组态软件使用手册

1、Configuration Software ManualImportant NoticeThis guide is delivered subject to the following conditions and restrictions:*This guide contains proprietary information belonging to RISCO Group. Such information is supplied solely for the purpose of assisting explicitly and properly authorized users o

2、f the system.*No part of its contents may be used for any other purpose, disclosed to any person or firm, or reproduced by any means, electronic or mechanical, without the express prior written permission of RISCO Group.*The information contained herein is for the purpose of illustration and referen

3、ce only.*Information in this document is subject to change without notice.*Corporate and individual names and data used in examples herein belong to their respective owners.Table of ContentsChapter 1 Getting Started. 51.1 System Requirements.51.2 Hardware Setup.61.2.1 Local .61.2.2 Remote PSTN Conne

4、ction .61.2.3 Remote GSM Connection .71.2.4 TCP/IP Ethernet Connections .71.2.5 Remote GPRS Connection .81.3 Installing the Configuration Software Program.81.4 Initializing the System Database .101.5 Using the Advanced Database Connection Utility .121.6 Setting the Software Language.131.7 Activating

5、 the Configuration Software from your Desktop.14Chapter 2 Your Screen. 152.1 Main Menu.162.2 Tool Bar .162.3 Directory (Navigation Tree Map) .172.4 Client List .192.5 Connection Indication.192.6 Elapsed Time .192.7 Fault Indication .192.8 Status Indication .192.9 Partition Indication.192.10 Main Scr

6、een .192.11 Path .19Chapter 3 Main Menu Options . 203.1 Client.203.1.1 New Client .203.1.2 Find.223.1.3 Refresh .223.1.4 Close.223.1.5 Remove .223.1.6 View Previous Screen.223.1.7 Save Current Screen.223.1.8 Save .223.1.9 Save as.223.1.10 Backup .233.1.11 Logout.233.1.12 Exit.233.2 View .233.3 Commu

7、nication.233.3.1 Send.233.3.2 Receive .243.3.3 Restore Defaults .243.3.4 Verify.243.3.5 Connect/Disconnect.263.3.6 Configuration .263.4 Tools.303.4.1 Authorization .30Report.333.4.2 Screen.333.4.3 Audit .343.5 Help.343.5.1 About .34Chapter 4 Client Connection Settings. 35Chapter 5 System Overview .

8、36Chapter 6 System Configuration. 376.1 System Screen.376.2 Wireless Devices .376.3 Codes .376.4 Communication.386.5 Alarm Receiving Center .386.6 Configuration Software .386.7 Follow Me .38Chapter 7 Audio. 39Chapter 8 Scheduler . 40Chapter 9 Radio Device Allocation. 429.1 Identification.429.2 Addin

9、g a wireless device to the system.429.3 Deleting Wireless Accessories .44Chapter 10 System Status . 45Chapter 11 Testing. 48Chapter 12 Event Log . 49Appendix A Report Codes . 51Chapter 1 - Getting StartedThis manual explains how to use the Agility Configuration Software supporting RISCOGroups Agilit

10、y Flexible Wireless Solution. By using the Configuration Software, you can manage the Agility database of your clients, program the Agility from your own PC by selecting the features you require from the many described in this manual. You can customize the Agility in line with the special requiremen

11、ts of the client. This can be done at the clients premises with a direct link to a laptop computer, or from a remote location via a phone connection using a modem, GSM or via IP.Agility Configuration Software also enables you to coordinate the activities of your users,as well as maintain records of

12、both users activities and customized configurations through an online status display. You can receive data from the Agility to your computer to make changes when needed and then send data from your computer to the Agility with the new set up that you have prepared.1.1 System RequirementsRecommended

13、minimum system requirements:CPU P4 3GHz or AMD 3500+RAM 2 GB Dual DDR 400 or aboveHard Disk SATA2 with 5 GB free spaceDisplay PCI Express 256MBNetwork Ethernet portOperating System Windows XP SP2 and above, Windows Vista1.2 Hardware SetupProgramming the Agility wireless security system can be done:

14、locally, remotely via modem or GSM, or via IP.1.2.1 LocalThe following diagram displays the local system connection:To establish direct cable connection from your computer to the Agility:1. Connect the RS232 cable to your computer.2. Connect the RS232 cable to the RS232 Communication Connector on th

15、e Agility.3. Power up your computer and activate the Configuration software.4. Set up the parameters for direct communication in the Configuration Software(see page 26)./Note: To enable local communication, set the Baud Rate to 38400./1.2.2 Remote PSTN ConnectionThe following diagram displays the ov

16、erall system connection to the PSTN network: To establish remote PSTN connection from your PC to the Agility:1. Connect the modem to your PC and telephone line according to the above diagram.2. Check the dial tone on your phone line.3. After hearing the dial tone, hang up and power up your computer

17、and modem and then activate the Configuration software.4. Set up the parameters for PSTN communication channel in the Configuration software (see page 27).1.2.3 Remote GSM ConnectionRemote Configuration can be performed using the GSM data channel if a GSM/GPRS module has been installed in the Agilit

18、y.The following diagram displays the overall system connection using a GSM network:To establish remote GSM connection from your PC to the Agility:1. Connect the GSM/PSTN modem to your computer. You can use a cellular phone as your computer modem.2. Power up your computer and activate the Configurati

19、on software.3. Set up the parameters for GSM communication channel in the Configuration software (see page 27).1.2.4 TCP/IP Ethernet ConnectionsThe following diagram displays the overall system connection between the Agility security panel and IP network: To establish IP network connection using the

