- 现行
- 正在执行有效
- 2000-02-29 颁布
![【正版授权】 IEC 61300-3-36:2000 EN-FR Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Mea_第1页](http://file4.renrendoc.com/view4/M00/0E/0C/wKhkGGaEGxSAHjvwAAFx2ZMzQA8317.jpg)
下载本文档
基本信息:
- 标准号:IEC 61300-3-36:2000 EN-FR
- 标准名称:光纤互连设备和无源元件. 基本测试和测量程序. 第3-36部分:检查和测量. 光纤连接器插针插口外径和内径的测量方法
- 英文名称:Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
- 标准状态:现行
- 发布日期:2000-02-29
文档简介
IEC61300-3-36:2000EN-FRFibreopticinterconnectingdevicesandpassivecomponents-Basictestandmeasurementprocedures-Part3-36:Examinationsandmeasurements-Measurementmethodsfortheinsideandoutsidediametersoffibreopticconnectorferrules是国际电工委员会(IEC)发布的标准,用于光纤连接设备和无源组件的基本测试和测量程序。这个标准主要关注光纤连接器的内部和外部直径的测量方法。
以下是对该标准的详细解释:
IEC61300-3-36标准主要关注光纤连接器的尺寸测量,特别是光纤连接器插针(ferrule)的内部和外部直径。插针是光纤连接器的一部分,用于保护光纤并引导它进入连接器。
该标准规定了用于测量光纤连接器插针直径的方法,包括使用精确的测量工具,如卡尺或千分尺。这些工具可以测量插针的精确直径,并确保它们符合规定的公差范围。
具体来说,该标准可能包括以下测量步骤:
1.准备测量工具:根据IEC61300-3-36的要求,必须准备适当的测量工具,如精确的卡尺或千分尺,以及清洁和保护光纤连接器的适当设备。
2.外部直径测量:外部直径是指插针的外部表面直径。使用适当的工具,可以精确地测量插针的直径,并确保它符合规定的公差范围。
3.内部直径测量:内部直径是指插针孔的直径,这是光纤插入的地方。使用适当的工具,可以测量孔的直径,并确保光纤可以顺畅地插入。
4.清洁和维护:根据IEC61300-3-36标准,在测量过程中,必须保持光纤连接器的清洁,并定期维护和校准测量工具,以确保它们始终处于良好状态。
IEC61300-3-36标准是关于光纤连接器插针直径测量的重要
温馨提示
最新文档
- 【正版授权】 ISO 10673:2009 EN Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A
- 【正版授权】 ISO 10622:1997 EN Large cardamom (Amomum subulatum Roxb.),as capsules and seeds - Specification
- 【正版授权】 ISO 10524-1:2018/Amd 1:2023 EN Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1
- 【正版授权】 ISO 10438-2:2007 EN Petroleum,petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil sy
- 【正版授权】 ISO 10303-225:1999 EN Industrial automation systems and integration - Product data representation and exchange - Part 225: Application protocol: Building elements using expl
- 【正版授权】 ISO 10271:2020 EN Dentistry - Corrosion test methods for metallic materials
- 【正版授权】 ISO 10139-1:1991 EN Dentistry - Resilient lining materials for removable dentures - Part 1: Short-term materials
- 【正版授权】 ISO 10113:1991 EN Metallic materials - Sheet and strip - Determination of plastic strain ratio
- 【正版授权】 ISO 10110-8:1997 EN Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture
- 【正版授权】 ISO 10044:1995 EN Banking and related financial services - Information interchange - Documentary credit form
- 计算机知识类试题题库
- 地道工程施工方案
- 广西壮族自治区北海市2022-2023学年八年级下学期期末英语试题
- 16J916-1住宅排气道一
- 山东师范大学《古代文学专题(一)》期末复习题
- 契约情侣试恋爱之“卖身契”(范本)
- 警察类普通高等院校/公安现役院校招生政审表模板
- 最新护学岗工作方案、领导小组、制度资料
- 完整版)阿特拉斯空压机操作说明
- 石梁河小学 领雁工程项目学校工作总结(.1 sc)
- 减速器大齿轮的加工工艺分析
评论
0/150
提交评论