ML梅花形弹性联轴器

1、梅花形弹性联轴器产品说明梅花形弹性联轴器是由两个带凸爪形状相同的半联轴器和弹性元件组成,利用梅花形弹性元件置于两半联轴器凸爪之间,以实现两半联轴器的联接.具有补偿两轴相对偏移、减振、缓冲、径向尺寸小、结构简单、不用润滑、承载水平较高、维护方便等特点,但更换弹性元件时两半联轴器需沿轴向移动.适用于联接两同轴线、起动频繁、正反转变化、中低速、中小功率传动轴系、要求工作可靠性高的工作部位,不适用于重载及轴向尺寸受限制、更换弹性元件后两轴线对中困难的部位.标准修订后,梅花形弹性元件的材料有聚氨脂和铸形尼龙两种.根据不同工况条件选用不同材料,如风机、水泵、轻工、纺织等工作平稳、载荷变化不大时,可选用聚氨

2、脂.两种材料的价格相差较大ML梅花形弹性联轴器结构图、MLH-根本型根本参数和主要尺寸mmZ轴J孔轴孔配公称扭矩Tn(N.m)许用转速型号弹性件硬度n(r/min)abc>75>85>94铁钢ML11625401150015300轴孔直径d1d2合长度dzZ、JL0转动惯Y型DD1S重量Kg型max量Y型Z型'LL1J型ML2631002008200109001214328016181942100501920.0140.66202224521202022245212725286214770282.50.0751.55303282187ML390140280670090

3、00252862148853430.1782.53032353882188252862151ML4140250400550073003032353882191191105423.50.4124.34042112251ML52504007104600600030323538821971255240.736.240424511225748353835388260203ML64006301120400053004042404245485011284145654.51.852638.6ML7710112022403400ML81120180035502900ML91800280056002500554

4、54850450055454811284265170905.53.8814606365142107325505550551128427238006063652001006.59.2225.714210733470717560633300651421073342301157.518.9541.07071758085901721323949570717514210734475ML102800450090002200290080859080852601407.539.6817213240459951001102121674848085908085172132411959095ML114000630012500190025003001708.573.438710011021216749112090959095172132417ML1271001120020000160021001001101003602159178.45140212167497120125110120125130252202577100100110110212167497ML1