戴尔DELL笔记本最新BIOS 中英文对照表

1、（有些项目为机器可选配置）General 常规信息OptionDescription中文System Information系统信息This section lists out the primary hardware features of the system. There are no configurable options in this section, only information.Lists the the following: System Information o BIOS Version o Service Tag o Asset Tag o Ownership T

2、ag o Manufacture Date o Ownership Date Memory Information o Memory Installed o Memory Available o Memory Speed o Memory Channel Mode o Memory Technology o DIMM A Size o DIMM B Size Processor Information o Processor Type o Core Count o Processor ID o Current Clock Speed o Minimum Clock Speed o Maximu

3、m Clock Speed Device Information o Primary Hard Drive o Modular Bay Device o System eSATA Device o Dock eSATA Device oo Video Controller o Video BIOS Version o Video Memory o Panel Type o Native Resolution oo Audio Controller o Modem Controller o Wi-Fi Device o Cellular Device o Bluetooth Device 该选项

4、列出系统的主要硬件信息。此处仅提供信息，无法修改。 系统信息 o BIOS 版本 o 机器编号 o 资产编号 o Ownership编号 o 出厂日期 o Ownership日期 内存信息 o 安装内存容量 o 可用内容容量 o 当前内存频率 o Memory通道 o Memory技术 o DIMM A尺寸 o DIMM B尺寸 CPU信息 o CPU型号 o CPU核数（几核） o CPU ID o 当前时钟频率 o 最小时钟频率 o 最大时钟频率 设备信息 o 主硬盘容量 o 光驱型号 o 系统eSATA设备 o Dock eSATA 设备 oo 显卡 o 显卡BIOS版本 o 显存大小

5、o 液晶屏类型 o 分辨率 oo 声卡 o Modem控制器 o Wi-Fi 设备型号 o Cellular Device o 蓝牙 Battery Information电池信息Indicates the primary battery and the media bay battery status. Also displays the AC adapter type connected to the system.侦测主电池和第二块电池状态，也显示AC 外接电源的型号。Boot Sequence启动顺序The computer attempts to boot from the sequ

6、ence of devices specified in this list: Diskette drive USB Storage Device CD/DVD/CD-RW Drive. Internal HDD (IRRT) Cardbus NIC Onboard NIC This list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select the device to be ch

7、anged in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys to change the boot order of the device. The boot devices can also be de-selected from the list using the check boxes.This also where the UEFI boot option can be enable or disable.计算机尝试从以下列表顺序启动： 软驱 USB存储设备 光驱 Internal

8、 HDD (IRRT) Cardbus NIC Onboard NIC 我们可以勾选需要启动的设备。并在界面右侧对显示的设备设置启动的顺序，可以通过鼠标也可以通过上下键选择。我们可以通过选择UEFI BIOS启动，点击“Add Boot Option”自定义启动选项。Date/Time日期/时间Displays current date and time settings.显示当前的日期和时间System Configuration 系统配置OptionDescription描述Integrated NIC集成网卡Enables or disables the onboard LAN cont

9、roller. The settings are Disabled, Enabled and Enabled w/PXE.Default setting: Enabled w/PXE启用或禁用主板LAN控制器；设置有：禁用，启用或启用w/PXE；默认设置是启用w/PXEParallel Port并口This field determines how the parallel port on the docking station operates. The settings are Disabled, AT, PS2 and ECP.Default setting: ECP并口设置选项：禁用，

10、AT，PS2 和ECP默认设置是ECP。Serial Port串口This field determines how the integrated serial port operates. The settings are Disabled, COM1, COM2, COM3 and COM4.Default setting: COM1串口设置选项：禁用，COM1，COM2，COM3，COM4默认设置是COM1SATA OperationSATA设置This option configures the operating mode of the internal SATA hard driv

11、e controller. The settings are Disabled, ATA, AHCI, and RAID On.Default setting: RAID On = SATA is configured to support RAID modeSATA Operation 设置选项：禁用，ATA ， AHCI 和 Raid On默认设置是 Raid On=SATA 设置支持RaidMiscellaneous Devices多种设备设置Use the check boxes to enable/disable the following devices: Internal Mod

12、em Module Bay ExpressCard or PC Card Media Card, PC Card and 1394 External USB Port Microphone eSATA Ports Hard Drive Free Fall Protection Camera / Microphone Default setting: All enabled.请点击复选框启用/禁用下面设备： 内置Modem 模块设备 ExpressCard 或 PC Card SD卡, PC卡和1394 外置USB口 内置麦克风 eSATA口 自由落体硬盘保护 摄像头 / 麦克风 默认所有设备启

13、用。Latitude On； ReaderThis field lets you choose the operating mode of the Latitude On； Reader. Default setting: Enabled启用或禁用Latitude On Reader默认启用Latitude On Reader。Keyboard Illumination键盘背景光（如没有配置背景光键盘该项不会出现）This field lets you choose the operating mode of the keyboard illumination feature. Setting

