separately, and the relevant articles specified again by both parties through the consultation. During implementation of the Contract, when

30、 the employer requests to terminate and cancel the contract, the down payment paid by the employer shall not be returned if the designer doesnt begin the design work; if the designer starts the design, the employer shall pay half of design charge in the phase if it is less than half of the actual am

31、ount of work performed by the designer; if it exceeds the half, the full design charge in the phase shall be paid in all. The Employer should offer conveniences in aspects of working, living and traffic and necessary labor-protection equipments. The onsite worker should be provided service allowance

32、 of $120 each person per day, while employer requests long term onsite service from design company.9.2 设计人责任 设计人应按国家规定和协议约定的技术规范、标准进行设计，按本协议第五条规定的内容、时间及份数向发包人交付设计文件。并对提交的设计文件的质量负责。 设计合理运用年限为 20 年。 负责对外商的设计资料进行审查，负责该协议项目的设计联络工作。 帮助发包人向厂家订货，指导发包人支配项目进度支配。 对全部设备及辅机供应具体的规格参数、技术要求和供货范围，以作为发包方向厂家订货的协议附件。9

33、.2 Responsibilities of the Designer The designer shall perform the design in accordance with provisions of the State and the technical codes and standards stipulated in the Contract, deliver the design documents in the accordance with contents, time and number of copies to the employer specified in

34、Article 6, and be responsible for quality of the delivered design documents. The design life of the engineering construction shall be 20 years. Responsible for examining for design materials of foreign businessman, and responsible for design liaison of Contract project. Assist employer to order from

35、 vendor and to make the progress plan on this project. Provide detail information for all equipments and their accessories including specifications, technical requirement and scope of supply, that is treated as ordering contract appendix from employer side.第十条 保密双方均应爱护对方的学问产权、未经对方同意，任何一方均不得对对方的资料及文件

36、擅自修改、复制或向第三人转让或用于本协议项目外的项目。Article 10 Confidentiality Both Parties shall protect each others intellectual property rights. Without prior consent, neither party shall revise, copy or transfer to a third party or use for the project other than the project of this Contract any materials and documents o

37、f the other party, Under such circumstances, the disclosing party shall be responsible for all any consequence it resulted and shall bear the relevant compensation.第十一条 本协议在履行过程中发生的争议，由双方当事人协商解决，协商不成的按下列两种方式解决：（一）提交仲裁委员会仲裁；（二）依法向人民法院起诉。Article 11 : Arbitration If any dispute arises in connection wit

38、h this Engineering Service Contract, it shall be settled by friendly consultation of the Parties, or be submitted to the competent local construction administration department for mediation. Where the dispute can not be settled by mediation, it shall be submitted to the Arbitration Committee for set

39、tlement. Where the Parties have not agreed on the arbitration organization in the Contract nor conclude arbitration agreement in written form, the dispute will be brought the Peoples Court.第十二条 协议生效及其他12.1 本工程项目中，设计人不得指定建筑材料、设备的生产厂或供货商。发包人须要设计人协作建筑材料、设备的加工订货时，所需费用由发包人担当。12.2 发包人托付设计人担当本协议内容以外的工作服务，另

40、行签订协议并支付费用。12.3 由于不行抗力因素致使协议无法履行时，双方应刚好协商12.4 本协议双方签字盖章后即生效，一式 份，发包人 份，设计人 份。12.5双方认可的来往传真、电报、会议纪要等，均为协议的组成部分，和本协议具有同等法律效力。12.6未尽事宜，经双方协商一样，签订补充协议，补充协议和本协议具有同等效力。Article 12 : Contract effective and miscellaneous 12.1 In the projects of the Contract, Designer shall not appoint manufacturers or Designers of construction materials an