国外主要无损检测标准含中英文名称对照

1、ASTM A 754/A 754M-1996X 射线荧光法测量涂层厚度的试验方法Test Method for Coating Thickness by X-Ray FluorescenceASTM B567-1998用B射线背散射法测量涂层厚度的试验方法Test Method for Measurement of Coating Thickness by the Beta Backscatter MethodASTM B568-1998 x射线光谱仪法测量涂层厚度的试验方法Test Method for Measurement of Coating Thickness by X-Ray Sp

2、ectrometryASTM C637-1998 辐射屏蔽混凝土用集料的标准规范Standard Specification for Aggregates for Radiation-Shielding ConcreteASTM C638-1992 辐射屏蔽混凝土集料组分的描述术语Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding ConcreteASTM C1455-2000用丫射线谱法无损检定仍然有效特殊核材料指南ASTM D2599-1987X 射线光谱法测定汽油含铅量的试验方法 (

3、05.02)Test Method for Lead in Gasoline by X-Ray Spectrometry (05.02)ASTM D4294-1998用非色散X射线荧光光谱法测定石油产品中含硫量试验方法Sulfur in Petroleum Products by Non-Dispersive X-Ray Fluorescence Spectrometry, Method of Test for (05.02)ASTM D4452-1985 土壤样品的 X 射线照相法 X-Ray Radiogra phy of Soil Sam piesASTM D5059-1998X-射线光

4、谱法测定汽油含铅量的试验方法Test Method for Lead in Gasoline by X-Ray Spectroscopy (05.03)ASTM D5187-1991X射线衍射法测定煅烧石油焦炭中结晶尺寸(LC)的试验方法Test Method for Crystallite Size (LC) of Calcined Petroleum Coke by X-Ray Diffraction (05.03)ASTM D6247-1998X射线荧光光谱法分析聚烯烃中元素含量的试验方法Test Method for Analysis of Elemental Content in P

5、olyolefins by X-Ray Fluorescence SpectrometryASTM E94-2004(2010)射线照相检验标准指南Sta ndard Guide for Radiogra phic Exami natio nASTM E142-1996 射线照相检测的质量控制方法Method for Controlling Quality of RadiographicTestingASTM E155-2010 铝镁合金铸件射线照相检验标准参考照片Standard Reference Radiographs for Inspection of Aluminum and Mag

6、nesium CastingsASTM E170-1999 有关辐射测量和剂量测定的术语ASTM E181-1998放射性核素探测器的校准和分析的一般方法General Methods for Detector Calibration and Analysis of RadionuclidesASTM E186-2010厚壁(50.8-114mm)钢铸件标准参考射线照片Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-In./50.8 to 114-mm) Steel CastingsASTM E192-2004(2010)

7、e1 宇航用熔模钢铸件标准参考射线照片Standard Reference Radiographs for Investment Steel Castings of Aerospace ApplicationsASTM E242-2001(2010)某些参数改变时射线照相图象显示的标准参考射线照片Standard Reference Radiographs for Appearances of Radiographic Images asCertain Parameters Are ChangedASTM E272-201 0高强度铜基及镍铜合金铸件的标准参考射线照片Standard Refe

8、rence Radiographs for High-Strength Copper-Base andNickel-Copper Alloy CastingsASTM E280-2010厚壁(114-305mm)铸钢件标准参考射线照片Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to305-mm) Steel CastingsASTM E310-2010 锡青铜铸件标准参考射线照片Standard Reference Radiographs for Tin Bronze CastingsASTM E3

9、90-2011 钢熔焊焊缝标准参考射线照片Standard Reference Radiographs for Steel Fusion WeldsASTM E431-96(2011)半导体和相关器件射线照片判读指南Standard Guide to Interpretation of Radiographs of Semiconductors andRelated DevicesASTM E446-2010厚度至50.8mm钢铸件的标准参考射线照片Standard Reference Radiographs for Steel Castings up to 2 in. (50.8 mm) i

