质检部质量周例会报告.ppt

1、,质检部质量周例会报告,质量周例会Weekly Quality Report,一、部品 1、 质量数据概况quality data summary 2、 质量数据推移及分析quality data process and analyse 部品品质MO延误率The MO delay rate with components 关键部品工程不良率The Defect rate on line with Key components 关键部品批次合格率The Pass lots rate with Key components 来料异常关闭The complain timely closed rate

2、 with incoming 生产异常关闭The complain timely closed rate with produce 3、本周产生的投诉The complain in this week,二、产品品控 1、 质量数据概况quality data summary 2、 SMT-交验合格率 Sampling Inspection Accept Ratio of SMT 3、 C4交验不合格率 Sampling Inspection Defect rate of C4 3.1 TCL品牌包装交验不合格率及主要影响因素3.2 ALCATEL品牌包装交验不合格率及主要影响因素 3.3 MO

3、TO品牌包装交验不合格率及主要影响因素 4、外协贴片质量状况the quality issue on OEM mounting side 4.1直通率PRY 4.2各机型直通明细the pass rate for every project 4.3总装反馈外协贴片质量状况the quality issue on OEM mounting side 4.4、总装反馈外协贴片各机型前五项不良汇总Top 5 defect for every projects on OEM mounting side. 5、停线的质量问题Quality Issue for Line Stop 6、 C2例行实验报告状

4、况C2 Weekly Test Report 7、质量异常关闭率QualityAbnormity Close ratio 8、客户投诉Customer Complaint 三、所需支持,1、 质量数据概况quality data summary 2、 质量数据推移及分析quality data process and analysis 部品品质MO累计延误率The MO delay rate with components 关键部品工程不良率The Defect rate on line with Key components 关键部品批次合格率The incoming lots accept

5、ance rate with key components 来料异常关闭率The complain timely closed rate with incoming 生产异常关闭率The complain timely closed rate with produce 3、本周产生的投诉The complain in this week,部 品 质 量 周 报 Weekly Report of Components,质检部 SQA,W16( 2010.04.102010.04.16）,summary： 目标值1.8%，本周累计值： 1.08，达标。 The cumulative rate is

6、 1.08 % , which meet the target this week (target: 1.8%),部品品质MO累计延误率The MO delay rate with components,部品品质MO累计延误率The MO delay rate with components,部品品质MO累计延误率The MO delay rate with components,关键部品工程不良率（总）The Defect rate on line with Key components (total),本周关键部品工程不良率为 738 PPM， 达标 （目标：750PPM），相对前一周上升

7、了 201 PPM. This week, key components defects rate on line was 738 PPM ,which meet the target this week, and UP by 201 PPM as compared with thedatalast week. (target: 750PPM),关键部品工程不良率（总）The Defect rate on line with Key components (total),本周 This week, incoming components lots acceptancerate is 96.5

8、%,which Less the target this week ,and dropped by 0.8 % as compared with the data last week.(target: 98%),关键部品批次合格率（总） The incoming lot acceptance rate with Key components (total),本周&上周比较，部品批次合格率发生变化较大的前三项如下： The top 3 components increasing/decreasing Incoming lots acceptance rate compared to last w

9、eeks data:,关键部品批次合格率（总） The incoming lot acceptance rate with Key components (total),以目标值为参照物，本周影响批次合格率较大的前三项如下： The top 3 components most effect Incoming lots acceptance rates in this week:,影响部品批次合格率前三项分析top 3 analysis of The Pass lots rate of Key components,影响部品批次合格率前三项分析top 3 analysis of The Pass

10、 lots rate of Key components,影响部品批次合格率前三项分析top 3 analysis of The Pass lots rate of Key components,关键部品批次合格率（ALCATEL） The incoming lot acceptance rate with Key components (ALCATEL brand),summary： 目标值98 %，本周实际值 96.5 % ， 不达标 ； target: 98 %, The rate is 96.5 % , which Less he target this week.,关键部品批次合格率

11、（TCL） The incoming lot acceptance rate with Key components (TCL brand),summary： 目标值98 %，本周实际值 97.5 % ， 不达标 ； target: 98 %, The rate is 97.5 % , which Less the target this week.,量科按键批次合格率及工程不良率数据,主要问题点：无,来料异常及时关闭率The complain timely closed rate with incoming,summary： 目标值95 %，本周实际值 81.1 % ， 未达标 ； 未关闭的

12、部品主要有：塑胶件、包材、滑轨、装饰片、屏蔽件、Touch lens target: 95 %, The rate is 88.1 % , which Less the target this week.,生产投诉及时关闭率（部品责任）The complain timely closed rate with produce,summary： 目标值95 %，本周实际值 100 % ， 达标 ； 未关闭的部品主要有：/ target: 95 %, The rate is 100 % , which meet the target this week.,本周发生的来料异常共 34 单，具体分布如下： A total of 34 times , distribution is as follows :,本周发生的来料异常The complain with incoming in this week,具体见附件.The attached is the