履历各屏画面说明书-简历-求职职场-实用文档

1、顧客名株式会社殿納入場所貴武漢泰極江森座椅有限公司殿御向装置名2W車履歴201301月3.0版桜井電材株式会社富士電株式会社富士電機機器制御株式会社富士株式会社上海撼域自动化科技有限公司NA503234-03ATENMEAPROEATENMEAPROEDDRWN0-07-070-07-07藤木NA503234-03HEKEDEVSINSHEKEDTis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way what

2、soever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DG.O.記号月日改者改改定由版208/06/0初版版208/11/5現試験果目 录画遷移本流程1表示30画表示明31装配安全气囊工位装配PS控制盒工位登录面罩/合棉工位确认安全气囊加强带B_P初化工程检查乘坐感应器工位静音室检查工程2345689信息一览扫描仪的设置方法设置方法326373839428完検査程11固部編転送法4347

3、画操作明画操作（共通）13温度14维修画面装配安全气囊装配P装配面罩/将强带B_P初化5成品检查6成品装盘151617181920显示系统状态画面22参数设定B_P初化乘坐感应器静音室参数设定232425打印条码Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing

4、purposs without the express written consent of Fuji etrc C.,t.打印条码（扫描）打印条码（输入）2728DG.O.DG.O.ATENMEAPROEATENMEAPROEDDRWN0-07-070-07-07藤木NA503234-03HEKEDEVSINSHEKED TiTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the us

5、e of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.3关闭报警強制结束参数设定（扫描）1DG.O.温度表示（仅乘1DG.O.现在时间显示现在时间（时间数据使用的是内時業程引导显示指触开关显示储存器报警显示各業容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。触摸蜂鸣器关闭。触摸维护开关就会切换至维护画面。内，实装的卡的储存容以储存下。Tis maeral and the iTis maeral and the i

6、foraton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.L完品条码储存I。显示紧固状态显示紧固状态，如：黄正：緑：红色显示_F状态下。接收发出的开始信号时：开始向发送工位作业完毕信号时：V終了接收

7、发出的强制終信：V制了DRWNATENMEAPROEDDG.O.0-07DG.O.44EVSINSHEKED HEKED20-07-072现在时间显示现在时间（时间数据使用的是内時業程引导显示指触开关显示储存器报警显示各業容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。触摸蜂鸣器关闭。触摸维护开关就会切换至维护画面。内，实装的卡的储存容以储存下。Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way wh

8、atsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示紧固状态，如：黄正：緑色显示_F状态下。接收发出的开始信号时：开始向发送工位作业完毕信号时：V終了接收发出的强制終信：V制了DRWNATENMEAPROED3DG.O.0-073DG.O.55EVSINSHEKED HEKED现在时间显示现在时间（时间数据使用的是内時業程引导显示指触开关显示各業容。計显示下一步的作业指示异常信

9、息。計发生异常时、亮灯。触摸蜂鸣器关闭。触摸维护开关就会切换至维护画面。Tis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.下。接收发出

10、的开始信号时：开始向发送工位作业完毕信号时：V終了接收发出的强制終信：V制了DRWNATENMEAPROEDDG.O.0-07DG.O.66EVSINS4HEKED 4现在时间显示现在时间（时间数据使用的是内時業程引导显示指触开关显示各業容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。触摸蜂鸣器关闭。触摸维护开关就会切换至维护画面。Tis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoe

11、ver for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.下。接收发出的开始信号时：开始向发送工位作业完毕信号时：V終了接收发出的强制終信：V制了DRWNATENMEAPROED5DG.O.0-075DG.O.77EVSINSHEKED现在时间显示现在时间（时间数据使用的是的时刻）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关

12、作。显示储存器报警Tis maeral and the iforaton erTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEA

13、PROED8DG.O.0-078DG.O.66EVSINS现在时间显示现在时间（时间数据使用的是的时刻）作业工位引导显示显示各作业内容。显示下一步的作业指示异常信息。发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关作。显示储存器报警Tis maeral and the iforaton erTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third pa