10、nThicknessASTM E505-2001 (201 1)铝和镁压铸件检验的标准参考射线照片Standard Reference Radiographs for Inspection of Aluminum and MagnesiumDie CastingsASTM E545-2005(201 0)确定直接热中子射线照相检验成象质量的标准试验方法Standard Test Method for Determining Image Quality in Direct ThermalNeutron Radiographic ExaminationASTM E586-88 丫与x射线照相检测的

11、术语定义ASTM E592-1999(2009)e1651mm厚钢板X射线照相检验和 25152mm厚钢板钻60照相检验 获得 ASTM 当量穿透灵敏度的标准指南Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60ASTM E665-1994测量暴露在 X闪光

12、射线机的X射线照射下的材料中相对深度的吸收剂量Determining Absorbed Dose Versus Depth in Materials Exposed to the X-RayOutput of Flash X-Ray MachinesASTM E666-1997 丫或 X 射线剂量吸收的计算Calculating Absorbed Dose from Gamma or XRadiationASTM E689-2010球墨铸铁标准参考射线照片Standard Reference Radiographs for Ductile Iron Castings标准方法ASTM E746-

13、2007 测定工业射线照相成像系统相关图象质量响应的Standard Practice for Determining Relative Image Quality Response ofIndustrial Radiographic Imaging SystemsASTM E747-2004(2010)射线照相用线型象质计(IQI)的设计、制造及材料组分类的标准方法Standard Practice for Design, Manufacture, and Material Grouping Classification of Wire Image Quality Indicators (I

14、qi) Used for RadiologyASTM E748-2002(2008)材料热中子射线照相标准方法Standard Practices for Thermal Neutron Radiography of MaterialsASTM E801 -2006(201 1 )电子装置射线照相检验的质量控制标准方法Standard Practice for Controlling Quality of Radiological Examination of Electronic DevicesASTM E802-1995(2010)厚度至114mm的灰口铸铁标准参考射线照片Standard

15、 Reference Radiographs for Gray Iron Castings up to 4 1/2 in. (114 mm) in ThicknessASTM E803-1991(2008) 确定中子射线透照束长径比的标准方法Standard Method for Determining the L/D Ratio of Neutron Radiography BeamsASTM E915-1996 残余应力测量用 X 射线衍射仪校准检定的试验方法Test Method for Verifying the Alignment of X-Ray DiffractionInstru

16、mentation for Residual Stress MeasurementASTM E999-2010 工业射线照相胶片处理的质量控制标准指南Standard Guide for Controlling the Quality of Industrial Radiographic Film ProcessingASTM E1000-98(2009) 射线照相检测标准指南Standard Guide for RadioscopyASTM E1025-2011 射线照相检测用孔型象质计设计、制造和材料组分类的标准方法Standard Practice for Design, Manufac

17、ture, and Material GroupingClassification of Hole-Type Image Quality Indicators(IQI) Used forRadiographyASTM E1030-2005(2011) 金属铸件射线照相检验的标准试验方法Standard Test Method for Radiographic Examination of Metallic CastingsASTM E1032-2012 焊缝射线照相检验的标准试验方法Standard Test Method for Radiographic Examination of Wel

18、dments ASTM E1079-2010 透射密度计校准的标准方法Standard Practice for Calibration of Transmission DensitometersASTM E1114-2009e1 测定铱 192 工业射线照相源尺寸的标准试验方法 Standard Test Method for Determining the Size of Iridium -192 Industrial Radiopraphic SourcesASTM E1161-2009 半导体和电子元件射线检验的标准方法Standard Practice for Radiologic

19、Examination of Semiconductors andElectronic ComponentsASTM E1165-2004(2010)用针孔成象法测量工业X射线管焦点的标准试验方法Standard Test Method for Measurement of Focal Spots of Industrial X-RayTubes by Pinhole ImagingASTM E1168-1995 核设施工人辐射防护训练 Radiological Protection Training for Nuclear Facility WorkersASTM E1254-2008 射线

