版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、视频放大器、缓冲器和滤波器新产品 ADA4420-6 - Low Cost 6-Channel HD/SD Video Filter·如果您的设计需要一个以1或2倍增益起简单缓冲作用的放大器,ADI公司为您提供了合适的解决方案。这些简单易用的缓冲放大器专门适合一种特定的增益,因此使您的设计时间减至最少。· Video Op-Amps· Video Filters· Buffers· CAT-5 Video Drivers· CAT-5 Video Receivers· CAT-5 Cable Equali
2、zers· Video RF SplittersLoading Selection Table Data. Please wait.Processing request. Please wait.Help· Sort: Click on the arrows beneath the parameter on which you would like to sort, ascending and descending order.· Add/Remove Parameters: Click on the Add/Remove Parameters button. S
3、elect/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.· Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the ta
4、ble display.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters: When applicable, select a quick filter with preset parameters filtered to narrow the results returned.Video Op-Ampshide Add/Remove Parameters-3dB Band
5、width Slew Rate Min Stable Acl Rail-Rail Out Total Harmonic Dist. Input Noise (nV/rtHz) Vcc-Vee Supply Current (max) Features Packages Price* (1000-4999) Part# R: 33-3dB BandwidthSlew RateMin Stable AclRail-Rail OutTotal Harmonic Dist.Input Noise (nV/rtHz)Vcc-VeeSupply Current(max)FeaturesPackagesPr
6、ice* (1000-4999)AD8051110MHz170V/µs1V/VYes68dB16nV/rtHz3V to 12V5.5Rail-to-Rail, Single SupplySOIC, SOT$0.86 AD8052110MHz170V/µs1V/VYes68dB16nV/rtHz3V to 12V11Rail-to-Rail, Single SupplySOIC, SOP$1.62 AD8091110MHz170V/µs1V/VYes71dB16nV/rtHz3V to 12V5.5Rail-to-Rail, Single SupplySOIC,
7、SOT$0.70 AD8092110MHz170V/µs1V/VYes71dB16nV/rtHz3V to 12V11Rail-to-Rail, Single SupplySOIC, SOP$0.90 AD829120MHz230V/µs1V/VNon/a1.7nV/rtHz9V to 36V6.5Comp Pin, NullDIP, LCC, SOIC$2.52 ADA4851-4130MHz375V/µs1V/VYes83dB10nV/rtHz2.7V to 12V12.8Rail-to-Rail, Single SupplySOP$1.10 ADA4851-
8、2130MHz375V/µs1V/VYes83dB10nV/rtHz2.7V to 12V6.4Rail-to-Rail, Single SupplySOP$0.70 AD8054150MHz145V/µs1V/VYes68dB16nV/rtHz3V to 12V13.6Single SupplySOIC, SOP$2.88 AD8044160MHz190V/µs1V/VYes75dB16nV/rtHz3V to 12V13.6Rail-to-Rail, Single SupplyDIP, SOIC$4.00 AD8041170MHz170V/µs1V/
9、VYes72dB16nV/rtHz3V to 12V6.5Disable, Power Down, Rail-to-Rail, Single SupplyDIP, SOIC$1.95 AD8042170MHz225V/µs1V/VYes73dB15nV/rtHz3V to 12V14Rail-to-Rail, Single SupplyDIP, SOIC$2.05 ADA4850-1175MHz220V/µs1V/VYes81dB10nV/rtHz2.7V to 6V2.9Power Down, Rail-to-Rail, Single SupplyCSP$0.56 ADA
10、4850-2175MHz220V/µs1V/VYesn/a10nV/rtHz2.7V to 6V5.6Disable, Power Down, Rail-to-Rail, Single SupplyCSP$0.70 AD8019175MHz400V/µs1V/VNo78dB8nV/rtHz8V to 24V21Power Down, Single SupplySOIC, SOP$3.10 AD8036240MHz1.2kV/µs1V/VNo66dB6.7nV/rtHz6V to 12V21.5Clamp AmpDIP, SOIC$3.46 AD8047250MHz
11、750V/µs1V/VNo61dB5.2nV/rtHz6V to 12V6.6n/aDIP, SOIC$2.53 AD8079260MHz800V/µs1V/VNo65dB2nV/rtHz6V to 12V11.5BufferSOIC$4.56 AD8055300MHz1.4kV/µs1V/VNo72dB6nV/rtHz8V to 12V6.5n/aDIP, SOIC, SOT$0.86 AD8056300MHz1.4kV/µs1V/VNo72dB6nV/rtHz8V to 12V12n/aDIP, SOIC, SOP$1.62 ADA4862-3310