20、 ACM:1. Connect the Agility to the Ethernet by plugging an appropriate Ethernet cableplug into the RJ45 connector on the IP module.2. Power up your computer and activate the Configuration software.3. Set up the parameters for IP communication channel in the Configuration software (see page 28).1.2.5

21、 Remote GPRS ConnectionRemote Configuration can be performed using the GPRS data channel if a GSM/GPRS module has been installed in the Agility. By sending an SMS message comprising of your Entry Host IP address and Entry Host Port number to the GSM/GPRS module in the Agility, the panel is able to c

22、onnect to your PC.The following diagram displays the overall system connection between the Agility security panel and using the GPRS module:To establish GPRS connection:1. Connect your computer to the IP network.2. Connect the Agility GPRS Module to the GSM network.3. Power up your computer and acti

23、vate the Configuration software and.4. Set up the parameters for GPRS communication channel in the Configuration software (see page 29 for more information).5. Send an SMS to the device GSM phone number containing the necessary GPRS hosting information (see page 30 step 7).1.3 Installing the Configu

24、ration Software ProgramNotes:1. Before installing the Agility Configuration Software Program make sure that Microsoft Framework 2.0 has been installed on the computer. If it has not been installed, go to the Agility Configuration Software Installation CD, in the dotnetfx folder, run the dotnetfx set

25、up application.2. For Microsoft Windows Vista users only, the User Account Control (UAC) feature must be turned off. Go to Control Panel User Accounts Turn User Account Control on or off. Uncheck the checkbox and clickOK.Installing the Agility Configuration software:1. Insert the Agility Configurati

26、on Software disc.2. In the Configuration Software folder double click on the setup.exe file. TheConfiguration Software setup wizard opens.Figure 1: Configuration Software Setup Wizard3. Click Next. The Select Installation Folder dialog box appears.Figure 2: Select Installation Folder dialog box4. Se

27、lect a location on your computer for the Agility Installation folder. The default location is C:Program FilesRISCO GroupConfiguration software.5. Select either the Everyone or Just me option to determine who can use the program on your computer and click Next. The Confirmation dialog box appears.Fig

28、ure 3: Confirmation dialog box6. Click Next to begin installation.7. Click Close when installation is complete.1.4 Initializing the System Database Initializing the system database:1. Go to Start Programs RISCO Group Configuration Software System Organizer. The System Organizer dialog box appears:Fi

29、gure 4: System Organizer dialog box2. Select Database in the System Organizer navigation tree and click the Initialize button. The Database Initialize Options dialog box appears:Figure 5: Database Initialize Options dialog box3. Click on one of the following options:a. Recreate Database to remove th

30、e current database and recreate it with default valuesb. Upgrade Database to upgrade the current database to the required versionc. Cancel select Cancel for first time installation.4. Click the Select button. When initialization has been successfully completed the status of each action should read a

31、s Done:Figure 6: Database Initialize Complete1.5 Using the Advanced Database Connection UtilityThe Advanced Database Connection Utility is used to test the database parameters when initializing of the database has failed. To test the database parameters:1. In the System Organizer select Connection f

32、rom the navigation tree. Thefollowing dialog box appears:Figure 7: Connection dialog box2. Select the location of the desired database from the Server Name dropdown list.3. Enter the Database Name: ConfigurationSoftware (default name).4. Make sure that the Use SQL Server Authentication radio button

33、is selected.5. Enter the user name: CSuser (default name) and password: Pssw0rd (default password)./Note: When testing database parameters prior to initializing the system database (see step 1.4), the default user name will be sa and the default password will be Syn0p$Y$./6. Enter a connection timeo

34、ut amount for performing a test.7. Click on the button to check the connection to the database. Whenconnection has been successful click on the button./Note: To save your database selection without testing, check the Save without testing checkboxand then click ./1.6 Setting the Software LanguageTo s

35、et the software language:1. In the System Organizer select Languages from the navigation tree. The followingdialog box appears:Figure 8: Languages dialog box2. Select the desired language from the Supported Languages dropdown list andclick the Set Language button. The following message appears:Figur

36、e 9: Languages message dialog box3. Click OK and then click Close to exit the System Organizer.1.7 Activating the Configuration Software from your DesktopLogging in to the Configuration software:8. Double click on the Configuration Software icon on your desktop to run theprogram. The Configuration S

37、oftware login dialog box appears:Figure 10: Configuration S/W login dialog box9. Enter your user name. The default user name is Admin.10. Enter your password. The default password is 123./Note: When entering your user name and password an orange line appears under the field which indicates the numbe

38、r of letters/digits you have entered. The line will stop at the maximum number to indicate that you are unable to enter further letters/digits./11. Click on the Login button to activate the program./Note: If you have previously defined only one client in the software, the program will open this clie

39、nt automatically. If you have more than one client, the program opens a Find Client dialog box with a list of all the clients. Select the relevant client from the list./Chapter 2 - Your ScreenThe configuration software window is divided into the following sections:Main Menu Tool Bar Directory (Navig

40、ation Tree Map) Client List Connection Indication Elapsed Time Fault Indication Status Indication Partition Indication Main Screen PathFigure 11: Screen Layout2.1 Main MenuThe Main Menu is divided into 4 submenus that include various system programmingoperations. For more information on each submenu

41、 refer to: Client page 20 View page 23 Communication page 23 Tools page 30 Help page 332.2 Tool BarThe icons in the toolbar provide quick access to certain operations that are found in the Main Menu.Icon Description/ Open/Close Navigation Tree (see page 17) New Client (see page 20) Find Client (see page 22) Refresh (see page 22) View Previous Screen (see page 22) Save Client (see page 22) Save Current Screen (see page 22) Send Current Screen (see page 23) Receive Current Screen (see page 24) Restore Defaults To Current Screen (see p