14、rty, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEAPROED8DG.O.0-078DG.O.EVSINS77现在时间显示现在时间（时间数据使用的是的时刻）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。指触开关湿蜂鸣器关闭维护的各指触开关作。显示储存器报警Tis maeral and the iforaton erTis maeral and the iforaton ern s te roe

15、rty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEAPROED9DG.O.0-079DG.O.EVSINSHEKED HEKED0-07-07瀬NA503234-0382. 画面显示说明 7.1 在线状态主画面

16、说明（LH,RH静音室检查工程）412. 画面显示说明 7.1 在线状态主画面说明（LH,RH静音室检查工程）412233441122TTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent

17、of Fuji etrc C.,t.33座椅识别码座椅识别码显示当前作业内容(座椅类别指示;座椅检测项目OK or NG指示;安全带及加热器电流设定值和当前值显示。)安全带状态指示： 加热器状态指示： 画面切换按钮。左/右座椅指示。DRWNATENMEAPROEDDG.O.100-07DG.O.10EVSINSHEKED HEKED0-07-07瀬NA503234-0392. 画面显示说明 7.1 离线状态主画面说明（LH,RH静音室检查工程）2. 画面显示说明 7.1 离线状态主画面说明（LH,RH静音室检查工程）32143214座椅识别码座椅识别码显示当前作业内容(座椅类别指示;座椅检测项

18、目OK or NG指示;安全带及加热器电流设定值和当前值显示。)安全带状态指示： 加热器状态指示： 画面切换按钮。左/右座椅指示。TTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of

19、 Fuji etrc C.,t.Tis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEAPROED11DG.O.0-07-07藤木11

20、DG.O.EVSINSHEKED HEKED0-07-07瀬NA503234-03102. 画面显示说明2. 画面显示说明 8.1 主画面显示说明（完成检查工程）现在时间显示现在时间（时间数据使用的是的时刻）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关作。显示储存器报警Tis maeral and the iforaton erTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r d

21、coed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEAPROED12DG.O.0-0712DG.O.EVSINSHEKED HEKED0-07-07瀬NA503234-03112. 画面显示说明2. 画面显示说明 8.2 主画面显示说明（完成品装盘工程）现在时间显示现在时间（时间数据使用的是的时刻）作业工位引导显示显示各作业内

22、容。計显示下一步的作业指示异常信息。計发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关作。显示储存器报警Tis maeral and the iforaton erTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express

23、written consent of Fuji etrc C.,t.DRWNATENMEAPROED12DG.O.0-0712DG.O.EVSINSHEKED HEKED0-07-07瀬NA503234-0312TiTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purp

24、oss without the express written consent of Fuji etrc C.,t.关闭蜂鸣器确认PLC的状态、接续状况，实施设定打印条码等时，。此指触开关，为了防止误操作，需要连续触摸。停止发生异常时所响起的警报。并且、使用强制复位钥匙也可关闭蜂鸣器。湿表示切换至温度示面。DRWNATENMEAPROEDDG.O.0-07DG.O.1313EVSINSHEKED HEKED0-07-07瀬NA503234-0313湿（图表）湿（数）湿上限値（数）用图标来显示温度数据。現湿。设定温度数据的上限。湿監设定温度視的有無。TiTis maeral and the if

25、oraton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.返回主画面。DRWNATENMEAPROEDDG.O.0-07DG.O.1414EVSINSHEKED HEKED0-07-07瀬NA5032

26、34-0314Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示PLC的模块状态。打印条码（扫描）显示固部设定SABDE螺丝的个数传送

27、带単/显示条形码打印画。可以打印出所扫描的条码。可登录各L/R1的部品番号及各编码，可显示装配有无模式。（大）设定SAB D。根根 /连动的切换。単：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。条形码打印（扫描）定登録可设定任意编码并可打印。若想使用此机能需要输入密码。在下载DT100A的CF卡内的固定部数据时应该是ON的状态。返回返回主画面。输入密码画面（出入），就会弹出（请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。DG.O.：DG.O.DRWNATENMEAPROED0-07-07藤木1515EVSINSH

