版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Preface, ContentsIntroduction1Functionality2SIMATIC HMIDesign3Mobile Panel 170Safety4CommissioningEquipment Manual5Operation6Screen Objects7Special Functions for Mobile Operation and Monitoring8System Settings9Installation10Dimensions11Memory Cards12Maintenance and Repair1
2、3Operating System Update14AppendicesAbbreviations, Glossary, IndexThis manual has the Order No.: 6AV6591-1DC30-0AB0Release 09/02A5E00176605-01该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Releas2Safety NotesThis manual contains notices which you should observe to ensure your own per- sonal safety, as well as to protec
3、t the product and connected equipment. These notices are marked as follows according to the level of danger:Dangerindicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ! Warningindicates a potentially hazardous situation which, if not avoided, cou
4、ld result in death or serious injury. ! Cautionused with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. ! Cautionused without the safety alert symbol indicates a potentially hazardous situation which if not avoided,
5、may result in property damage.Noticeindicates that unwanted events or status can occur if the relevant information is not observed.Notedraws your attention to particularly important information on the product, handling the product, or to a particular part of the documentation.该文档是极速PDF编辑器生成,如果想去掉该提示
6、,请并:Release 09/02QualifiednelEquipment may be commissioned and operated only by qualifiednel.Qualifiednel within the meaning of the safety notices in this manual are per-sons who are authorized to commission, ground and identify equipment, systems and circuits in accordance with safety engeneering s
7、tandards.Intended UsePlease note the following:WarningThe device may only be used for the application cases specified in the catalog and the technical description and may only be used in combination with third-party equipment and components recommended or approved by Siemens.Startup must not take pl
8、ace until it is established that the machine which is to accommodate this component is conforms with the guideline 98/37 EC.Appropriate transport, and appropriate storage, installation and assembly, as well as careful operation and maintenance, are required to ensure that the product operates perfec
9、tly and safely. ! ImpressumEditor and Publisher: A&D PT1 D1Copyright Siemens AG 2002sExclusion of LiabilityWe have checked the content of this publication for compliance with the described hardware and software. However, discrepancies cannot be exclu- ded, with the result that we cannot guarante
10、e total compliance. The informa- tion in this publication is, however, checked regularly, and any necessary corrections are included in he subsequent releases. We welcome any sug- gestions for improvement.The transmission and reproduction of this documentation and the exploitation and communication
11、of its contents are not permitted without expressauthority. Offenders will be liable for compensation for damage.s, especially in he case of the granting of a patent or registra ion of autility mor designSiemens AGBereich Automation & Drives Geschäftsgebiet SIMATIC HMI Postfach 4848, D-9032
12、7 Nürnberg Siemens AG 2002Technical data subject to change.Siemens Aktiengesellschaft6AV6591-1DC30-0AB0该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Releas2该文档是极速PDF编辑器生成,如果想去掉该提示,请并:PrefaceThis manualThe “Mobile Panel 170” Equipment Manual is part of the SIMATIC HMI documen- tation.The manual provides operation,
13、 installation, configuration planning and mainte-nancenel with information concerning configuration, functional scope,installation and operation of the Mobile Panel 170.HistoryThe release of this manual corresponds to the following versions of the ProTool CS configuration software:Mobile Panel 170 E
14、quipment Manual6AV6591-1DC30-0AB0vReleaseCommentProTool CSRelease 09/02First edition of the “Mobile Panel 170” equipment manualFrom V6.0 + SP2该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Relea02NotationThe following conventions are used throughout this manual:Text in the operating unit display is presented in this ty
15、pe- writer font.Symbolic names representing tag values on the screen are presented in this italic typewriter font.Functions available for selection are presented in this italic font.The names of keys and buttons are displayed in this font.Motor offTagScreensESCTrademarksThe following names are regis
16、tered trademarks of the Siemens AG: HMIâ SIMATICâ SIMATIC HMIâ SIMATIC Mobile Panel 170â ProAgentâ ProToolâ ProTool/Liteâ ProTool/ProâThe remaining trademarks in this documentation may be trademarks, whose use by third parties for their own purposes could viol
