使用LVS实现高性能负载均衡实际操作说明

1、使用LVS实现高性能负载均衡实际操作说明kkmangnn 网站: 前言：本文使用lvs实现负载均衡 一. 网站负载均衡拓朴图 . IP信息列表：主机名IP说明 LVS-DR-Master LVS-DR-BACKUP LVS-DR-VIP WEB1-Realserver WEB2-Realserver GateWay ，需要安装有gcc openssl-devel kernel-devel包 二. 安装LVS软件包 1. 下载相关软件包 #mkdir /usr/local/src/lvs #cd /usr/local/src/lvs #wget 2. 安装LVS #lsmod |grep ip_

2、vs#uname -r#ln -s /usr/src/kernels/#make & make install三. 配置LVS实现负载均衡 1 LVS-DR，配置LVS脚本实现负载均衡应， #!/bin/bash# website direcotor vip.case $1 in start)/sbin/ifconfig eth0:0 $SNS_VIP broadcast $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP up/sbin/route add -host $SNS_VIP dev eth0:0/sbin/ipvsadm -A

3、-t $SNS_VIP:80 -s rr/sbin/ipvsadm -a -t $SNS_VIP:80 -r $SNS_RIP1:80 -g -w 1/sbin/ipvsadm -a -t $SNS_VIP:80 -r $SNS_RIP2:80 -g -w 1touch /var/lock/subsys/ipvsadm /dev/null 2&1 echo ipvsadm starting -OK ; stop) /sbin/ipvsadm -C ifconfig eth0:0 down route del $SNS_VIP rm -rf /var/lock/subsys/ipvsadm /d

4、ev/null 2&1 echo ipvsadm stoped ; status) if ! -e /var/lock/subsys/ipvadm ;then echo ipvsadm stoped - exit 1 else echo ipvsadm Running -OK fi ; *) echo Usage: $0 start|stop|status exit 1 esac exit 0 四 配置web服务器的脚本.#!/bin/bashcase $1 in start) ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $

5、SNS_VIP /sbin/route add -host $SNS_VIP dev lo:0 echo 1 /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 /proc/sys/net/ipv4/conf/all/arp_announce sysctl -p /dev/null 2&1 echo RealServer Start OK ; stop) ifconfig

6、lo:0 down route del $SNS_VIP /dev/null 2&1 echo 0 /proc/sys/net/ipv4/conf/lo/arp_ignore echo 0 /proc/sys/net/ipv4/conf/lo/arp_announce echo 0 /proc/sys/net/ipv4/conf/all/arp_ignore echo 0 /proc/sys/net/ipv4/conf/all/arp_announce echo RealServer Stoped ; *) echo Usage: $0 start|stop exit 1 esac exit

7、0 # chmod +x /usr/local/src/lvs/web.sh #修改成可执行#vi /etc/rc.local#将该脚本写入开机文件/usr/local/src/lvs/web.sh start配置好一台web服务器之后，将配置文件拷贝到第二台服务器。3. 启动lvs-dr脚本和脚本，在DR上可以查看LVS当前状态:rootdr1 /# /usr/local/sbin/lvs-dr.sh startipvsadm starting -OK4. 查看lvs服务是否正常 rootdr1 /# ipvsadmIP Virtual Server version (size=4096)Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConnTCP 19