14、s are Disabled, Auto ALS and Input and Auto Input OnlyDefault setting: Disabled键盘背景光设置选择：禁用，自动ALS调节，自动调节默认设置禁用键盘背景光。Video 显示设置OptionDescription描述Ambient Light Sensor环境感光器Enabling ambient light sensor will allow your system to automatically change the brightness of your systems LCD panel based on the

15、 amount of light in the environment.Default setting: Disabled自动根据周围环境改变显示器的亮度默认设置禁用。LCD BrightnessLCD亮度This option (represented by a slider bar for On Battery and On AC) sets the panel brightness when the ambient light sensor is off.在环境观光器关闭时，可以分别设定连接电源或电池时显示器的亮度。Security 安全设置OptionDescription描述Admi

16、n Password管理员密码This field lets you set, change, or delete the administrator (admin) password (sometimes called the setup password). The admin passwaord enables several security features when set including: Restricts changes to the settings in Setup Restricts the boot devices listed in the F12 Boot M

17、enu to those enabled in the Boot Sequence field. Prohibits changes to the owner and asset tags. Substitutes for the system password if the system prompts for a password during power on. Successful changes to this password take effect immediately.Default Setting: Not setNOTE: If you delete the admin

18、password, the system password is also deleted. Also, the admin password can be used to delete the HDD password. For this reason, you cannot set an admin password if a system password or HDD is already set. The admin password must be set first if used in conjunction with a system and/or HDD password.

19、 该页面可以设置，修改，或删除Admin 密码。设置了Admin密码将启用下面安全功能： 限制改变BIOS设置 限制F12启动菜单的设备 禁止修改Owner和Asset编号 在POST界面可以替代system password 默认没有设置Admin 密码。注意：如果删除Admin 密码，System 密码也被删除。Admin密码可以被使用去删除硬盘密码。但是必须首先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置Admin密码。System Password系统密码This field lets you set, change, or delete the syste

20、m password (previously called the Primary password).Default Setting: Not set该页面可以设置，修改，或删除System 密码。（之前版本将Primary密码）默认没有设置System密码。Internal HDD Password内置硬盘密码This field lets you set, change, or delete the password on the systems internal hard disk drive (HDD). Successful changes take place immediate

21、ly and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even when installed in another system. Default Setting: Not set该页面可以设置，修改，或删除硬盘密码。硬盘密码将跟随硬盘，将硬盘连接到其他机器，也需要输入硬盘密码。默认没有设置硬盘密码。Password Bypass密码跳过This option lets you bypass the system and internal HD

22、D password prompts during a system restart or when resuming from a standby state. Settings are Disabled and Reboot BypassThe system will always prompt for the set system and internal HDD password when powered on from an off state (cold boot).Default Setting: Disabled在系统重启或者休眠恢复状态，让你绕过硬盘和System密码。设置选

23、项：禁用和重启绕过。系统关机到开机（冷启动时），仍然需要输入密码。默认设置：禁用Password Change密码修改设置This option lets you determine whether changes to the System and HDD passwords are permitted when an Admin password is set. Use the check box to allow or disallow changes.Default Setting: Allow Non-Admin Password Changes checked该选项启用后是在设置了

24、Admin密码后，可以对系统和硬盘密码进行修改和设置，但不能修改BIOS其他项目；默认选择允许对非Admin密码修改。可以在需修改的页面的点击Unlock后，输入Admin密码对BIOS进行修改。Strong Password强安全密码This option enforces strong passwords. If enabled, all passwords must contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling th

25、is feature automatically changes the default minimum password length to 8 charactersDefault Setting: Disabled启用强大密码功能，所有的密码设置时必须包括至少一个大写字母和一个小写字母，至少8位。默认禁用。TPM SecurityTPM安全设置This option lets you control whether the Trusted Platform Module (TPM) in the system is enabled and visible to the operating

26、system. When disabled (check box is empty), the BIOS will not turn on the TPM during POST. The TPM will be non-functional and invisible to the operating system. When enabled (check box filled) the BIOS will turn the TPM on during POST so the it can be used by the operating system.NOTE: Disabling thi

27、s option does not change any settings you may have made to the TPM, nor does it delete or change any information or keys you may have stored there. It simply turns off the TPM so that it cannot be used. When you re-enable the TPM, it will function exaclty as it did before it was disabled. Once TPM i

28、s enabled (check box filled), system will be shut down and restarted automatically before the available settings are visible.The available settings are: Deactivate, Activate, and Clear.With the TPM in Deactivate mode it will not execute any commands that use the resources of the TPM, nor will it all

