r5 1 02mr5 1 02m_olt_ern_W

1、All rights reserved. Passing on and copying of this document, use and communication of its contentsnot permitted without written authorization from Alcatel.R5.1.02m7302 ISAM7330 ISAM FTTN7360 ISAM FX7356 ISAM FTTB REM7357 ISAM FTTB SEM7363 ISAM MX7367 ISAM SXVoice Package Emergency Fix Release Note3

2、FE-68884-AACP-FMZZA / Edition 02 RL - 14/Mar/20162/25All rights reserved. Passing on and copying of this document, use and communication of its contentsnot permitted without written authorization from Alcatel.StatusTitleEmergency Fix Release NoteAll rights reserved. Passing on and copying of this do

3、cument, use and communication of its contents not permitted without written authorization from Alcatel.ContentsAll rights reserved. Passing on and copying of this document, use and communication of its contentsnot permitted without written authorization from Alcatel.About this Document41 Content of

4、the Emergency Fix Release51.1 Release R5.1.02m Corrections51.2 Release R5.1.02l Features / Corrections61.3 Release R5.1.02h Corrections/ Improvements121.4 Release R5.1.02f Corrections/Improvements151.5 Known restrictions202 NAOS items and XDSL Proxies212.1 Proxies updated in R5.1.02m212.2 Proxies up

5、dated in R5.1.02l212.3 Proxies updated in R5.1.02h212.4 Proxies updated in R5.1.02f213 Prerequisites224 Documentation Base Information235 Delivery Information246 Installation Guide253FE-68884-AACP-FMZZA / Edition 02 RL - 14/Mar/20163/25About this DocumentThis document provides information on content

6、 and installation of the emergency fix release R5.1.02mISAM R.7ISAM OFLMT R.7 SHUB OFLMT V1.73.0Push-Button migration SW V3.2.35Please read this entire document before installing this emergency fix release.This emergency fix release contains only the software changes necessary to deliv

7、er a short term solution for a blocking field problem. When the fix becomes available in a regular maintenance release, the customer should move as soon as possible to this maintenance release.This release note only refers to the changes included in this emergency fix release. For information on con

8、tent and installation of the prerequisite base release, refer to the release note of that release namely:3FE-68884-AACN-FMZZAISAM 5.1.02l Emergency Fix Release Note3FE-68884-AACP-FMZZA / Edition 02 RL - 14/Mar/20164/251 Content of the Emergency Fix Release1.1 Release R5.1.02m CorrectionsFollowing fi

9、xes have been included in R5.1.02mALU02167587 After software upgrading from R4.5.03d to R5.1.02h, the NALT-E card rebooted continuouslyProblemAfter migrating from R4.5.03d to R5.1.02h, NALT-E board rebooted continuously.ALU02149457 ISAM 7330 crash after configuration mode no NT-B slot via AMSProblem

10、ISAM 7330 with NANT-E running R5.1.01f crashed when executing the No NT-B Slot command via AMS and NT became in-accessible in customer configuration.ALU02182375 Prompt value is not okay when the operator is logged in via RADIUS VSAProblemWhile logging in with the newly created operator with prompt l

11、ength more than 28 characters via RADIUS, the prompt length in the session was maximum 19 characters even though sent length from RADIUS was more than 28 characters.ALU02153041NT reset right after abort of passive OSWP ProblemNT resets after the abort action of the passive OSWP ALU02154322 NDLT-C cr

12、ashingwhenenablingvectoringforsomelinesProblemNDLT-C crashed when enabling vectoring for some lines in ISAM 7330 running R5.1.02e with NANT-E and remote NDLT-Cs.ALU02083268 NT reset due to XDM operation bulk service migration (bulk TL1 operation)ProblemAn NT/LT reset issue was reported on one ISAM n

13、ode, when the OSS application in the network triggered bulk service migration (involving ATM PVC creation/deletion) using bulk TL1 commands.3FE-68884-AACP-FMZZA / Edition 02 RL - 14/Mar/201625/25ALU02131588IPv6 QoS - LT upstream marking of IPV6 traffic class for NALT-C boardProblemIt was not possibl

14、e to mark p-bit and DSCP (IPv4) and pbit and TC (Ipv6) with all zeros in upstream in a NANT- A/NALT-C ISAM. IPv6 Traffic Class remarking was not supported in the NALT-CALU02174832 Auto backup configured for SFTP hangsProblemISAM 7330 with NANT-D, NDLT-F/NDPS-C with Auto backup configured for SFTP, t