20、照片及未曝光工业射线照相胶片储藏的标准指南Standard Guide for Storage of Radiographs and Unexposed IndustrialRadiographic FilmsASTM E1255-2009 射线透视检验标准方法Standard Practice for RadioscopyASTM E1320-2010钛铸件标准参考射线照片Standard Reference Radiographs for Titanium CastingsASTM E1390-2012工业射线照相观片灯标准规范Standard Specification for Illu

21、minators Used for Viewing IndustrialRadiographs规程ASTM E1400-1995高剂量辐射量测定校准实验室的特性和性能Characterization and Performance of a High-Dose Radiation DosimetryCalibration Laboratory, Practice for (12.02)ASTM E1411-2009射线照相系统鉴定的标准方法Standard Practice for Qualification of Radioscopic SystemsASTM E1416-2009 焊缝射线

22、检验的标准试验方法Standard Test Method for RadioscopicExamination of WeldmentsASTM E1441-2011计算机层析(CT成像的标准指南Standard Guide for Computed Tomography (CT) ImagingASTM E1441-2000 计算机层析成像(CT)指南 Guide for Computed Tomography (CT) ImagingASTM E1453-2009 含模拟或数字射线照相数据的磁带媒体存储标准指南Standard Guide for Storage of Magnetic

23、Tape Media that Contains Analog orDigital Radioscopic DataASTM E1 475-2002(2008)数字射线照相检验数据计算机化传输的数据区标准指南Standard Guide for Data Fields for Computerized Transfer of DigitalRadiological Examination DataASTM E1496-2005(2010)中子射线照相尺寸测量的标准试验方法Standard Test Method for Neutron Radiographic DimensionalMeasu

24、rements(With drawn 2012)ASTM E1570-2011计算机层析(CT)检验标准方法Standard Practice for Computed Tomographic (CT) ExaminationASTM E1647-2009确定射线照相检测对比度灵敏度的标准方法Standard Practice for Determining Contrast Sensitivity in RadiologyASTM E1 648-1 995(201 1 )铝熔焊焊缝检验标准参考射线照片Standard Reference Radiographs for Examination

25、 of Aluminum Fusion WeldsASTM E1672-2006选择计算机层析(CT)系统的标准指南Standard Guide for Computed Tomography (Ct) System SelectionASTM E1695-1995(2006)e1计算机层析(CT)系统性能测量的标准试验方法Standard Test Method for Measurement of Computed Tomography (Ct) SystemPerformanceASTM E1734-2009铸件射线照相检验标准方法Standard Practice for Radios

26、copic Examination of CastingsASTM E1735-2007确定经4-25MV X射线曝光的工业射线胶片相关成像质量的标准试验方法Standard Test Method for Determining Relative Image Quality of IndustrialRadiographic Film Exposed to X-Radiation from 4 to 25 MVASTM E1742/E1742M-2011 射线照相检验标准方法Standard Practice for Radiographic ExaminationASTM E1814-19

27、96(2007)铸件计算机层析(CT)检验标准方法Standard Practice for Computed Tomographic (CT) Examination of CastingsASTM E1815-2008工业射线照相胶片系统分类的标准试验方法Standard Test Method for Classification of Film Systems for IndustrialRadiographyASTM E1817-2008使用典型象质计(RQIs)控制射线检验质量的标准方法Standard Practice for Controlling Quality of Rad

28、iological Examination byUsing Representative Quality Indicators(RQI-s)ASTM E1894-1997选择脉冲X射线源用的剂量测定系统的标准指南Standard Guide for Selecting Dosimetry Systems for Application in PulsedX-Ray SourcesASTM E1931-2009X射线康普顿散射层析技术标准指南Standard Guide for X-ray Compton Scatter TomographyASTM E1935-1997(2008)校准和测量计