17、ate the rights of the owner.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0vi该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Release 09/02refA&D Technical SupportAvailable round the worldwide:NuernbergJohnson CitySIMATIC HotlineThe languages of the SIMATIC Hotlines and the authorization hotline are generally Ger
18、man and English.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0viiWorldwide (Nuernberg)Technical Support24 hours a day, 365 days a year Phone:+49 (0) 180 5050-222Fax:+49 (0) 180 5050-223:adsupport GMT:+1:00Europe / Africa (Nuernberg)AuthorizationLocal time: Mon.Fri. 7:00 to 17:00Phone:+49 (0) 18
19、0 5050222Fax:+49 (0) 180 5050-223:adsupport GMT:+1:00United States (Johnson City)Technical Support and AuthorizationLocal time: Mon.Fri. 8:00 to 17:00Phone:+1 (0) 770 740 3505Fax:+1 (0) 770 740 3699:isd-callcenter GMT:5:00Asia / Australia ()Technical Support and AuthorizationLocal time: Mon.Fri. 8:3
20、0 to 17:30Phone:+86 10 64 75 75 75Fax:+86 10 64 74 74 74:adsupport.asia GMT:+8:00该文档是极速PDF编辑器生成,如果想去掉该提示,请并:PrefaceRelea02Service & Support on the InternetThe SIMATIC Customer Support provides you with additional information about SIMATIC products through online services: General current informa
21、tion can be obtained in the Internet under Current product information, FAQs, tips and tricks and downloads which you may find useful are available: in the Internet underTraining CenterWe provide appropriate courses in order to simplify your introduction to the world of automation systems. Please co
22、ntact your regional Training Center or the Train- ing Center headquarters in D 90327 Nürnberg.Telephone: Internet:+49 (911) 895-3200infoOther supportIn the case of further queries concerning SIMATIC HMI products, please contact the Siemens representatives in the subsidiaries and branches respon
23、sible for your area.The addresses can be found: in the Siemens Catalog ST 80in the Internet under in the Interactive Catalog CA01Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0viii该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Release 09/02refSIMATIC HMI DocumentationThe SIMATIC HMI Documentation includes the follo
24、wing components: User guides forconfiguration software runtime softwarecommunication between PLC and operating unit Equipment manuals for the following operating units:SIMATIC PCMP (Multi Panel)OP (Operator Panel) TP (Touch Panel) TD (Text Display)PP (Pushbutton Panel)SIMATIC Mobile Panel 170 Online
25、 help for the configuration software Installation guidesQuick reference manualsThe following table provides titles of SIMATIC HMI manuals which contain informa- tion beyond the scope of this equipment manual.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0ixDocumentationTarget groupContentsGettin
26、g StartedQuick Reference ManualBeginnersExamples are used to explain the configuration of a screen with various objects, changing a screen, and a message step-by-step.This documentation is available for text-based displays, graphics displays, touch panels, Windows-based systems.ProToolConfiguring Wi
27、ndows- based SystemsUsers GuideConfiguration plannersProvides information on the configuration software: principles of the configuration detailed description of objects and functions which can be configured examples该文档是极速PDF编辑器生成,如果想去掉该提示,请并:PrefaceRelea02Mobile Panel 170 Equipment Manual6AV6591-1DC
28、30-0AB0xDocumentationTarget groupContentsProTool Online HelpConfiguration plannersProvides information on working with ProTool on the configuration computer: context-sensitive help detailed instructions and examples detailed information all information from the user guidesCommunication for Win- dows
29、-based SystemsUsers GuideProgrammersProvides information on connecting Windows-based systems to the following PLCs: SIMATIC S5 SIMATIC S7 SIMATIC 505 SIMATIC WinAC SIMOTION PLCs of other manufacturers This documentation describes the configuration and parameters necessary for connecting the operatin
30、g unit to a PLC and the data network, and the user data areas which serve for data exchange between the operating unit and PLC.该文档是极速PDF编辑器生成,如果想去掉该提示,请并:Contents1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Fu
31、nctionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313234353633.43.5Mobil
32、e Panel 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connection Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connectivity Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33、. . . . . . . . . . . . . . .Wall Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Protective Covers and Protective Foil . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Safety4.6. . . . . . . . . . . . . . . . . .