15、he process was hanging on several nodes.ALU02168559 NANT-A setup became unreachable after hot-restartProblemNANT-A running in redundant mode became unreachable via TELNET or craft when hot reset was done on the active NT.ALU02173134OLT does not send TR069 configuration to ONT ProblemOLT does not sen

16、d TR069 configurations which have beendone when ONT was in down status.ALU02181042GPON service is impacted during NT switchover ProblemWhen the first NT switchover after configuring ONT VLANport, traffic loss may happen because OLT wrongly sends MIB reset to ONU.ALU02184724GPON LT reboot with flappi

17、ng ONTProblemGPON LT may reboot in case some flapping ONT is connected.1.2 Release R5.1.02l Features / CorrectionsFollowing feature and fixes have been included in R5.1.02lALU02060175Merge back and support FGLT-B based on C0 into R510xFeatureFGLT-B C0 (3FE68954ABAA) is supported in R5.1.02l.Feature

18、parity is aligned with FGLT-B B1 (3FE68954ABAA).ALU020856907360 GPON: FGLT-A PON High BERProblemIn a few instances, high BER count was seen on a PON port. It could typically happen with ONUs responding relatively slow to PLOAM messages.ALU02109250 CES timeslot map change NOKProblemWhen some rules ha

19、s been defined in the timeslot map of a CES ONT service; next to this it must be possible to disable certain timeslots by setting the corresponding bit to 0. However, the OLT accepts a different timeslot map, the map always changes back to the full-use one.ALU02114139 OLT is not reporting the right

20、number of referenced ONTsProblemIn some cases, the SW Control Table is not updated correctly. As a result, the OLT is not reporting the right number of referenced ONTs.ALU02115053 switch xdsl ont line spectrum profile does not work correctlyProblemThe OLT ISAM 7360 doesnt send XDSL_UNI_SUPPLEMENTAL

21、ME to PDU device when switching spectrum-profile.ALU02117475 GPON LT rebooted with xqueue error infoProblemGPON LT exceptional rebooted due to NON_RECOV with error info and Reached BSP_TurnOnErrorIndicator. Sometimes, it can also trigger LT POWERON reboot.ALU02118159 FGLT-A 2K Maximum number of simu

22、ltaneous active multicast channels per board is not supportedProblem2K Maximum number of simultaneous active multicast channels per board is not supported. Observed only 1935 multicast channels are supported per FGLT-A.ALU02133867 Redundant NT declared hot-standby although some SW files are missingP

23、roblemAlthough NT-B was in hot-standby prior to the switchover, LTs did not become operational anymore because part of their SW was missing.ALU02137152 Unable to SSH into OLTProblemMemory leak in SSH module occurs when doing SFTP of BFMU configuration files of size more than 100KB (limited in BFMU).

24、 This leak builds up and ends to consume SSH memory. This will finally lead to SSH login of OLT fails.ALU02139041RSSI-prof-id 24 cannot be assigned to PON SFPProblemAdding rssi-prof-id 24 profiles to PON interfaces succeeds, until the value of total 100 rssi-prof-id 24 is reached. Any additional ass

25、ignment of rssi-prof-id 24 fails from that point on.ALU02141212OLT reboot with core 1 watchdog expired error ProblemWhen ONT Trace and debug session is initiated and activeover a network LAG interface due to a corner case it can happen that the buffers are double freed and will result in the NT goin

26、g for a reset. The failure scenario can happen when trying to send ONT trace and debug session packets over uplink by the packet handler application. Double free is triggered when the packet handler fails to transmit for reasons like physical link/LAG is not operational UP or the on board control pr

27、ocessor port is unable to handle the packet due to load conditions.ALU02144111 XML Files Cant be Downloaded to ONT from AMS with OMCI ftpProblemXML file download from AMS to ONT fails if the first 25 characters of the old and the new XML file names are the same.ALU0214472Packet drop shown for 7360 P

28、ON statistics due to multicast flooding from the NTProblemNT may send unnecessary multicast flooding traffic to LTs where connected subscribers have already left the group. This would result in the observation of a downstream drop counter increase on PON-1 of the LT. There is no functional impact to

29、 end-users as the dropped traffic is no longer needed by these video subscribers and IGMP Proxy on LT will drop the traffic.ALU02145518 GPON LT reboots when too many ONT video cards configuredProblemFor ONTs with RF overlay functionality, when the number of configured video cards exceeds half of the