29、ow any access to stored owner information.The Clear setting allows the owner information stored in the TPM to be cleared. Use this to restore the TPM to its defalut state if you lose or forget the owner authentication data. TPM模块在中国大陆区域没有提供。该项让您控制是否在操作系统下是否启用或者可见TPM。当禁用TPM （复选框为空），在POST界面，BIOS不能启用TP

30、M。在操作系统下，TPM不可见，无功能。当启用TPM， 在POST界面，BIOS即可启用TPM，在操作系统下，TPM可以正常使用。一旦TPM启用，系统将自动重启。可以选择的设置项：不激活、激活、清除TPM信息Computrace；追踪功能This field lets you activate or disable the BIOS module interface of the optional Computrace software. The settings are Deactivate, Disable, and Activate.Default Setting: Deactivate

31、NOTE: The Activate and Disable options will permanately activate or disable the feature and no further changes will be allowed. 激活/不激活/关闭&ldquo；丢失追踪功能&rdquo；。需要专业软件支持。(国内一般不提供该功能。）默认：不激活。CPU XD SupportCPU XD支持This field enables or disables the Execute Disable mode of the processor. Use the check box

32、 to enable / disable this feature.Default setting: Enabled启用或禁用CPU数据执行保护默认启用。Non-Admin Setup Changes非Admin修改设置This option lets you determine whether changes to the setup option are permited when an administrator password is set. If disabled the setup option is locked by the admin password. It cannot

33、 be modified unless setup is unlocked. Use the check boxes to allow / deny access to the Wi-Fi Catcher Changes and / or Wireless Switch Changes within the system setup.当设置了Admin 密码，该项可允许/禁用修改WIFI开关设置和WIFI Catcher设置 许可不需要管理员密码可以修改或者删除无线设置 拒绝需要有效的管理员密码 Password Configuration密码配置This field control the

34、minimum and maximum length of Admin and System passwords from 1 to 32 characters.密码的最小和最大的字符数设置。Admin Setup LockoutAdmin锁定This field lets the you prevent users from entering Setup when an Admin password is set.当设置了Admin 密码，将阻止其他用户进入BIOS。Performance 性能OptionDescription描述Multi Core Support多核支持This fie

35、ld specifies whether the processor will have one or all cores enabled. Settings are All, 1, and 2.Default Setting: All设置CPU的核数：所有，1，2默认是启用所有的CPU核数Intel； SpeedStep；Use the check box to enable / disable the processor performance mode.Default Setting: Enabled点击复选框，启用或禁用CPU性能模式默认是启用。Intel； TurboBoost；Us

36、e the check box to enable / disable the Intel； TurboBoost； performance.Default Setting: Enabled点击复选框，启用或禁用Intel TurboBoost默认是启用。Power Management 电源管理OptionDescription描述AC BehaviorUse the check box to enable / disable the computer to power up from the off or hibernation state when an AC adapter is in

37、serted.Default Setting: Wake on AC Disabled点击复选框，启用或禁用连接AC即可启动计算机。默认：禁用AC唤醒。Auto On Time唤醒时间This field sets the of days, if any, when you would like the system to turn on automatically. The settings are Disabled, Everyday, or Weekdays.Default setting: Disabled该界面可以设置唤醒时间。禁用唤醒每天唤醒每周唤醒默认关闭唤醒USB Wake S

38、upportUSB 唤醒Use the check box to enable / disable the ability for USB devices to wake the system from Standby.Default setting: DisabledNOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the BIOS will remove power from all

39、of the USB ports to conserve battery power. 点击复选框，启用或禁用待机后USB设备唤醒默认禁用USB设备唤醒。启用USB设备唤醒，只作用于外接电源工作状态。在单独使用电池时，待机后，BIOS自动切断所有USB设备的电源，无法使用USB设备唤醒。Wake on LAN/WLAN网络唤醒This field allows the computer to power up from the off state when triggered by a special LAN signal or from Hibernate state when trigge

40、red by a special wireless LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. Disabled Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN. LAN Only Allow the system to be powered on by s

41、pecial LAN signals. WLAN Only Allow the system to be powered on by special WLAN signals. LAN or WLAN Allow the system to be powered on by special LAN or wireless LAN signals. Default setting: Disabled关闭或启用远程LAN唤醒 Disabled 关闭LAN/WLAN 唤醒. LAN Only 允许LAN唤醒 WLAN Only 允许WLAN唤醒 LAN or WLAN 允许LAN和WLAN唤醒 默认

42、：关闭ExpressCharge快速充电This field lets you select fast the battery will charge. Standard = The battery will charge over a longer period of time.ExpressCharge = Dell fast charging technology (not available for all batteries).Default setting: ExpressCharge标准=电池充电时间较长快速充电=Dell快速充电技术（不适用于所有的电池）默认：快速充电Charg

