Workover Rig_XJ250PBrief Introduction 修井机_第1页
Workover Rig_XJ250PBrief Introduction 修井机_第2页
Workover Rig_XJ250PBrief Introduction 修井机_第3页
Workover Rig_XJ250PBrief Introduction 修井机_第4页
Workover Rig_XJ250PBrief Introduction 修井机_第5页
已阅读5页,还剩13页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、XJ250P Workover Rig修井洗井车XJ250P Workover Rig修井洗井车提纲.Main Parameters主参数. Assembling Drawing总图. Driving System传动系统.Chassis底盘总成.Drawworks绞车总成. Mud Pump泥浆泵系统. Mast井架系统. Traveling System 游动系统.Controlling System 控制系统.Instruments 仪表系统Max. Load 最大提升负荷: 540kNEngine 发动机: CATERPILLERTransmission传动箱: ALLISON液力变矩

2、器Gear shifts档 位: Five forward,one backward五正一倒自动档Driving style 驱动形式: 86Steering Style 转向方式: Hydraulic steering assistant液压助力转向(左驾驶室)Drawworks主滚筒 Input power输入功率: 250350HP Clutch离合器: ATD-224H Clutch气囊推盘式Brake drum,Dia.X Width刹车鼓直径及长度: 970mm 260mm (带式刹车) Groove绳槽: 26mm绳径的里巴斯绳槽 Crown Saver安全装置: 过卷阀防碰天车

3、 Cooling Style冷却方式: 喷水冷却 Main Parameters主参数Sandline Drum捞砂滚筒Dia.X Length捞砂滚筒直径及长度: 324mmX1016mmBrake Drum Dia.刹车鼓直径: 970mm 260mm (带式刹车)Clutch Model离合器: ATD-124H气囊推盘式Capacity容量: 14mm(9/16)1200014000ftCooling Style冷却方式: Water Spraying喷水冷却Assistant Brake辅助刹车:122 water brake水刹车(带进水阀控制器)Max.output Pressu

4、re,mud pump泥浆泵最大输出压力:13.72MPaDisplacement,mud pump泥浆泵排量:0.9m3/minMast Height井架高度:23m(两级伸缩)Working Platform简易操作平台:1.52.5m(每间隔0.25m可调)Hydraulic Rotary Table液压转盘:Bore Dia.,rotary table转盘通径:12(305mm)Continuous horsepower,rotary table转盘连续功率:150 HPMax.working speed,rotary table转盘最大工作速度:100 rpmMax.torque,r

5、otary table转盘最大工作扭矩:11000 Nm 一、Main Parameters主参数 Assembling Drawing总图1、chassis底盘总成 2、driving system传动系统 3、mud pump泥浆泵总成4、fluid manifolds高低压管汇 5、drawworks绞车总成6、power system动力系统 7、mast井架总成 8、traveling system 游动系统 9、controlling system控制系统 10、instrument仪表系统 11、Accessories and wellhead tools附件及井口工具 Driv

6、ing System传动系统Features:性能特点:1、Driving line is simple and reliable with high driving efficiency.传动链简单可靠,传动效率高;2、It has great backup power and can meet all kinds of requirements of workover services.动力储备大,能够满足修井洗井车各种作业工况要求。 Chassis底盘总成1、Specifications性能参数 Driving Style驱动型式:8X6 Suspension Style悬挂方式:spr

7、ing plates to front axles and equalizing beam to rear axles前板簧后平衡梁 Steering Style转向方式:hydraulic steering assistant液压助力2、Technical features技术特点 A、compact structure and small overall dimension with small turning and sweeping radius.结构紧凑,外形尺寸小,转弯半径及扫过半径小; B、high ground clearance with passing capacity a

8、nd cross-country capacity离地间隙大,通过性能及越野性能好; C、High torque with good gradability.传递扭矩大,爬坡性能好。 Drawworks绞车总成总图Technical features技术特点:A、compact structure,small overall dimension and light weight结构紧凑,外形尺寸小,重量轻;B、separate drawworks with stable performance绞车总成独立结构,绞车性能稳定;C、high hoisting ability and backup

9、power提升能力强,储备能力大;D、with more interchangeable parts.通用件多,互换性强。 Main Drum,drawworks绞车总成主滚筒Main 主要技术特性1.Fast line pulling force快绳拉力: 145kN 2. Main drum dia.X length滚筒绳槽直径X长度: 429mmX961mm3. Main brake style主刹车型式: belt style带刹 4. Brake drum dia.X width刹车鼓直径x宽度: 1070mmX260mm5. Wire rope dia.钢丝绳直径: 26mm 6.

10、 Brake cooling style刹车盘冷却方式: water spraying 喷水冷却 绞车总成捞砂滚筒Main technical features主要技术特性1. Fast line pulling force 快绳拉力: 115kN 2. Main drum dia.X length滚筒直径X长度: 324mmX1006mm3. Main brake style主刹车型式: belt brake 带刹 4. Brake drum dia X width刹车鼓直径x宽度: 1070mmX260mm5. Wire rope dia.钢丝绳直径: 14mm 6. Brake drum

11、 cooling style刹车鼓冷却方式: 喷水冷却 Brake system,drawworks绞车总成刹车系统Main technical features:主要技术特性1、wide wrap angle of brake belt and high brake force刹带包角大,刹车力大;2、simple structure and be easy to adjust and maintain.结构简单,维护保养及调整方便;3、more interchangeable parts通用件多。Main drum brake system主滚筒刹车系统Sandline drum brak

12、e system捞砂滚筒刹车系统 Mud pump泥浆泵系统Mud pump specifications柱塞泵技术参数1.water horsepower柱塞泵水功率: continuous持续: 150HHP (112.0kW) discontinuity 间断: 200HHP (149kW)2.stoke柱塞泵冲程: 4 101.6mm3.max. spm柱塞泵最高冲次: 350冲/min4.displacement and pressure while max. spm最高冲次时的排量与压力: 1158L/min 5.8MPa(连续) 7.7MPa(间断)5.max. working

13、pressure最高工作压力:20MPa Mast system井架系统Mast specifications井架技术参数1.front slant angle井架前倾角:4.5。 2.traveling lines游动绳系:3X4. 3.wire rope model大绳规格:26mm.4.rack platform capacity二层台立根最大容量: 2000m(27/8钻杆).)5.max. wind load without load井架空立根时最大抗风能力: 110km/h(60节).6.adjust height to working platform井口操作低平台调节高度: 12.5米. Traveling System游动系统Composition:游动系统组成1. Weight indicator指重表JZ100 2. Swivel 水龙头SL120. 3. Wire rope钢丝绳26mm.4. Elevator link吊环DH-755. Traveling block游车大钩YG706. Other accessories 其它附件 Hydra

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论