版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、工人英文自我评价和总结工人的不断学习就是收获知识一点一点进步的过程,而自我评价就是让自己看清楚自己,但是英文版自我评价要怎么写呢?下面是WTT为大家带来的范文,相信对你会有帮助的。工人英文自我评价总结篇一Through their own continuous efforts, whether ideological, learning or work, have made considerable development and tremendous gains.Through this year's work and study, I realized that the g
2、rowth of a qualified technician is a bright future, full of hope and at the same time need to pay effort and effort of the process, but also a need to constantly improve the continuous development of long-term process.The following is a summary of my work in this year and self-identification:First,
3、self-discipline, and consciously strengthen party spirit, political and ideological awareness has been improvedThought is the guide to action, a person if you want to do a good job, we must first establish their own work thinking.As a non-party member, I actively asked to join the party organization
4、, in August 2021 turned over to join the party application, is now a party activists.In my daily work, I have strict demands on myself, consciously accepting the supervision and assistance of Party members and colleagues, persistently overe my own shortings and make up for my own shortings.Always ad
5、here to the Mar_ist-Leninist position, viewpoint and methodology, adhere to the correct world outlook, outlook on life, values, and to guide their own learning, work and life practice.As a member of the pany, I seriously study and perate the pany's mainstream cultural thinking, the pany&
6、#39;s core business philosophy, and actively promote the party spirit, And apply it to the actual work, consistent with the pany.Second, thirst for knowledge, with an open mind to learnAs the 2021 session of a new employee, and only continue to upgrade their knowledge and technical level, in order t
7、o better plete their work.Work encountered problems do not understand, the humbly to the master and other colleagues for advice.Daily work in the operating area in the morning software work in the afternoon into the scene to see more of the equipment to see more and more, and constantly increase the
8、ir own on-site e_perience.At the same time a serious study of the pany's various documents on the management system and norms have a certain understanding of the work of the pany to standardize the management of the standard to strict demands on themselves.Third, work hard, conscientiously p
9、lete the work tasksI start from doing my own work and daily work, starting from me, from now on, I have always believed that a hard work, a harvest, so I have been working hard to continuously study and work hard.From the small things around and perseverance, love their own work to be able to take s
10、eriously each and every job, work, on time, effective use of working hours, stick to their posts.Equipment failure repair, no matter when they can do the first time to the field attendant operations, and put forward their own programs involved in repair, to ensure the normal operation of equipment a
11、s soon as possible.In February, 20_, I was employed as a field engineer in the work area.I followed the pace of the pany to strengthen the study of theoretical knowledge, and strive to achieve a new understanding of the use of a new harvest to achieve the theory to guide practice., To promote the wo
12、rk and improve the level of the purpose of the work, and constantly improve their technical level to guide their work.Through the dedication in their own work, tirelessly to make achievements, I want to constantly improve their job skills, and strive to master their job knowledge, to do their own wo
13、rk and the backbone of the e_perts, down to earth to do their jobs.Fourth, work to promote team spirit, to overe the work of one after another problemIn the usual work, first of all do the daily work, I and other colleagues in the work area both division of labor and cooperation, insist on regular a
14、nd other technical personnel e_changes, and fully carry forward the democracy, never arbitrary, and thus a more successful pletion of the maintenance department The work tasks.Have made great progress.Of course, the results represent the past, in the future work, I will redouble our efforts to striv
15、e to do better.Because the technology continues to progress and update, only through continuous learning, down-to-earth style, can be petent for their jobs.At the same time in the accumulation of future work e_perience, and gradually develop their own predictability, and constantly in the on-site in
16、spection, supervision at any time to identify problems and solve problems, so that their integrated processing capacity of the site continue to e_ercise and improve.工人英文自我评价总结篇二In the past five months, under the leadership of the Department of Engineering Services, and colleagues through the mon str
17、uggle, after their own positive efforts to do the following work.one.Work attitude, ideological work.Work attitude, I love my job very much, to be strict with oneself, to abide by the Engineering Department of the system, to maintain a responsible attitude to work, humility, learning, proactive, and
18、 constantly improve their technological level, and strive to lead the assignment of each task Do the best.Guide the installation work.two.Guide the installation work.In Jinli permanent mag installation bat work, through the equipment of the pipeline interface, rectifier cabis and control cabi wiring
19、 wire-line installation, deepened my understanding of the equipment process and line power supply and distribution.But also trained me to understand the electrical wiring schematic, the ability to connect pipe installation drawings.But also to learn the skills of cognitive equipment spare parts.Ever
20、y step of the installation process is done carefully.Found that the installation of lye filter timely and correct installation.Although the smooth pletion of the guidance, but through the work found in the control cabi in the PLC model configuration and accessories detailed name, the role of functio
21、nal understanding is not deep enough.The future focus on some technical drawings, working hours to the material security department cognitive accessories.Do not understand the issue of timely advice to colleagues and leaders.Equipment testing and debugging work.Third, equipment testing and debugging
22、 work.In the workshop on the Saudi equipment debugging test, the power plant CNDQ-10 hydrogen production equipment startup sequence, PID parameter settings, have a certain understanding.But also on the working principle of rectification from shallow to deep understanding.Before the test to determine