29、算机层析(CT)密度的标准试验方法Standard Test Method for Calibrating and Meausring CT DensityASTM E1936-2003(2011)评估射线照相数字化系统性能的标准参考射线照片Standard Reference Radiograph for Evaluating the Performance ofRadiographic Digitization SystemsASTM E1955-2004(2009)与美国材料与试验协会ASTM E 390参考射线照片等级比较钢中焊缝完善性的标准射线检验Standard Radiograp

30、hic Examination for Soundness of Welds in Steel byComparison to Graded ASTM E390 Reference RadiographsASTM E2002-1998(2009)测定射线照相图象总不清晰度的标准方法Standard Practice for Determining Total Image Unsharpness in RadiologyASTM E2003-2010中子射线照相波束纯度指示计制作的标准方法Standard Practice for Fabrication of the Neutron Radio

31、graphic Beam PurityIndicators MetricASTM E2007-2010计算机射线照相标准指南(用于CR的标准指南)(可激射线发光PSL法)Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL)Method)ASTM E2023-2010制作中子射线照相灵敏度指示计的标准方法Standard Practice for Fabrication of Neutron Radiographic SensitivityIndicatorASTM E2033-1999(2006)计算

32、机射线照相的标准方法(用于CR的标准实施方法)(可激射线发光PSL法)Standard Practice for Computed Radiology (Photostimulable Luminescence Method)ASTM E2104-2009 优质航空与涡轮材料和构件射线照相检验的标准方法Standard Practice for Radiographic Examination of Advanced Aero andTurbine Materials and ComponentsASTM E2120-2000便携式X射线荧光光谱仪测量涂膜中铅含量的性能评估规程Practice

33、 for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint FilmsASTM E2339-2004 无损评价中的数字成像和通讯Digital Imaging and Communication in NDE （ DICONDE）ASTM E2422-2011 铝铸件标准参考数字射线图像（钛和钢铸件也适用）Standard Digital Reference Images for Al. Casting(Titanium

34、& steel Casting also available)（用于CR系统的质ASTM E2445-2005(2010)计算机射线照相系统的长期稳定性与鉴定的标准方法 量认定和长期稳定性的标准实施方法)Standard Practice for Qualification and Long-Term Stability of Computed Radiology SystemsASTM E2446-2005(2010)计算机射线照相系统分类的标准方法(用于CR系统分类的标准实施方法)Standard Practice for Classification of Computed Ra

35、diology SystemsASTM E2597-2007e1 数字探测器阵列制造特性的标准规程Standard Practice for Manufacturing Characterization of Digital Detector ArraysASTM E2660-2011 航空用优质钢铸件标准参考数字射线图像Standard Digital Reference Images for Investment Steel Castings forAerospace ApplicationsASTM E2662-2009 航空用平面与夹芯复合材料射线照相检验的标准方法Standard P

36、ractice for Radiologic Examination of Flat Panel Composites andSandwich Core Materials Used in Aerospace ApplicationsDICONDE）的标准ASTM E2669-2011数字射线照相(DR)检测方法的数字图像与通信无损评价( 方法Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Te

37、st Methods ASTM E2698-2010 使用数字探测器阵列的射线照相检验标准方法Standard Practice for Radiological Examination Using Digital Detector ArraysASTM E2736-2010 数字探测器阵列射线照相检测标准指南Standard Guide for Digital Detector Array RadiologyASTM E2737-2010 评价数字探测器阵列性能和长期稳定性的标准方法Standard Practice for Digital Detector Array Performanc

38、e Evaluation andLong-Term StabilityDICONDE)DICONDE)ASTM E2738-2011使用计算机射线照相(CR检测方法的数字图像与通讯无损评价( 的标准方法Standard Practice for Digital Imaging and Communication NondestructiveEvaluation (DICONDE) for Computed Radiography (CR) Test MethodsASTM E2767-2011使用X射线计算机层析(CT)检测方法的数字图像与通讯无损评价 的标准方法Standard Practi