12、MHz830V/µs1V/VNo81dB10.6nV/rtHz5V to 12V20.5Disable, Power Down, Single SupplySOIC$0.96 AD8063320MHz650V/µs1V/VYes77dB8.5nV/rtHz2.7V to 8V9.5Disable, Power Down, Rail-to-Rail, Single SupplySOIC, SOT$0.86 AD8061320MHz650V/µs1V/VYes77dB8.5nV/rtHz2.7V to 8V9.5Rail-to-Rail, Single SupplyS
13、OIC, SOT$0.86 AD8062320MHz650V/µs1V/VYes77dB8.5nV/rtHz2.7V to 8V19Rail-to-Rail, Single SupplySOIC, SOP$1.62 AD9631320MHz1.3kV/µs1V/VNo72dB7nV/rtHz6V to 12V18n/aDIP, SOIC$3.81 AD8057325MHz1.15kV/µs1V/VNo85dB7nV/rtHz3V to 12V7.5Single SupplySOIC, SOT$0.86 AD8058325MHz1.15kV/µs1V/VN
14、o85dB7nV/rtHz3V to 12V15Single SupplySOIC, SOP$1.62 AD8038350MHz425V/µs1V/VNo90dB8nV/rtHz3V to 12V1.5Disable, Power Down, Single SupplySC70, SOIC$0.86 AD8039350MHz425V/µs1V/VNo90dB8nV/rtHz3V to 12V3Single SupplySOIC, SOT$1.21 AD8021490MHz150V/µs1V/VNo93dB2.1nV/rtHz4.5V to 24V7.7Comp P
15、in, Disable, Power Down, Single SupplySOIC, SOP$1.31 ADA4860-1520MHz790V/µs1V/VNo-90dB4nV/rtHz5V to 12V8Disable, Power Down, Single SupplySOT$0.56 AD8074600MHz1.6kV/µs1V/VNo80dB19.5nV/rtHz9V to 11V30Buffer, Disable, Power Down, Single SupplySOP$2.22 ADA4861-3730MHz680V/µs1V/VNo85dB3.2
16、nV/rtHz5V to 12V20.5Power Down, Single SupplySOIC$0.96 AD80451GHz1350V/µs1V/VNo102dB3nV/rtHz3.3V to 12V16-CSP, SOIC$1.41 Help· Sort: Click on the arrows beneath the parameter on which you would like to sort, ascending and descending order.· Add/Remove Parameters: Click on the Add/Remo
17、ve Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.· Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results"
18、button to update the table display.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters: When applicable, select a quick filter with preset parameters filtered to narrow the results returned.Video Filtershide Add/Rem
19、ove ParametersStandards Resolution Variable Gain 2:1 Input MUX Pos Supply Supply Current (max) Operating Temp Range Package Price* (1000-4999) Part#R: 7StandardsResolutionVariable Gain2:1 Input MUXPos SupplySupply Current(max)Operating Temp RangePackagePrice* (1000-4999)ADA4410-6CV, RGB, SD, Y/C, YP
20、bPr, YUV1080i, 720p2x, 4xX+4.5V to +12V92mA-40 to +8532-ld LFCSP$2.52 ADA4411-3RGB, SD, Y/C, YPbPr, YUV1080i, 720p2x, 4xX+4.5V to +12V60mA-40 to +8524-ld QSSOP$1.91 ADA4412-3RGB, SD, Y/C, YPbPr, YUV1080i, 720p2x-+4.5V to +12V56mA-40 to +8520-ld QSSOP$1.61 ADA4417-3RGB, YPbPr, YUV1080i, 720p2x-+3.3V
21、to +5V24mA-40 to +8510-ld MSOP$0.80 ADA4420-6RGB, Y/C, YPbPr-+4.75V to +5.25V36mA-16-ld QSOP$0.69 ADA4430-1SD, Y/C480i2x-+2.5V to +6V1.85mA-40 to +1256-ld SC70$0.50 ADA4431-1SD480i2x-+2.5V to +3.6V4.7mA-40 to +8524-ld LFCSP$0.50 Help· Sort: Click on the arrows beneath the parameter on which you
22、 would like to sort, ascending and descending order.· Add/Remove Parameters: Click on the Add/Remove Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.
