家电产品中英文缺陷描述整理..

1、家电产品通用缺陷整理包装缺陷:包装箱、装箱带:产品堆放户外，部分纸箱渗水Somecartons of products piled outdoors are in the case of waterseepage包裝方式错误In correct p ack ing method / Differe nt p ack ing from appro ved sample包装材料脏污、褶皱或破损P ack ing material with dirt, wrin kle and damage金属带用于包装Metal stra pping is used for p ack ing as the sh

2、ar p edges are harmful toman纸箱/彩箱破損/撕裂The cart on/color box is broke n or sp lit包装严重/轻微变形，且对产品造成/未造成损伤Serious/light deform ing of p ack ing with/without damage to p roduct外箱封箱纸松动Carton glue tape looses封箱不良，箱盖開口Po orly seali ng with the cover opening包装箱实际尺寸与规格书不符The sizes of cart on are differe nt fr

3、om spec包装箱上重要信息遗漏、错误或者不清晰，诸如贴纸格式、产品型号、logo、包装箱尺寸、重量、原产地、批次等Miss ing, wrong or illegible of imp orta nt in formati on on p ack ingsuchas the form of labeli ng, model #,logo,size of cart on, weight, countryof origin ，batch etc包装箱内产品倒装The p ack ing for p roduct is up side-dow n彩箱褶皱Color box crump les彩盒

4、封口脱开Break ing of the joint on gift box包装箱内漏装泡沫或纸托Miss ing foam or paper holder for p roduct p rotect ing in the p ack ing彩箱内少配件Miss ing accessories in the p ack ing生产批次号:包装内没有生产批次号Miss ing p roduct ion p atch nu mber sealed in the p ack ing包装内生产批号不清晰Seal/label of p roducti on p atch nu mber in the p

5、 ack ing is not clear to read说明书、执行标准、对应单:产品漏装说明书Miss ing p roduct ion sp ecificati on产品说明书皱折/破损The p roduct sp ecificati on is folded/damaged包装内说明书与产品不一致Sp ecificatio n does not cover the p roduct in the p ack ing执行标准错误In struct ion sheet is wrong执行标准缺失Miss ing the in structi on sheet包装箱内对应单错误Corre

6、s ponding sheet of sp ecificati on in the p ack ing is wrong外观:产品材料/尺寸/颜色/logo/外观与样板有差异Material/size/color/logo/a pp eara neeof p roduct isdiffere ntfromappro ved sample警告标贴粘贴不良:警告标贴有破损The warning label is damaged产品缺少警告标贴Miss ing the warning label产品警告标贴翘边Warning label with flapping edge/lift ing警告标贴

7、脱落Warni ng label with p eeli ng off警告标贴脏污Warning label is dirty警示语/安全手册遗漏Miss ing cautio n/warni ng/safety in structi on产品合格证粘贴不良:产品合格证贴偏Certificate of con formity of p roduct is sla nti ng产品合格证有破损Certificate of con formity is damaged产品缺少产品合格证Miss ing the certificate of con formity产品合格证翘边Certificate

8、 of con formity with flapping edge/lift ing产品合格证褶皱Certificate of con formity is folded产品合格证脱落Certificate of con formity with p eeli ng off产品合格证脏污Certificate of con formity is dirty产品合格证上的制造商名称与铭牌不一致Name of manu facturer on certificate of con formity does not accord with the n ame plate产品铭牌粘贴不良:产品铭牌贴

9、纸有明显气泡There are obvious bubbles on the n ame plate of p roduct产品上有重复粘贴的铭牌There are rep eated stick up n ame plates on the p roduct铭牌缺失Miss ing n ame plate铭牌翘边Name pl ate with flapping edge/lift ing铭牌褶皱Name pl ate is folded铭牌粘贴与指定位置有明显偏差Name pl ate is slight out of the desig nated p ositi on铭牌颠倒Name

10、pl ate is up side-dow n铭牌脏污Name pl ate is dirty能效标签粘贴不良:能效标签缺失Miss ing the En ergy Rati ng Label能效标签破损/脏污/褶皱/翘边/颠倒En ergy Rat ing Label is damaged/dirty/folded/lift ing/up side-dow n条形码:条形码信息与铭牌/说明书信息不符Bar code Scanned nu mber is not conform to the nu mber prin ted on thelabel/s pec条形码区域破损导致不可读Broke

11、 n or tear damage of the bar cord area occurs the un-readi ng印刷、喷油不良:喷油擦花Paint with abradi ng印刷不清晰，不可读Un-clear printing could not be read印刷脏污/褪色Printing is smeared/off colored丝印不良:丝印刮花Scratch on silk-scree n丝印不清The silk-scree n is not clear to read丝印内容有误The content of silk-scree n is wrong外部螺钉:螺丝生锈S

