05吨苏伊士运河吊 技术协议

1、技 术 协 议 书TECHNICAL AGREEMENT 本协议是由江阴市安海船舶设备有限公司（以下简称“卖方”）与江苏润昌船舶重工有限公司(以下简称“买方”)双方协商达成的。 项目 PROJECT : 57000DWT Bulk Carrier 船号 HULL No. : HT037/038/039/040/041/042 挂旗 Flag: Liberia 船东 Ship owner : 船厂 Shipyard : 江苏润昌船舶重工有限公司 设备 quipment : 0.5吨苏伊士运河灯吊 制造厂Manufacturer ： 江阴市安海船舶设备有限公司数量 Qty. : 1 套/船 证书C

2、ertification: 工厂合格证书 参加人员 Attendance: 买方Buyer: 江苏润昌船舶重工有限公司 卖方Seller: 江阴市安海船舶设备有限公司 时间与地点 Time and place: 江苏润昌船舶重工有限公司 买方Buyer: 卖方Seller: 江苏润昌船舶重工有限公司 江阴市安海船舶设备有限公司签字Signature: 签字Signature:1概述General1.1 本协议是用中文和英文书写的，若有矛盾，以中文为准。 This agreement is written in both Chinese and English language. However

3、 Chinese language interpretation shall prevail, if any contradictions occur. 1.2 设备及材料应符合合同签订时最新规范要求。 Equipment and material shall be in accordance with the lasted standard at the time when the contract is executed.1.3 待合同签订之后，本协议才能生效。 This agreement shall become effective on the date when the contr

4、act has been duly executed.1.4 制造厂须向买方提供与工作图相一致的设备。生产过程中任何的改动，应征得买方同意，并书面做出修改标记及说明寄给买方。The manufacturer shall guarantee that the equipment it supplies the BUYER shall conform to the working drawings. In case any modification is necessary during the process of manufacturing, the manufacturer shall im

5、mediately contact and obtain consent from the BUYER and send the BUYER the marking of modifications and the explanations.1.5 在设备出厂试验前 15 天，卖方应通知买方参加验收. 15 Days prior to shop delivery test for the equipment, SELLER should inform BUYER to attend the test and submit the inspection.1.6制造厂向买方提供从交船之日起为期12

6、个月的产品保修。 The manufacturer shall warrant the equipment for a period of 12 months after delivery ship.2 设备状况 Equipment2.1型号及名称 Type and Name: 500KG/2.5m手动苏伊士运河灯吊 2.2数量 Qty: 左舷Portside sets/ship 右舷starboard sets/ship 总数Total 1 sets/ship2.3环境温度 Environment temperature: -200 5002.4设备与甲板连接形式 Connection ty

7、pe between equipment and deck:焊接 Welding2.5 技术要求 Technical specifications1) 技术要求 Technical specifications500kg/2.5m 手拉回转苏伊士运河灯吊 500kg/2.5m manual slewing Suez light crane 1、安全工作负荷:500kg Safety Working loading: 500kg2、工作半径：2.5m （实际工作半径在认可图中确定） Working radius: 2.5m （the working radius to be confirmed

8、in approved drawing）3、钢丝绳规格：6X37-8-1670-GALV.-NON TWIST 非转型 Type of steel wire： 6X37-8-1670-GALV.-NON TWIST4、起货绳速: 厂家标准 Hosting speed： Maker standard5、起升高度：10m Lifting height: 10m6、回转角度：360度 Slewing angle: 360°7、吊钩高度： 3米(具体高度在认可度中确定) Hook height： 3m（the actual height will be confirmed in approv

9、ed drawing）8、起升方式： 手动 Lifting fashion: manual9、回转方式： 手拉 Slewing fashion manual10、起升机构应有可靠的自锁装置，重物在任意高度不得下滑。 The hoisting gear to be had self-locked device. The weight can not lower at the hung stage.11、设计状况 design condition: 横倾 heel 5° 纵倾 trim 2°12、所有紧固件为不锈钢（受力件除外） All tight fitting to be

10、SUS.(except the forced part)2) 标牌 Indication plate : 文字要求 Language 英文 English 材料要求 Material 不锈钢 Stainless 2.6 备件要求 Spare parts: 符合制造厂标准Complete with Manufactory standard2.7 油漆 Painting:表面处理 Surface disposal : 除锈达2.5级 Shot Blast to Sa2.5底漆 Primer paint: 通用环氧底漆 prismatic universal epoxy prime 100 面漆 f

11、inish paint 待定 pending 颜色： finish color 待定 pending2.8 测量单位： ISO 和公制标准Measuring unit: ISO and metric standard.2.9 附图仅供参考（本协议第5页） The attached general drawing is only for reference.( P5)3供图范围 Scope of drawings to be supplied （或按船厂要求）3.1 确认图 Approval drawing: first ship sets following ship setsIn Engli

12、sh In Chinese In Chinese & English 3.2 工作图 Working drawing: first ship sets following ship setsIn English In Chinese In Chinese & English 3.3 完工图 Final drawing: sets/ship In English In Chinese In Chinese & English 3.4 合同签订后 天内,卖方应向买方提交确认图。 After the contract is executed, SELLER should su

13、bmit the approval drawing to BUYER within days. 3.5 在收到确认图后，买方应退回1份确认图及其意见书，若在 天内买方不退确认图，这意 味着买方对确认图没有意见。After receiving the approval drawing, BUYER will return 1 copies of approval drawing with comments. If BUYER has not returned the approval drawings within days, that means BUYER has no comments o

14、n the approval drawing.3.6 完工图在买方交船前一月提供 The final drawing should be sent to BUYER before one month buyer delivery the vessel. 3.7资料内容 Counter of Drawings and Documents序号No.图纸名称Name of drawing确认图Appr. DWG.工作图Cont. DWG.完工图Final DWG.备注Remark1总图G.A.YESYESYES2备件清单Spare parts listYESYESYES3试验大纲Test progr

15、amYESYESYES4工厂试验报告Test reportYES5使用说明书instructionYESYESYES6工厂证书Factory certificationYES7发货清单Packing list YES4 供货范围 Scope of supply 1, 一套-完整的带手拉回转和手动起升装置，吊钩等的小吊One (1) set A complete set of the davit with manual slewing and manual hoisting gear and hook. 一套-提升限位装置One (1) Hoisting limit device( limit switch)一套-备件和一个工具盒One (1) Spare parts and