100T汽车吊性能表(共3页)

1、精选优质文档-倾情为你奉上100T主要性能与参数项 目                           数 值 最大额定总起重量                kg基本臂最大起重力矩&#

2、160;             3238kN.m 最长主臂+副臂最大起重力矩       1127kN.m主臂最大起升高度                48m         

3、        主臂+副臂最大起升高度           62.1m           外形尺寸(长×宽×高)            14550×2750×3750mm主臂长&

4、#160;                         12.8-48m  副臂长                      

5、    18.1m起重特性表 PATED LIFTING CAPACITY TABLE 单位（UNIT）：Kg工作幅度WORKINGRADIUS（m）主 臂 BOOM主臂仰角BOOM ANGLE（°）主臂+副臂 BOOM+JIB支腿全伸、后方、侧方作业REAR&SIDE WORKING AREA WITH OUTRIGGER FULLY EXTENDED45+9.5m45+16.0m臂 长 BOOM LENGTH副臂安装角JIB OFF SET副臂安装角JIB OFF SET120m162m204m270m330m390m450m5°3

6、0°5°30°3.0700008060002500400013003.59200070000580007855002400360012004.08500070000540007650002300320011504.5760006400051000350007445002200300011005.0700005800049000350007240002100270010505.563000510004500035000260007037002050250010006.05700046000430003400026000683400195024009506.54800

7、04300041000330002600020000663200190022009007.0440004000039000320002600020000642900185021008507.537000370003500030500250002000015000622400180018008008.03400034000320002900040001900015000602000175015007509.0270002700027000250002250017500150005816001500120070010.02190022000205001650015000561400135011.0

8、18400190001950018000155001400012.015700160001650016000145001360014.01280013500130001200016.08400980010500110001050018.06300780082008500900020.0600066007200750022.0500052005800620024.042004800520026.03800430028.03100360030.02900说明（NOTE）：l 以上作业工况均为支腿全伸，不允许在不打支腿的情况下吊重。（Above working condition is all wi

9、th outrigger fully extended,never lift a load on the wheels.）l 表中粗线以上数值是由起重机的结构强度所决定的，粗线以下数值是由起重机整机稳定性所决定的。(Capacities above the thick line in the table are based on the boom strength,the others,on stablitiy of the complete machine.)l 打好第五支腿时，表中数值适用于圆周360°作业。(With the 5th outrigger fully extend

10、ed,full 360rotation is available according to the values listed in the above table.)l 表中所列额定起重量为最大允许值，并包括吊钩重量（100吨吊钩重815Kg，60吨吊钩重560Kg，6吨吊钩重180Kg）和其他吊具的重量。(The rated lifting capacity listed in the table is max.allowed value,including weight of the hookblock (the hookblock weight is 815kg for 100t,56

11、0kg for 60t,180kg for 6t)and other slings.)l 表中所给幅度值，是指吊载后吊钩中心到回转中心的水平距离。(A working radius given in the table is a horizontal to the axis of the slewing ring when the hookblock is loaded.)l 当实际臂长和工作幅度在两数值之间时，应按最大臂长和幅度值确定起重量。(When actual boom length is between two values,determing lifting capacity according to bigger boom and