43、er Behavior设置充电This field lets you enable / disable the battery charger. If diabled, the battery will not lose power when the system is connected to an AC adapter but it will not charge either.Default setting: Charger Enabled启用或禁用电池充电如果禁用充电，电池将不被充电。默认：启用充电POST Behavior 启动相关OptionDescription描述 Adapte

44、r Warnings电源警告Use the check box to enable / disable the BIOS warning messages when you use certain power adapters. The BIOS displays these messages if you attempt to use a power adapter that has too little capacity for your configuration.Default Setting: Enabled.点击复选框，启用或禁用当前电源使用情况的BIOS警告信息。如尝试使用太低容

45、量的电源适配器，BIOS将显示提示信息。默认：启用Keypad (Embedded)小键盘设置This option lets you choose one of two methods to enable the keypad that is embedded in the internal keyboard. Fn Key Only The keypad is only enabled when you hold down the ； key. By Num Lk The keypad is enabled when (1) the Num Lock LED is on and (2) n

46、o external keyboard is attached. Note that the system might not notice immediately when an external keyboard is detached. NOTE: When Setup is running, this field has no effectSetup works in the FN Key Only mode. Default Setting: Fn Key Only.数字小键盘的设置选项： 通过Fn键来控制小键盘 ；必须按住Fn键再输入带有小键盘的字母键。 通过Num lk键来控制小

47、键盘 ；该项设置后，按Num LK键点亮数字锁定灯，直接按带有小键盘的字母键。 默认：Fn控制Mouse/Touchpad鼠标和触摸板This option defines how the system handles mouse and touch pad input. Serial Mouse Use a serial mouse and disable the internal touch pad. PS/2 Mouse Disable the integrated touch pad when an external PS/2 mouse is present. Touchpad-PS

48、/2 Leave the integrated touch pad enabled when an external PS/2 mouse is present. Default Setting: Touchpad-PS/2.鼠标和触摸板输入设置选项： 使用串口鼠标时，禁用触摸板 Ps/2口鼠标连接时，禁用触摸板 当外接鼠标存在时，保留使用触摸板 默认设置：Touchpad-PS/2 （当外接鼠标存在时，保留使用触摸板 ） Numlock LED数字灯Use the check box to enable / disable the Num Lock LED when the system b

49、oots.Default Setting: Enabled.点击复选框，在系统启动时启用或禁用数字锁定灯。默认：启用USB EmulationUSB设备This option defines how the BIOS, in the absence of a USB-aware operating system, handles USB devices. USB emulation is always enabled during POST. Use the check box to enable / disable this feature.Default Setting: Enabled.

50、该界面可以设置在计算机POST界面，启用或禁用USB设备、 点击复选框，启用USB emulation 如设置禁用，将不能从任何USB总线设备（软驱，硬盘，u盘） 启动 默认：启用Fn Key Emulation外置键盘Fn设置This field lets you use the ； key on an external PS/2 keyboard the same way you use the ； key on the computers internal keyboard. Use the check box to enable / disable this feature.USB k

51、eyboards cannot emulate the ； key if you are running an ACPI operating system such as Microsoft； Windows； XP. USB keyboards will only emulate the ； key in non-ACPI mode (e.g., when you are running a DOS).Default Setting: Enabled.在外接键盘上使用 ； 代替内置键盘Fn的功能。点击复选框，启用或禁用 ；的Fn功能。可用于DOS系统下外接键盘。默认：启用Fast Boot快

52、速启动This field can speed up the boot process by bypassing some compatibility steps. Minimal Boot quickly unless the BIOS has been updated, memory changed, or the previous POST did not complete. Thorough Do not skip any steps in the boot process. Auto Allow the operating system to control this setting

53、 (this works only when the operating system supports Simple Boot Flag). Default Setting: Minimal.该界面可以设置CPU加速启动 最快 除BIOS 被修改，内存改变或者上次启动没有完成，将执行快速启动 完全 在启动过程中不跳过任何的步骤 自动 允许操作系统控制(仅在操作系统支持Simple Boot Flag). 默认：最快Intel Fast Call for HelpIntel快速呼救Used in conjunction with iAMT 4.0. Allows users to initia

54、te contact with a management console while residing outside of the corporate infrastructure (i.e. remote location, behind a firewall or NAT, etc.) Use the check box to enable / disable this feature.Default Setting: Disabled配合iAMT 使用，允许用户在公司外的场合联系管理端。点击复选框，启用或禁用快速求救默认：禁用Virtualization Support 虚拟化支持Op

55、tionDescription描述 Virtualization虚拟化This field specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel； Virtualization Technology. Use the check box to enable / disable this feature.Default Setting: Enabled该界面设置：虚拟计算机是否可以利用额外的硬件兼容性提供Intel 虚拟化技术。点击复选框，启用或禁用虚拟化技术默认：启用VT for Direct I/OThis option specifies whether a Virtual Machine Monitor (VMM) can ut