手套箱隔板不带cd线性磨耗-英文

1、Quotation No.:GQD140756Report No.:GSTA2014100862-29ENRandom Code:385876 Page 1 of 6 pagesTest ReportClient: Address: DUNS:Shanghai Hanshi Molding Shape Co., Ltd. No. 355, YouDong Road, Shanghai, P.R China BEZEL - I/P Compt (NO CD)Part Number: 1148123 Model: OmegaManufacture Date:2014-12-08Weight: 47

2、5gTested Sample:Material and grade: PP/PE-M15 EF267AICColor: BlackSample Description:2014-12-09Evaluation Type: PVReceiving Date:Technical Specification:GMW16741-2012Test Items:1Linear AbrasionAccording to clients requirements, the test has been conducted on received samples. Refer to page 2 for det

3、ails of results.Test Results:Edited by:Zhang WeiqiChecked by:Yu YaApproved by:Guo XiaofangSignature:Signature:Signature:Date of issue:2015-03-31Global-Standard (Shanghai) Testing Technology Co., Ltd.冠标(上海)检测技术Quotation No.:GQD140756Report No.:GSTA2014100862-29ENRandom Code:385876 Page 2 of 6 pagesTe

4、st SummaryGlobal-Standard (Shanghai) Testing Technology Co., Ltd.冠标(上海)检测技术Section No.Clause No.Test ItemRef. StandardEvaluationSection 001GMW16741-20123.8.1Linear AbrasionGMW14125-2009PassQuotation No.:GQD140756Report No.:GSTA2014100862-29ENRandom Code:385876 Page 3 of 6 pagesSample PhotosGlobal-St

5、andard (Shanghai) Testing Technology Co., Ltd.冠标(上海)检测技术A14086202A14086202Quotation No.:GQD140756Report No.:GSTA2014100862-29ENRandom Code:385876 Page 4 of 6 pagesSection 001 Linear AbrasionGlobal-Standard (Shanghai) Testing Technology Co., Ltd.冠标(上海)检测技术Ref.StandardGMW14125-2009Date of Test2015-01-

6、06 2015-01-07Tested Sample ID.A140862020110Test Conditions1. According to the condition below, test samples in order:a. As-receivedb. After humidity: (382), (955)%RH for 24h, test linear abrasion within 10min;c. After solvent exposure naphtha: Place the cotton rubbing cloth with naphtha over the tes

7、t specimen and allow it to remain there for five minutes. Remove the cloth and immediately test the specimen.2. Linear Abrasion condition(A2X2):10mm scraper, Pressure force 10N, Stroke 50mm, 10 cycles, speed 30 cycle/min3. Evaluate the appearance visually.Test InstrumentsNo.NameTypeNumberCalibration

8、Valid Date1High Humidity Test ChamberKK-300EQ-01062015.09.022Reciprocating abrasion machineTABER 5900EQ-01262015.03.30Test RequirementA slight mark is acceptable; A noticeable mark is not.Test ResultsSample No.ConditionResultVerdict9-1As-receivedShow a slight markP9-2Show a slight markP9-3Show a sli

9、ght markP9-4After humidityShow a slight markP9-5Show a slight markP9-6Show a slight markP9-7After solvent exposure naphthaShow a slight markP9-8Show a slight markP9-9Show a slight markPTest ConclusionsPassRemarkP: Pass; F:Fail; “”:Not ApplicableQuotation No.:GQD140756Report No.:GSTA2014100862-29ENRa

10、ndom Code:385876 Page 5 of 6 pagesSection 001 Linear AbrasionTest PicturesGlobal-Standard (Shanghai) Testing Technology Co., Ltd.冠标(上海)检测技术TestingTesting9-1,9-2,9-3 Post-test9-4,9-5,9-6 Post-test9-7,9-8,9-9 Post-testQuotation No.:GQD140756Report No.:GSTA2014100862-29ENRandom Code:385876 Page 6 of 6

11、pagesImportant1.This report is invalid without the seal of GST.2.This report is invalid without the signatures of tester and approver.3.This report is invalid if altered.4.No part of this report is allowed to be reproduced without thewrittenpermission from GST.5.Generally, commission test is responsible for the tested samples only.6.Objections to this report must be submitted to GST within 15 days after thisreport is received.Address: No.19, Lane 156,Changji Road, Jiading District ,Sh