12、crew with rust ing螺丝打花Screw with stri pping螺丝断Screw broke n螺钉翘起Un eve n screw covers螺孔刮花Scratch on screw hole螺丝未锁紧Screw isnt locked tightly固定螺柱断裂The bolt fixing the shell of p roduct is broke n漏装一颗固定螺钉Miss a screw for fixing the shell铆钉未完全翻边The rivet isnt rolled prop erly and tightly漏打特殊螺钉Miss ing t

13、he sp ecial screw产品表面:外壳/附件破碎En closure or p arts is broke n产品装配错位Assembly with dislocati on产品微晶板错位The microcrystalli ne panel is dislocated产品表面变形The surface of p roduct deforms产品表面有凹痕，凹痕尺寸为*There is dent mark on the surface of product shell ， the mark is between * to * square cm/mm .产品表面有刮花，划痕尺寸为*T

14、here is scratched mark on the surface of p roduct shell , the len gth is * cm/mm .产品表面有脏污，脏污点尺寸为*There is dirt mark on the surface of p roduct shell , the spot is over * square cm/mm产品表面有污垢，可擦掉的/不可擦掉的There is dirt on the surface of p roduct shell, which is removable /irremovable产品金属表面生锈There is corr

15、osi on mark on metal surface of p roduct产品表面有溢胶There is glue water mark on the surface of p roduct产品微晶板侧面崩缺The side face of microcrystalli ne panel is colla psed微晶板破损Microcrystalli ne panel is broke n产品微晶板溢胶There is un clea ned glue water mark in the gap of microcrystalli ne panel产品塑料部分（如手柄）成型不良Ther

16、e is p eeli ng of chrome p lati ng发热盘涂层表面划花There is scratch mark on the painting surface of heati ng p late产品内胆有污垢There is dirt mark on the internal bladder of p roduct陶瓷表面有针眼There are pin holes on the surface of ceramic制陶不良，表面有凹线Ceramics is poor that there is con cave line on the surface of p roduc

17、t产品表面掉漆The painting on the surface of p roduct p eels off产品表面涂料不均匀The surface coati ng of p roduct is un eve n产品表面油漆涂层起浮点There are float ing points on the surface of paint coati ng锅柄焊接不良The han dle of pot is poor weldi ng产品塑料部分有披锋/毛刺There is flash in g/burrs mark on the p lastic p arts of p roduct产品

18、手柄部分有锐边PIastic part(handle ) of product is poorly molded产品焊接锐边Weldi ng- shar p edge of xp roduct may cause injury锅盖塑料部分有毛边The pl astic part of pot cover has burrs水壶基座有毛刺There are burrs on the base of p roduct产品底部螺丝有锐边There are shar p edges of screws on the bottom of p roduct产品结构缺陷:咅 E件组装不正确 P arts o

19、f the p roduct have n ot bee n assembled correctly间隙问题:产品金属件与塑料件间隙大于1.0 mmThe gap betwee n metal and p lastic p arts is over 1.0 mm外壳装配不到位，间隙达到2mmEn closure is not secured in p lace or with excessive gaps 2.0 mm手柄间隙为0.76mmThe gap of han dle is 0.76mm机头外壳尺寸偏大，机头外壳与机架耦合处突出0.81.3mmThe size of shell is

20、so large to nose that the prominent coupling between the shell a nd the rack is 0.8-1.3mm产品面盖与顶板配合间隙大于 0.8mmThe gap betwee n the panel and the roof is greater tha n 0.8mm底部塑料与温控器配合间隙为 0.8mmThe gap betwee n the p lastic part of bottom and thermostat is 0.8mm产品底部与壶身配合间隙为0.5mmThe gap betwee n bottom an

21、d body of p roduct is 0.5mm安装不到位、部件松脱:部件未装紧或引起脱落P arts assembled are so loose that may cause drop off部件不定位P arts assembled cannot hold po siti on产品金属外部镀铬层剥落There is shar p edge on the han dle of p roduct虚焊、脱焊、焊穿或者焊接点过小可能影响使用功能Welding- false welding， mesh welding loose ， welding through parts or weld

22、i ng joi nt is too minor which may affect fun cti on锁紧装置过松或者过紧The latch mecha nism is too tight to op erate or too loose to be locked脚垫装配过松导致脱落The rubber foot is too loose with falli ng off橡胶垫松脱Rubber feet looses out电水壶底座与壶体离拉/错位For electric kettle，there is gap/step between base and bottom控制面板、开关:产品