28、EKED HEKED0-07-07瀬NA503234-0315Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示PLC的模块状态。显示

29、固部传送带単/可登录各L/R1的部品番号及各编码，可显示装配有无模式。（大）/连动的切换。単：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。定登録在下载DT100A的CF卡内的固定部数据时应该是ON的状态。返回返回主画面。DRWNATENMEAPROEDDG.O.0-07DG.O.1616EVSINSHEKED HEKED0-07-07瀬NA503234-0316Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe

30、, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示PLC的模块状态。显示固部传送带単/可登录各L/R1的部品番号及各编码，可显示装配有无模式。（大）/连动的切换。単：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。返回返回主画面。DRWNATENMEAPROEDDG.O.0-07D

31、G.O.1717EVSINS17HEKED HEKED17系统状态显示显示PLC的模块状态。中断PLC处理，强制返回至初始化。为防止误操作，需要触摸此秒才会实行处理。参数设定根据导通阻抗的、从而显示界限值（下）的设定画面。定登録数据示固部可登录的部番及種编码、可显示査模式。（大）在下载DT100A的CF卡内的固定部数据时应该是ON的状态。可手动操作夹具的夹紧、定位销及座椅汽缸支架的作动。治手操作TiTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dc

32、oed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.可操作乘坐感应器工位重锤装置的上升下降。DRWNATENMEAPROED18DG.O.0-0718DG.O.1818EVSINSHEKED HETis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll

33、be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.条形码打印（扫描）条形码打印（输入）显示PLC的模块状态。中断PLC处理，强制返回至初始化。为防止误操作，需要触摸此秒才会实行处理。显示条形码打印画面。可打印出用扫描仪所扫描的条形码。可设定任意编码并可打印。若想使用此机能需要输入密码。返回主

34、画面。输入密码画面（出入），就会弹出（请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。：的位数。DRWNATENMEAPROEDDG.O.0-07DG.O.1919EVSINSHEKED HEKED0-07-07瀬NA503234-0319Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party,

35、nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.条形码打印（扫描）条形码打印（输入）表示显示PLC的模块状态。中断PLC处理，强制返回至初始化。为防止误操作，需要触摸此秒才会实行处理。显示条形码打印画面。可打印出用扫描仪所扫描的条形码。可设定任意编码并可打印。若想使用此机能需要输入码。可确认在上一工位所发行的【装配SABU】条形码以及登录了生产指示NO.的文件夹状态。返回返回主画面。条形码触摸此按钮可登录条形码及産示条形码。顺序是先将条形码按钮调成ON，然后

36、扫描条形码，最后扫描生产指示条形码。请按照上述操作顺序在（状态示）里确认所扫描条形码的登录状态。并且，请注意不要忘记返回此按钮。输入密码画面（出入），就会弹出（请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。DG.O.：DG.O.DRWNATENMEAPROED0-07-07藤木EVSINSHEKED HEKED0-07-07瀬NA503234-0320Tis maTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dc

37、oed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示PLC的模块状态。中断PLC处理，强制返回至初始化。为防止误操作，需要触摸此秒才会实行处理。扫描后排坐垫此按钮是来选择是否扫描后排坐垫的按钮。返回主画面。DRWNATENMEAPROEDDG.O.0-07DG.O.2121EVSINSHEKED HEKED0-07-07瀬NA503234-03

38、21Tis maeral and the iforaTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.返回返回主画面。在触摸屏中读取PLC的内。（正）

39、发生异常时，可重启CPU的电源，检查電及缆线。电池发生异常时，因电池已到达寿命所以需更换。平时使（）情况下运用。DRWNATENMEAPROEDDG.O.0-07DG.O.2222EVSINSHEKED HEKED0-07-07瀬NA503234-0322Tis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor use