34、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operational Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35、. . . .Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STOP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connectivity Box Plus . . . . . . . . . . . . . . . . . . . . . . . .
36、. . . . . . . . . . . . . . . . . . . .Connectivity Box Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acknowledgement Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Risk analysis of the system to be monitored . . . . .
37、. . . . . . . . . . . . . . . . . . . .41414243434546484105Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51525353545555595105125125145..15.8.2Initial Startup . . . . . . . . . . . . .
38、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Recommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Start downloading manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Start downloa
39、ding automatically during normal operation . . . . . . . . . . . . .Operating Unit Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Options for Download Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Test the Configuration . . . . .
40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Uploading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ProSave Service Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41、. .Backup/Restore the Internal Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . .Backup/Restore on CF memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Backup/Restore using ProSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mobile Panel 170
42、 Equipment Manual6AV6591-1DC30-0AB0xi该文档是极速PDF编辑器生成,如果想去掉该提示,请并:ContentsRelea025.95.10License Transfer (Authorization) Using ProSave . . . . . . . . . . . . . . . . . . . . .Load Applications Using ProSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5185206Operation . . . . .
43、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6161636364656768696116146166176..Holding and Setting Down the Operating Unit . . . . . . . . . . . . . . . . . . . . . . .Operating Elements
44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating touch elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45、. . . . .Enter numeric values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Enter alphanumeric values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call in help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46、. . . . . . . . . . . . . . . . . .Membrane Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acknowledgement Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STOP button . . . . . . . . . . . . . . . . . . . . . . .
47、. . . . . . . . . . . . . . . . . . . . . . . . . . . .Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Key-operated Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pushbutton With Inte
48、grated LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Screen Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71717475777979711711713714715717718719720721722723724721.17.11
49、.3Operating Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Logging On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Overview of Screen Objects . . . . . . . . . .
50、. . . . . . . . . . . . . . . . . . . . . . . . . . . .Input Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Selection Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Date/Time . . . .
51、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Graphic Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52、 . . . . . . . . . . . . . . . . .Status Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Messages . . . . . . . . . . .
53、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ALARM_S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54、 . . . . . . .Message window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message buffer . . . . . . . . . . . . . . . . . . . . . . . . .
55、 . . . . . . . . . . . . . . . . . . . . . . . .Message display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single message display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bar Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 二零二五版绿色包装材料研发及推广合同2篇
- 2025年度石料厂产品质量安全承包管理合同范本2篇
- 二零二五年度城市综合体建筑设计合同3篇
- 2025年度高新技术企业知识产权质押担保合同范本3篇
- 二零二五版农村小微企业发展借款合同解析论文3篇
- 二零二五年生物制药工艺技术聘用合同2篇
- 二零二五版股权代持协议签订前的合同谈判注意事项3篇
- 二零二五年度建筑工程安全施工环境保护监理合同3篇
- 二零二五版购房合同违约责任条款解析3篇
- 2025年度紧急物资承揽运输合同3篇
- 停车场施工施工组织设计方案
- GB/T 37238-2018篡改(污损)文件鉴定技术规范
- 普通高中地理课程标准简介(湘教版)
- 河道治理工程监理通知单、回复单范本
- 超分子化学简介课件
- 高二下学期英语阅读提升练习(一)
- 易制爆化学品合法用途说明
- 【PPT】压力性损伤预防敷料选择和剪裁技巧
- 大气喜庆迎新元旦晚会PPT背景
- DB13(J)∕T 242-2019 钢丝网架复合保温板应用技术规程
- 心电图中的pan-tompkins算法介绍
评论
0/150
提交评论