23、控制面板保护膜起皱P rotective membra ne coveri ng onto Con trol Panel is folded按键卡住Key/butt on is jammed/stuck按键太紧Key/butt on is too tight whe n p ress ing开关不能复位Switch could not reset开关接触不良Po wer switch in terr up ted保温开关灵敏度低The sen sitivity of in sulati on switch is poor控制面板上字体印刷不良Poor prin ti ng on con tro

24、l panel控制面板刮花Scratch on the con trol panel控制面板尺寸与规格书要求不符The height of control panel is differentfrom the technicalrequirement.height of control panel is 120mm,and the technical requirement is 130.5mm控制面板上的按钮用2030N的力可以拔出The butt ons on con trol panel would be p ulled out with forces 20N胶脚、支架:支架倾斜超过要求

25、The legs sla nt outwards/i nwards more tha n requested胶脚不平Rock ing on rubber foot漏装胶脚Miss ing rubber foot胶脚松脱Rubber foot looses附件、元件：漏装附件Miss ing components产品发热元件与零部件清单上不一致pare P arts listThe heati ng eleme nts of p roduct do not accord with S电源线型号没有报备Style of supply cord do not accord with submitte

26、d插头生锈Plug pins is rusted/oxidized电源线脏污There is dirt mark on po wer supply cord电源线损坏，绝缘层/导线外漏Mains cable is damaged so as to 2nd in sulati on layer an d/or con ductors exposes电源线夹紧装置松脱Clamping device for po wer cord looses火线外漏Live wire expo sed电源线可触及The po wer cord could be touched from the outside过滤

27、网损坏Damaged filter scree n内胆刮花Scratch on the internal bladder产品配件炒锅中缺少手柄There is lack of handle to wok which belongs to the product accessories产品使用的电源线制造商为*，CB报告中没有覆盖。The power cord applied is manufactured by *, which does not comply with the CB rep ort.内部结构:产品内部线路混乱In ternal conn ecti on wires dishe

28、veled产品内部电线护套有破损The sheath ing material for in ternal wire is damaged产品内部脏污Dirty mark on the in terior of the p roduct内部金属异物Metallic residue in side un it which can cause p ossible risk of electric shock产品内部有塑胶/金属异物There is p lastic/metal foreig n body in side the p roduct产品内部接线端子处无电源中性线“N及接地符号“”标识，

29、不符合GB4706.1标准中的第7.8章要求There are no po wer n eutral N and grounding symbol,which donot comply to the requirements in the sections 7 and 8 of standard GB4706.1产品电源线中性线“ N标识粘贴位置错误，不符合标准 GB4706.1要求The po siti on Power n eutral N is posted on does not comply to therequireme nts of sta ndard GB4706.1产品内部关

30、键元件无报备，如The critical components in side the p roduct is not submitted in P artsList , such as相关测试:实验设备无校准记录The equipment for testi ng is without calibrati on data at site .工厂无检具，此项试验无法进行The test is can celled due to no suitable check ing fixture in the factory .因工厂无仪器，能耗测试无法进行No in strume nt was sup

31、p lied for po wer consump ti on check关键元器件对照Critical Components Marking Comp aris on此项试验不适用The test does not apply，so its纸箱不能通过边压测试，耐破度不合格The board could not p ass the Edgewise Crush Resista nee testMulle n test is failure跌落测试后，包装出现破洞、撕裂或者缺口，产品明显受损After Carton Drop test, the packaging appears holes,

32、 tears, or openings.跌落测试后产品受损After Carton Drop test, the p roduct is obviously damaged产品跌落测试后锅柄断裂Panhan dle is broke n after Carton Drop test彩盒跌落测试汤锅手柄脱焊The han dle of pot is seali ng-off after Carton Drop test功能缺陷During the Fun cti onal check , there is someth ing functional p roblems of the p rodu

33、ct功能指示器损坏Fun cti on in dicators is damaged指示灯不亮In dicator lamp on switch could n ot lit up指示灯不亮、颜色暗淡或错误In dicator light is inop erative, dimmed, or in wrong colors按钮开关或产品功能间歇Pu shbutt on switch or unit function is in termitte nt间歇无功能In termitte ntly non-fun cti on风扇不工作Fan can not rotate把手运作不顺畅The ha

34、n dle cant work well条形码读取失败UPC can not be read/Bar Code Readability Check failed3M胶纸及耐磨实验不合格3m glue tape test and Rubb ing test for all scree n printing failed手柄拉力测试不合格p ull test for han dle failed插片与端子连接处只能承应*Kg的拉力The jointbetween the insert and the terminal connection could only bear电源线拉力测试不合格Po wer cord strain relief check failed电源线弯折测试不合格Bending test of conn ecti on wire failed电流/功率不合规格Curre nt or wattage is out