40、d for the manufacturing purposs without the express written consent of Fuji etrc C.,t.选择要变更的数据。键，或者直接触摸想设置的数值。设置数据。开关后进行设置小数点以后的数值。、触摸。确认，直接触摸返回或是的话，自动放弃变更后的数值。左边有从的选择按钮，可选择种模式。变更完后，触摸返回按钮。DRWNATENMEAPROEDDG.O.0-07DG.O.2323EVSINSHEKED HEKED0-07-07瀬NA503234-0323Tis maerTis maeral and the iforaton ern

41、 s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.选择要变更的数据。键，或者直接触摸想设置的数值。设置数据。开关后进行设置小数点以后的数值。、触摸。确认，直接触摸返回或是的话，自动放弃变更后的数值。左边有从的选择

42、按钮，可选择种模式。变更完后，触摸返回按钮。DRWNDG.O.ATENMEAPDG.O.24240-07-07藤木2424EVSINSHEKED HEKED7. 参数设定7. 参数设定 3.1 静音室检查参数设定（LH,RH）12345安全带未插入状态和已插入状态电流范围设置。TP5车型座椅加热电流范围设定。T4NA车型座椅加热电流范围设定。返回工作画面。数值输入键盘。进入画面密码 443DATANAME13-01-10DATA朱瀚文257. 参数设定7. 参数设定 3.2 静音室检查登录设定（仅LH1可设定）12458DATANAME13-01-10DATA朱瀚文37626车种编号及识别码。

43、车种编号及识别码。安全带检测项目设定。加热器检测项目设定。车种设定。返回按钮。表皮颜色。靠背检测项目设定。输入键盘。进入画面密码 1357有两种打印条形码的方法。第一幅图是不需要密码就可使用的，这种是先扫描条形码即可打印出已扫描的条形码。Tis maeral and the iforatTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party,

44、 nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.DRWNATENMEAPROED25DG.O.0-0725DG.O.EVSINSHEKED HEKED0-07-07瀬NA503234-0327用扫描仪扫描手中的条形码后将会显示在条形码那一栏中，决定打印条形码后，就会显示在打印条形码的那一栏中，触摸打印按钮即可打印。Tis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. T

45、ey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.（出入），就会弹出请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。DG.O.：DG.O.DRWNATENMEAPROEDDG.O.0-07DG.O.2626EVSINSHEKED HEKED0-

46、07-07瀬NA503234-0328。触摸模式切换可进行切换。输入框背景黄色时使用扫描仪，蓝色时使用数字键盘。使用扫描仪模式切换可使输入栏变成黄色。用扫描仪扫描手中的编码。若还残有之前的数据触摸将其清除。Tis maeral and thTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufa

47、cturing purposs without the express written consent of Fuji etrc C.,t.但是只能设置英文字母。若在途中输入英文数字以外的字母及空格的话将无法正确的打印出条码。确定数据后，触摸。确认，直接触摸返回或是打印的话，。，自动放弃变更后的数值。打印，即可打印出已设定的条形码。每触摸一次就可打印一张。打印完毕之后，触摸返回。DRWNATENMEAPROEDDG.O.0-07DG.O.2727EVSINSHEKED HEKED0-07-07瀬NA503234-0329Tis mTis maeral and the iforaton ern

48、s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.显示（大）页数共显示页。翻页切换至下一页。也可返回至上一页。返回清除返回至主画面。在最后页里有清除按钮。若触摸此按钮，。DRWNATENMEAPROEDDG.O.0

49、-07DG.O.2828EVSINSHEKED HEKED0-07-07瀬NA503234-0330现在时刻显示现在时刻（时钟数据使用的是内時録数据显示登。触摸510,5的各开关后将切换至显示登录数据的对象。关于部、编码、条形码的变更：触摸変対値示部位就是要变更的部位。使用下面的软键盘输入数值后请按回车。装配/検有更象01。1:0:选择状态无。Tis maerTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whats

50、oever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.触摸此按钮后，将切换至维护画面或主画。DRWNATENMEAPROEDDG.O.0-07DG.O.2929EVSINSHEKED HEKED0-07-07瀬NA503234-0331密正确密不正确请入密码请取生看板条形码请取A模的请取OS UI序列形码请取TM O的形码请取P条形码条码位错误/定外形码Tis maerTis maeral