30、 allowed number per LT, the GPON LT will reboot due to memory allocation failure. For NGLT-A/C, the issue will be triggered when configuring the 513th video card. For FGLT-A/B, it is when configuring the 1025th video card.ALU02146740 XDSL/G.Fast Far-end Line Data Retrieval Problem with CLIProblemIn

31、some case the CLI command show xdsl ont operational-data far-end line 1/1/2/2/1/8/1 may not report any value.ALU02148252 AES setting is wrongly disabled on GPON LTsProblemIn some special case, ONT AES setting will be wrongly disabled due to another ONT on the same PON status is down.ALU02150623 ONT

32、lost voice service after migrationProblemWhen ONT Voice XML configuration is set to OMCIV1 download mode, after migrating to R5.1, ONT might fail to download XML file after rebooting.ALU02155882 Multicast Operational Profile IGMP version default value is hardcoded with v2ProblemMulticast operational

33、 profile IGMP version default value (if UNI IGMP channel is not configured yet) should follow system level IGMP user side version, while it is hardcoded with v2.ALU02156773 FANT-F BD NT cannot be hot-standby due to different capabilitiesProblemTwo ANSI FANT-F NTs (3FE-53701-BD) cannot work as redund

34、ant pair when the capability registers in remote inventory is different (0030 and 0038). The standby NT will enter peer-locked status and cannot be in hot-standby status.ALU02157284OLT LOID mode does not meet the CTC standard ProblemOLT does not meet the CTC standard that when onlyconfiguring LOID o

35、n OLT, OLT will send both get LOIDand get PWD OMCI message when ONT registering;furthermore, in this case, OLT will firstly send get PWD, then get LOID which is not reversed comparing with the standard.ALU02159008 File system failed to upgrade on standby NTProblemWhen the standby NT goes through a r

36、eset during OSWP upgrading scenario, theres a possibility that the overloaded file system gets removed from this NT card at the moment of committing the software package. As a result of this, after a later reboot, the NT will be using the factory file system that is missing potential SW fixes.ALU021

37、59149 7360 FX over temperature limits with BFAN in protect modeProblemWhen the 7360 is FX running at high temperatures (e.g. due to an external heat source impact, improper air outlet, etc) with the BFAN in protect mode, the NT may become unreachable or shut down.ALU02159733 ONT service down after N

38、T hot-resetProblemPlanning ONT with SLID after NEWONT reported, ONT service will down after NT hot-reset.ALU02167977 Re-range ONTs and BER-up if fiber cut of other ONTs.ProblemIf a fiber cut is done of a splitter fiber (where several(32) ONTs are connected to) on a PON with a lot of ONTs (64) then f

39、rom a certain point onwards some of the other ONTs are re-ranging and also a lot of bit-errors are generated on all other ONTs.ALU02161048 NPOT-C Port High-temperature alarms creates MGC overloadProblemSporadic cases have been observed whereby a faulty NPOT-C port results in a rapid Alarm on/off flu

40、ctuation of the port high-temperature alarms, resulting in many SC 904/900 send to the MGC creating an overload condition. A protection mechanism has been build in (controlled via CDE parameter) to avoid this MGC overload.ALU02161039 Unexpected error response 521 for H248 modify message after sendin

41、g out Service change 900 to MGC.ProblemFor the user created on ISAM-V but not on MGC, when it receives audit message from MGC, ISAM-V is improved to send normal reply without service change. This improvement only applies for the special MGC type.ALU02166877 Frequent POS call failuresProblemPOS call

42、often fails just after switching to VBD as the VBD gain setting was not enabled.ALU02168267 H248 ISAM-V: voice ports become out of service as unexpected 512 error response sending to MGCProblemvoice ports become out of service as unexpected 512 error response sending to MGC even no service change se

43、nding out.ALU02164962 Hanging ZTV lines on a 384 line system with mixed G.vector, ZTV and real VDL2 legacy linesProblemAfter a while some of the the ZTV lines can get blocked on a 384 line system with mixed G.vector, ZTV and real VDL2 legacy lines. Those blocked ZTV lines dont reach showtime anymore

