精品资料(2021-2022年收藏)蜡处理作业指导书图文精_第1页
精品资料(2021-2022年收藏)蜡处理作业指导书图文精_第2页
精品资料(2021-2022年收藏)蜡处理作业指导书图文精_第3页
精品资料(2021-2022年收藏)蜡处理作业指导书图文精_第4页
精品资料(2021-2022年收藏)蜡处理作业指导书图文精_第5页
已阅读5页,还剩3页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、 1. 目的 Purpose提高蜡的品质,延长蜡的使用寿命。2. 适用范围 Applicable scope蜡处理3. 参考文件 Conference无4. 定义 Definition无 No5.职责和权限 Duty and Authority壳模脱蜡和蜡处理人员负责蜡的回收和处理,保证蜡的清洁干净,尽量延长蜡的使用寿命;任何不 相关人员不得随意更改蜡处理设备上的任何参数6 流程图 Flow chart搅拌除水 排水排渣 静置除水除渣 7. 执行步骤 Execution step 7.1 搅拌 Beat up将除水和过滤后的蜡送到搅拌桶中在 105115 搅拌 45小时,在这个过程中排水 3次

2、以上 .105115 beat up 45h,In the process dewatering in 3 time more.Will the water and filter of wax to stir the barrels 7.2 过滤 Filtrate通过 120目过滤网将搅拌桶中的蜡放入静置桶中,注意更换过滤网,以防杂质堵塞过滤网至蜡溢出。 By 120 the screen will beat the barrel of the barrel at the replacement filters,in case of impurities filter to block the

3、 overflow7.3 静置 Stand将温度调到 8090 ,静置 8h 以上。静置期间排水 23次。静置好的蜡即可送入压蜡机使用。 Keep the temperature of sedimentation vat within 8090 , and sedimentate over 8h. During sedimentary period, it should be drained at 23 times regulary. Trasmit the settled wax into wax injection machine according to requirement.蜡处理作

4、业指导书 Mornitoring and Measurement ot product 爱福易镉镍技术(武汉)有限公司 编号 页码 P82WH04A 82WH04A WH 6 / 6 7.4.注意事项Notice 1 每季度用热水或蒸汽清洗除水桶、静置桶一次。 Clean water evaporation vat and sedimentation vat once by hot water or steam monthly 2 每天用温度计测量除水桶内的油温是否与仪表吻合,若误差在 5以上,必须通知相关人员对仪表进行校验。 check the temperature of oil in v

5、at 1 time per day, compare with temperature which is showen by set. If the diffrence is more than 5 , info maintenance man to repair the set. 3 按规定要求认真填写蜡处理记录。 record according to Record of Wax Treatment in Water Evaporation Vat and Record of Wax Treatment in Sedimentation Vat. 每次新蜡加入不可超过搅拌桶容积的 10%。

6、Adding each new wax should not exceed 10% of the volume mixing bucket. 加入新蜡时首先测量搅拌桶剩余蜡的体积。即:Add a new stirring the wax when the first measurement of the volume of barrels of remaining wax. That T= *R*R*H* 其中 Among T R H 为剩余蜡的体积 The volume of the remaining wa 为圆周率 As pi 搅拌桶的内径半径 Mixing barrel bore radius 搅拌桶内剩余蜡的高度 The height of the remaining wax mixing bucket 根据体积乘以蜡的密度算出搅拌桶内剩余蜡的重量,每次加入新蜡的重量不可超过这个重量 10%。According to the volume calculated by multiplying the density of wax remaining wax weight mixing bucket, add a new candle each tim

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论