51、 and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.该品号有登陆标打印无应答成品装盘LC数端子有应答扭力值不常请装配ABUE HN代码印中 HN代码送中数登陆中数登陆从矩扳

52、过来信号收异常DRWNATENMEAPROED32DG.O.0-0732DG.O.3030EVSINSHEKED HEKED密正确密不正确请入密码请入生看板形码条码检中规外条码部号检中该品号有登陆起条件具备请开脚开关生看板一致请下开按钮测测结果规定围外汽异常阅读中输入中Tis maeTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, n

53、or used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.输入异常检查待机中数登陆中数终端有应答数登陆温度异常非停止钮处ON中DRWNATENMEAPROEDDG.O.0-07DG.O.3131EVSINSHEKED HEKED0-07-07瀬NA503234-0333密正确密不正确请入密码请入生看板形码条码检中规外条码部号检中该品号有登陆起条件具备请开脚开关重锤荷装异常请下开按钮重锤置下中重锤置上中测测结果规定围外汽异常Tis maeral Tis maeral an

54、d the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.阅读常输入异常数登陆中数终端有应答数登陆温度异常非停止钮处ON中DRWNATENMEAPROEDDG.O.0-07DG.O.3

55、23032323032EVSINSHEKED HEKED0-07-07瀬NA503234-0334密正确密不正确请入密码请入生看板形码条码检中规外条码部号检中该品号有登陆测测结果规定围外阅读中输入Tis maeTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs

56、 without the express written consent of Fuji etrc C.,t.输入异常数登陆中数终端有应答数登陆温度异常非停止钮处ON中标打印打印标打印打印中请入密码密正确密不正确请入密码请入生看板形码条码检中规外条码部号检中该品号有登陆生看板一致测测结果规定围外阅读中输入中阅读常输入异常数登陆中数终端有应答数登陆温度异常非停止钮处ON中DRWNATENMEAPROED0-07-07藤木3333EVSINSHEKED HEKED0-07-07瀬NA503234-0335密正确密不正确请入密码请数据条码检中规外条码部号检中该品号有登陆综判定G 生看板一致综判定K

57、判中测结果规定围外阅读中输入Tis maeTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.输入异常数登陆中数终端有应答数登陆温度异常非停止钮处ON中

58、标打印打印没登陆致的产看板标打印打印中DRWNATENMEAPROEDDG.O.0-07DG.O.3434EVSINS36HEKED36KEYENCE制KEYENCE制用户手册系列：。设定用表形码表就可一起设定。初期化设置通信设置开始设置（用户手册5开始设置（用户手册5-）初期化（用户手册5设置条码種別：（用户手册5-）设置完毕Tis maeTis maeral and the iforaton ern s te roerty f Fji Eetrc o.,Lt. Tey sll be nthr rpoue, coe, ln, r dcoed in any way whatsoever for

59、 the use of any third party, nor used for the manufacturing purposs without the express written consent of Fuji etrc C.,t.设置波特率：（用户手册52）设置数据长度：比特（用户手册52设置奇偶：偶（用户手册52设置比特位：比特（用户手册52扫描编号传输速度检测位奇偶数比特長结束位比特端子Cde3919200bs无偶数7bt2bt2设置终端：任意設定（用户手册53设置终端：（用户手册53设置终端：（用户手册53设置终端：（用户手册53设置终端：（用户手册53设置终端：確（用户手

60、册53设置完毕DG.O.（用户手册DG.O.DRWNATENMEAPROED0-07-07藤木3535EVSINSHEKED HEKED0-07-07瀬NA503234-033737Tis maeraland the iforatonernsteroertyfFjiEetrc o.,Lt.Teysllbe nthrrpoue,coe,ln,r dcoed in any waywhatsoeverfortheuseofanythirdparty,norusedforthe manufacturingpurposswithouttheexpresswrittenconsent ofFuji etr