44、. No issue for G.VECT lines but for ZTV lines.WorkaroundIf you move an impacted line to the admin-down and next to admin-up state the line reaches showtime againALU02131314NANT-D/E resets due to PROC_FAULTS task:BFMUProblemWhen collecting BFMU data from 2 different SDC servers causing parallel/simul

45、taneous data collections (SDC 9.4), several of the NANT-D nodes running R5.1.01f (51.573) suffered from NT reset with a data access violation error. Not observed with NANT-AALU02153129 Unable to create rssiprof on ISAM CLIProblemRSSI profile created from CLI in ISAM running R5.0.02a was with values,

46、 all-zeros and was not editable.ALU02157727 Troubleshooting enhancement for checking CF aging statusEnhancement An enhancement was ( cfmo enable/getSmart) added in ISAM( with NANT-A) to check CF aging status via SMART(Self-MonitoringAnalysisandReportingTechnology) feature in the Compact Flash.ALU021

47、41055XDSL lines are not coming up for ( CDASA-SRNT-E) on SDLT-E boardProblemIn a CDASA system running R5.1.02h, with SRNT-E and SDLT-E, all XDSL lines(1,2 & 48 lines) were not coming up.ALU02159042DSL net data rates with ARQ in PPPoE/DHCPv4/6 tag EnhancementThis enhancement provides a change in the

48、interfacemanagement to send the ARQ values down towards transport repository incase the RTX is in use by the CPE.ALU021679617368 ONT SFP O-010S-P remains disabled after power cycling 7356 REM NRNT-AProblemConnectivity did not automatically recover after a REM power cycle at the 7368 ONT interface wi

49、th SFP O-010S-P (3FE54823AAAB01, SW : 3FE55040AOPA37) which wasplugged into an NRNT-A in the 7356 REM Sub-node running R5.0.01 and connected to the Hub node 7302 FD(FANT-F,NGLT-C) running R4.6.03a. In order to recover, the ONT interface had to be locked/unlocked on the Hub node.1.3 Release R5.1.02h

50、Corrections/ ImprovementsFollowing fixes are included in R5.1.02hALU02094519 Abnormal high temperature alarm raised or even shutdown LTProblemOccasionally, LT high temperature alarm is reported and automatically cleared even though the temperature is normal. In some case, FGLT-A will be wrongly shut

51、down due to this high temperature alarm.ALU02116222 NT card reset due to memory exhaustion in IHUB ProblemNT card reset due to memory exhaustion in IHUB. This willhappen when DHCPv6 relay is enabled in core1 and not in LT. In this scenario solicit, request, renew packets from client will consistentl

52、y create memory leak in IHUB.ALU02129201 ISAM MPLS status down due to iHub memory leakProblemThe ISAM cannot handle unsupported TLVs like vendor private TLV types from 0x3e02 to 0x3eff LDP hello messages (targeted and link sessions) coming from its peers. As a result, the system memory will be deple

53、ted over time. If insufficient memory is available, MPLS operations will be shut down and new services cannot be provisioned.ALU02130619 BFMU 1 day and 1 hour data collection massive writes in CFProblemDuring BFMU 1 day or 1 hour data collection, writing to the Compact Flash device will be done for

54、each new data retrieval operation. In case the output of the file is large due to the amount of elements of the MIB objects in configuration file, the writes in CF will be huge which will accelerate CF aging. Fix is to optimize the write frequency to CF which will also improve the BFMU performance.A

55、LU02130632 Troubleshooting enhancement for checking CF aging statusProblemTrace and debug function ( cfmo enable/getSmart) is added in ISAM to check CF aging status via SMART (Self- Monitoring Analysis and Reporting Technology) feature in CF. In R4503u, this function is only supported for WestDigita

56、l CF (SILICONSYSTEMS).ALU02121695Unexpected pilotswap on ZTV line can influence / corrupt init timersProblemWith ZTV, there is a difference between reported UAS and init times (UAS is lower than the measured Init time)ALU02137958LT reset due to xapi xqueue overflowProblemOn large systems, LT resets

57、are observed due to overflow of internal buffer queues.ALU02121049NDPS-B resets with Zero Touch VectoringProblemHot NDPS-B resets are observed when using ZTV due to overflow of a message buffer. In some cases, the NDPS-B reset goes together with LT reset caused by ALU02137958ALU02138413 legacyPilotEnableState enable/disable call failing when already enabled/disabledProblemIn case of state inconsistencies VCE and Proxy, ZTV lines can get stalledALU02129920, ALU02124754VCE gets st