23、 through-cylinder is 90 degrees, tee 180 degrees.Through ball valve modulation off.Jordan's pneumatic film regulating valve should do its initial adjustment, debugging process, such as equipment can not reach the system pressure, the actual level does not match with the host puter, pump dama
24、ge has occurred, should be based on the actual situation of correct investigation.Fourth, the future direction of work.Ne_t month focused on the debugging phase of learning.Develop their own ability to find fault.The scene found the problem back to the leadership, more advice.In the future work to m
25、ake up for deficiencies, work hard to do better.工人英文自我评价总结篇三In July 2021, I joined Baosteel Group BaGang Co., Ltd., and in the past year and a half I have been enthusiastic about my work, I have been strict with myself and my work position.I always keep my “modest”, “prudent”The attitude of leadersh
26、ip in the cultivation of care and the help of colleagues to support, and always diligent study, proactive, and strive to improve themselves, and always work hard and earnestly plete the task, perform good job duties, outstanding performance in all aspects, has been the leadership and colleagues We a
27、re sure.Through their own continuous efforts, whether ideological, learning or work, have made considerable development and tremendous gains.Through this year's work and study, I realized that the growth of a qualified technician is a bright future, full of hope and at the same time need to
28、pay effort and effort of the process, but also a need to constantly improve the continuous development of long-term process.The following is a summary of my work in this year and self-identification:First, self-discipline, and consciously strengthen party spirit, political and ideological awareness
29、has been improvedThought is the guide to action, a person if you want to do a good job, we must first establish their own work thinking.As a non-party member, I actively asked to join the party organization, in August 2021 turned over to join the party application, is now a party activists.In my dai
30、ly work, I have strict demands on myself, consciously accepting the supervision and assistance of Party members and colleagues, persistently overe my own shortings and make up for my own shortings.Always adhere to the Mar_ist-Leninist position, viewpoint and methodology, adhere to the correct world
31、outlook, outlook on life, values, and to guide their own learning, work and life practice.As a member of the pany, I seriously study and perate the pany's mainstream cultural thinking, the pany's core business philosophy, and actively promote the party spirit, And apply it to the act
32、ual work, consistent with the pany.Second, thirst for knowledge, with an open mind to learnAs the 2021 session of a new employee, and only continue to upgrade their knowledge and technical level, in order to better plete their work.Work encountered problems do not understand, the humbly to the maste
33、r and other colleagues for advice.Daily work in the operating area in the morning software work in the afternoon into the scene to see more of the equipment to see more and more, and constantly increase their own on-site e_perience.At the same time a serious study of the pany's various docum
34、ents on the management system and norms have a certain understanding of the work of the pany to standardize the management of the standard to strict demands on themselves.Third, work hard, conscientiously plete the work tasksI start from doing my own work and daily work, starting from me, from now o
35、n, I have always believed that a hard work, a harvest, so I have been working hard to continuously study and work hard.From the small things around and perseverance, love their own work to be able to take seriously each and every job, work, on time, effective use of working hours, stick to their pos
36、ts.Equipment failure repair, no matter when they can do the first time to the field attendant operations, and put forward their own programs involved in repair, to ensure the normal operation of equipment as soon as possible.In February, 20_, I was employed as a field engineer in the work area.I fol
37、lowed the pace of the pany to strengthen the study of theoretical knowledge, and strive to achieve a new understanding of the use of a new harvest to achieve the theory to guide practice., To promote the work and improve the level of the purpose of the work, and constantly improve their technical le
38、vel to guide their work.Through the theoretical study summary in the classroom, bined with practical problems in the work, “120T converter 9.1 meters platform operating instructions” were modified, and verify the operating standards have been prepared to apply the applicable standards have been revi
39、sed, and the monthly new 2 standard operating standards to improve the standardization of operations.Through the dedication in their own work, tirelessly to make achievements, I want to constantly improve their job skills, and strive to master their job knowledge, to do their own work and the backbo
40、ne of the e_perts, down to earth to do their jobs.Fourth, work to promote team spirit, to overe the work of one after another problemIn the usual work, first of all do the daily work, I and other colleagues in the work area both division of labor and cooperation, insist on regular and other technica
41、l personnel e_changes, and fully carry forward the democracy, never arbitrary, and thus a more successful pletion of the maintenance department The work tasks.In the first quarter of 20_, with the strong support from colleagues and leaders in the operation area, I successfully pleted the QC data release of the “Electrolyte Push-Pull Flap Valve Material Solution for Alloy Feeding Bin” The Ma
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2024-2030年电磁辐射探测器行业市场现状供需分析及重点企业投资评估规划分析研究报告
- 2024-2030年电子信息材料行业市场发展分析及发展前景与投资机会研究报告
- 2024-2030年电动缝纫机行业市场现状供需分析及投资评估规划分析研究报告
- 2024-2030年电动摩托车产品入市调查研究报告
- 2024-2030年生物化工行业市场深度分析及前景趋势及投资战略研究报告
- 2024-2030年瓶装饮料行业市场现状供需分析及投资评估规划分析研究报告
- 2024-2030年玻璃板行业市场现状供需分析及投资评估规划分析研究报告
- 2024-2030年牛饲料和饲料添加剂行业市场现状供需分析及投资评估规划分析研究报告
- 2024-2030年牙科麻醉输送系统行业市场现状供需分析及投资评估规划分析研究报告
- 2024-2030年牙感染治疗行业市场现状供需分析及投资评估规划分析研究报告
- 高考化学大一轮复习 氯、溴、碘及其化合物
- EPC项目工程移交组织与配合
- 2024年山东临沂市财金投资集团有限公司招聘笔试参考题库含答案解析
- 变频柜安装施工方案
- 应急救灾物资采购投标方案(技术方案)
- 煤矿青安岗季度工作总结
- 哈利波特与死亡圣器
- 头疗销售服务培训课件
- 猪料猪料简介演示
- 数字经济与数字金融的发展
- 浴场接待服务流程
评论
0/150
提交评论