气瓶安全监察规程2

1、FacsimileTo: See distribution list From: Zhang Yuming Messer China Delegate OfficeFax No.Approved by: Tony RiveraSubject: Cylinders safety supervision regulation Tel &Fax No.E-mail: 86-21- 63916611*5035: 86-21- 63916860 Yuming.ZhangDate: 24 October 2001No. of pages: 3Cylinders safety supervision reg

2、ulation issued by state quality technical supervision bureau on December 31 2000 has been effective since July 1, 2001. Messer China companies should be ware of and follow these regulations. The following items are only part of the regulation.国家质量技术监督局在2000年12月31日颁发了气瓶安全监察规程。新规程自2001年7月1日开始生效。请各企业遵照

3、执行。 下面是规程中的部分条款。Item No.Subject内容Relevant item in the regulation相关条文1Cylinder management气瓶管理Clause 15 条The filling station is responsible in safe application and regular inspection of the self-owned cylinders and entrusted cylinders and setting up cylinder files. The cylinder files include certifica

4、te of soundness, certificate of product quality, records of cylinder inspection and others. The cylinder files should be kept until the cylinder is rejected as useless.气瓶的充装单位对自有气瓶和托管气瓶的安全使用以及按期检验负责，并应建立气瓶档案。气瓶档案包括：合格证、产品质量证明书、气瓶检验记录等。气瓶的档案应保存到气瓶报废为止。The filling station should report the types and q

5、uantity of self-ownedcylinders and entrusted cylinders to the organization of safety supervisionfor boiler and pressure vessel under the administration department ofquality and technology supervision at prefecture or municipal level and atthe place the station is located.气瓶充装单位应按规定向所在地地市级以上（含地市级）质量技

6、术监督行政部门锅炉压力容器安全监察机构报告自有气瓶和托管气瓶的种类和数量。Clause 16 条From the implementation date of the regulation, the property right of the new cylinder which has just put into application should be owned by the filling station. If the property right of the cylinder that has been put into application does not belong

7、to the filling station, it should be to transfer the property right to the filling station or the owner of the cylinders goes through trust formalities for the filling station.从本规定实施之日起，新投入使用的气瓶的产权应为气瓶充装单位所有。已投入使用的气瓶的产权如不属于气瓶充装单位，宜将气瓶产权转为气瓶充装单位，或者由气瓶产权人与气瓶充装单位办理托管手续。Item No.Subject内容Relevant item in

8、 the regulation相关条文1Cylinder management气瓶管理Clause 17条The cylinder must exclusively be used for a special purpose. Only the same medium as that shown by steel sealed marking could be filled. The cylinder must not be renovated for other purpose.气瓶必须专用。只允许充装与钢印标记一致的介质，不得改装使用。Clause 18 条The safety perfo

9、rmance of imported cylinder must be inspected according to the mandatory National Standard. In the inspection the key items that are in relation to safety performance of cylinder, such as ambient temperature, pressure of hydraulic test, mechanical properties of cylinder body, non-destructive test, h

10、ydraulic bursting test and various models tests, must not be less than that stipulated in the corresponding National Standards. The cylinder that has not any corresponding National Standard at the moment must be inspected in accordance with the requirements approved by the Bureau of Safety Supervisi

11、on for Boiler and Pressure Vessel. 进口气瓶的安全性能应依据强制性国家标准进行检验，其中涉及气瓶安全质量的关键项目，如：环境温度、水压试验压力、瓶体力学性能、无损检测、水压爆破试验和各项型式试验均不得低于相应国家标准的规定。暂时没有国家标准的气瓶产品，按锅炉压力容器安全监察局核准的要求检验。Clause 19 条On each imported cylinders that have passed the inspection, steel sealed marking is pressed and color code of inspection is pa

12、inted one by one by inspector. The color, characters and color code on surface of the cylinder should be in accord with the requirements of the National Standard GB 7444 Colored cylinder Mark for gases .进口气瓶检验合格后，由检验单位逐只打检验钢印，涂检验 色标。气瓶表面的颜色、字样和色环应符合国家标准GB 7144 气瓶颜色标记的规定。Item No.Subject内容Relevant ite

13、m in the regulation相关条文2Cylinder color and labeling气瓶颜色和标签Clause 13 条 The color, characters and color circle on external surface of cylinder must be in accord with the stipulations of GB 7144 Colored cylinder Mark for gases , and there must be obvious characters to indicate the cylinder owner and fi

14、lling station. 气瓶外表面的颜色、字样和色环，必须符合GB 7144 气瓶颜色标记的规定，并在瓶体上以明显字样注明产权单位和充装单位。If the gas or mixture which has not listed in the National Standard is filled in cylinder, the color, characters and color circle on external surface of the cylinder must be in accord with the scheme approved by the Bureau of

15、Safety Supervision for Boiler and Pressure Vessel.盛装未列入国家标准规定的气体和混合气体的气瓶，其外表面的颜色、字样和色环均须符合锅炉压力容器安全监察局核准的方案Clause 14 条The pattern, manufacture method and application of warning label of cylinder should be in accord with the stipulations of GB 16084 Precautionary labels for gas cylinders.气瓶警示标签的式样、制作方

16、法及应用应符合GB 16804 气瓶警示标签的规定。3Cylinders regular inspection气瓶检验Clause 69 条The inspection periods of various kinds of cylinders must not exceed the following stipulated terms 各类气瓶的检验周期，不得超过下列规定:1. The cylinder filled with corrosive gas, diving cylinder and cylinder that often contact with seawater must have once inspection in every two years. 盛装腐蚀性气体的气瓶、潜水气瓶以及常与海水接触的气瓶每二年检验一次2. The cylinder filled with general gas must have once inspection in every three years. 盛装一般性气体的气瓶，每三年检验