CF8M渗透检测报告

1、绍兴万龙精密机械制造有限公司SHAOXING WANLONG PRECISE MACHINERY MANUFCATURE CO丄TD渗透检验报告Liquid Pen etra nt Exam in ati onReport编号NO:产品名称Item阀体图号/修改号DWG NO/REV探伤时机FAB Stage焊后检验部位Locatio n工件规格Dime nsio nS42-16 材料牌号MaterialASTMA351 CF8M检验比例Ratio of Test100%验收标准Accep. STDSE-165工艺规程号ProcedureWLFQS707检验部位温度Temp. Of Part实

2、际温度I .检验条件 Test Condition设备型号Equipme nt根据型号试块型号Test blockB型表面状况Surface合格检验方法Method渗透齐UPen etra ntHD-RS清洗齐UClea nerHD-BX显像齐UDeveloperHD-XS施加方法Applicati on喷涂渗透时间Dwell time10mi n显像时间Dev. time15mi n观察条件1000LXVisible Con diti onn .检验记录 Test Record部件名称Part Name部件编号Part Np.数量Quan tity焊缝号Seam No.缺陷位置Positi

3、on of defectXYS42-16 阀体4211见示意图见示意图X:离左端的距离(The distanee from left end)Y:离焊缝中心的距离(The distanee from center line of seam)川.检验结论Test Result该部位没有超标缺陷显示操作者Operator级另ULevel日期Date审核者Reviewer级另ULevel日期Date日期Date渗透检验工艺卡Liquid Pen etra nt Exam in ati on In structio n工艺卡号PTI No./Rev.工艺规程号PROC NO/ Rev.页 PAGEof

4、产品名称PROD NAME验收标准ACCEP. STD部件名称PART NAME部件图号PARTDWG. NO.材料和类型MATERIAL ANDTYPE规格DIMENSION检验阶段TEST STAGE坡口形式GROOVE TYPE焊接方式WELDING PROC铸件Cast1.检验准备 TEST PREPARE渗透剂PENETRANT清洗剂REMOVER显象剂DEVELOPER检验方法TEST METHOD施加方法APPLICATION清洗方法CLEANING试块型号TEST BLOCK检验部位TEST AREA2.检验工艺参数 TEST DETAIL渗透时间PENETRNT TIME显象时间DEVELOP TIME检验部位温度TEMP OF PART检验条件NSPECTION CONDITION3 .检验示意图SKETCH OF EXAMINED AREA备注REMARK编制PREPARE日期批准DATEAPPROVE日期