39、ce for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods ASTM E2861-2011 测量中子辐射束发散与校准的标准试验方法Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams(F-4)ASTM F629-1997 铸造金属外科手术植入物射线照相检查实施方

40、法ASTM F727-1981 透明照相干版透光度测量的试验方法Test Method for Measuring Transmittance of See-Through PhotoplateASTM F784-1982 校准放射性同位素密封测试仪的试验方法Test Method for Calibrating Radioisotope Hermetic Test ApparatusASTM F864-1984 硬表面玻璃照相干板的检验 Inspection of Hard-Surface Glass PhotoplatesASTM F947-1985测定照相胶片低能级X射线辐射灵敏度的试验

41、方法Test Method for Determining Low-Level X-Radiation Sensitivity ofPhotographic FilmsASTM F1035-1991使用橡胶帘布圆盘验证轮胎X射线成象系统的辩别能力Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of aTire X-Ray Imaging SystemASTM F1039-1987X射线安全屏系统中测量低剂量X辐射的试验方法Test Method for Measurement of Low Level

42、X-Radiation Used in X-RaySecurity Screening SystemsASTM F1467-1999微电子装置电离辐射效应中X射线测试仪(近似等于lOkeV辐射量子)的使用Use of an X-Ray Tester (is Approximately Equal to 10 keV Photons) inIonizing Radiation Effects Testing of Microelectronic DevicesASTM PS95-1998便携式X射线荧光(XRF装置现场测定涂料或其它涂层含铅量的质量体系的标准 临时操作规程Standard Pro

43、visional Practice for Quality Systems for Conducting In SituMeasurements of Lead Content in Paint or Other Coatings usingField-Portable X-Ray Fluorescence (XRF) DevicesASTM PS 116-1999测量涂膜含铅量用的便携式X射线荧光光谱仪性能评价的临时操作规程Provisional Practice for the Performance Evaluation of the Portable X-RayFluorescence

44、 Spectrometer for the Measurement of Lead in Paint FilmsFactorsANSI/IEEE 309-1970盖革 -弥勒计数器的试验程序Geiger-Muller Counters, Test Procedure forANSI IT9.2-1991 成象介质 -已处理的照相胶片、平板和相纸-归档盒及储存箱Imaging Media - Photographic Processed Films, Plates and Papers - FilingEnclosures and Storage ContainersANSI IT9.8-198

45、9 成象介质 -照相胶片耐折强度的测定Imaging Media - Photographic Film - Determination of Folding EnduranceANSI N13.2-1969 辐射监测的管理规程指南 Administrative Practices in RadiationMonitoring, Guide toANSI N13.5-1972直读和非直读式袖珍X和丫射线辐射剂量仪的性能Direct Reading and Indirect Reading Pocket Dosimeters for X- and GammaRadiation, Performa

46、nceANSI N13.7-1983辐射防护 照相胶片剂量仪性能标准Radiation Protection - Photographic Film Dosimeters - Criteria forPerformanceANSI N13.11-2001 个人剂量测定的试验标准 Personnel Dosimetry Performance, Criteria for TestingANSI N13.27-1981 袖珍式报警辐射剂量仪和报警记数率计的性能要求Performance Requirements for Pocket-Sized Alarm Dosimeters and Alarm

47、 RatemetersANSI N15.36-1994 核材料 无损化验测量的控制和保证Nuclear materials - Nondestructive assay measurement control and assuranceANSI N15.37-1981 核材料控制的自动无损化验系统指南Automation of Nondestructive Assay Systems for Nuclear Materials Control, Guide toANSI N42.16-1986 用于液体闪烁计数器的密封放射检查源的规范Specifications for sealed radioactive check sources used in liquid-scintillation countersANSI N42.20-1995 个人辐射监视仪的性能标准 Performance criteria for active pers