23、3; Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the table display.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters: When applicable, select
24、a quick filter with preset parameters filtered to narrow the results returned.Buffershide Add/Remove Parameters# OpAmps per Pkg -3dB Bandwidth Closed Loop Gain (dB) Vos Input Noise (nV/rtHz) Ib Vcc-Vee Supply (V) Supply Current (max) Slew Rate Operating Temp Range Price* (1000-4999) Product Descript
25、ion Part# R: 4# OpAmps per Pkg-3dB BandwidthClosed Loop Gain (dB)VosInput Noise (nV/rtHz)IbVcc-Vee Supply(V)Supply Current(max)Slew RateOperating Temp RangePrice* (1000-4999)AD80743600MHz0 or 6.022.5mV19.5nV/rtHz5µA9 to 11301.6kV/µs-40 to +85$2.22 AD80753550MHz0 or 6.022.5mV22nV/rtHz5µ
26、;A9 to 11301.35kV/µs-40 to +85$2.22 AD80792260MHz6.02 or 6.855mV2nV/rtHz3µA6 to 1211.5800V/µs-40 to +85$4.56 ADD8701134.5MHz04mV25nV/rtHz500nA7 to 16136V/µs-40 to +85*Help· Sort: Click on the arrows beneath the parameter on which you would like to sort, ascending and descend
27、ing order.· Add/Remove Parameters: Click on the Add/Remove Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.· Filter: Enter the desired value to filt
28、er parameter(s) by, and click the "Update Results" button to update the table display.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters: When applicable, select a quick filter with preset parameters filt
29、ered to narrow the results returned.CAT-5 Video Drivershide Add/Remove Parameters-3 dB BW (MHz) 0.1 dB Flatness (MHz) Minimum Gain (Acl) Slew Rate (V/us) Disable Pos Supply Supply Current (max) Features Package Price* (1000-4999) Part#R: 11-3 dB BW (MHz)0.1 dB Flatness(MHz)Minimum Gain(Acl)Slew Rate
30、 (V/us)DisablePos SupplySupply Current(max)FeaturesPackagePrice* (1000-4999)AD81314008522000-+2.7V to +11V10.25mA-8-Lead MSOP, 8-Lead SOIC$1.82 AD81334505521600X+2.8V to +11V26mA-24-Lead LFCSP$2.62 AD81344505521600X+4.5V to +11V26.5mASync-on-CM24-Lead LFCSP$2.62 AD814670020023000X+4.5V to ±5.5V
31、61.5mAAdjustable Output Common Mode Voltage24-Lead LFCSP$2.92 AD814760023523000X+4.5V to +5.5V61.5mASync on Common Mode24-Lead LFCSP$3.03 AD814870023543000X+4.5V to +5.5V62.5mASync on Common Mode24-Lead LFCSP$3.13 AD8390A45-260-+10V to +24V-$1.16 AD8392A37-515-+10V to +24V-$2.82 AD839435-300-+12V to
32、 +24V-20-Lead TSSOP, 24-Lead LFCSP$2.07 AD8396-+12V to +24V-$1.97 ADL5321-84mA-3-Lead SOT-89$2.58 Help· Sort: Click on the arrows beneath the parameter on which you would like to sort, ascending and descending order.· Add/Remove Parameters: Click on the Add/Remove Parameters button. Select
33、/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.· Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the table d
34、isplay.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters: When applicable, select a quick filter with preset parameters filtered to narrow the results returned.CAT-5 Video Receivershide Add/Remove Parameters-3 dB
35、BW (MHz) 0.1 dB Flatness (MHz) Slew Rate (V/us) Minimum Gain (Acl) Pos Supply Supply Current (max) Disable Features Package Price* (1000-4999) Part#R: 4-3 dB BW (MHz)0.1 dB Flatness(MHz)Slew Rate (V/us)Minimum Gain(Acl)Pos SupplySupply Current(max)DisableFeaturesPackagePrice* (1000-4999)AD8129200201
36、06010+4.5V to +25.2V10.8mAXLow Noise8-Lead MSOP, 8-Lead SOIC$1.57 AD81302703010901-4.5V to +25.2V10.8mAX-8-Lead MSOP, 8-Lead SOIC$1.57 AD81432606010001+4.5V to +25.2V39mAXSync-on-CM32-Lead CSP$2.58 AD814550010021001+4.5V to +11V48.5mAX-32-Lead CSP$3.03 Help· Sort: Click on the arrows beneath th
37、e parameter on which you would like to sort, ascending and descending order.· Add/Remove Parameters: Click on the Add/Remove Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new sele
38、ction of parameters.· Filter: Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the table display.· Reset Table: Click "Reset Table" to clear all filters/sorts and restore table back to default view.· Quick Filters:
39、When applicable, select a quick filter with preset parameters filtered to narrow the results returned.CAT-5 Cable Equalizershide Add/Remove Parameters-3 dB BW (MHz) Slew Rate (V/us) 0.1 dB Flatness (MHz) Minimum Gain (Acl) Pos Supply Supply Current (max) Features Package Price* (1000-4999) Part#R: 2-3 dB BW (MHz)Slew Rate (V/us)0.1 dB Flatness (MHz)Minimum Gain(Acl)Pos SupplySupply Current(max)FeaturesP
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 建筑工程设备购销合同示例
- 企业年会临时设施施工合同
- 数码设备销售合同三篇
- 2024年外币直接借贷合同
- 2024年专利技术与产品开发合同
- 2024年劳动合同填写指南:助你把握职场机遇
- 2024年小型企业循环信贷合同(简式)
- 广告承搅合同模板
- 2024年PDA设备及技术支持合同
- 教师视力保护知识培训方案
- 高中政治部编版教材高考双向细目表
- 四年级上册英语课件- M3U2 Around my home (Period 3) 上海牛津版试用版(共18张PPT)
- 轮扣式模板支撑架安全专项施工方案
- 酒店装饰装修工程验收表
- 新北师大版六年级上册数学全册教案(教学设计)
- 呼吸科(呼吸与危重症医学科)出科理论试题及答案
- 调研报告:关于棚户区改造现状、存在问题及对策建议
- 技工学校教师工作规范
- 2022年医院关于缩短患者平均住院日的管理规定
- 清新个人工作述职报告PPT模板
- GWJ 006-2016 超短波频段监测基础数据存储结构技术规范
评论
0/150
提交评论