KeilC与ARM并存方法

1、很多朋友都在想，怎么让 keil C51 与 ARM 能够并存使用。有安装经验的朋友都 知道，安好 C51 后再安 ARm ，C51 不能正常工作； 安好 ARM 后再安 C51 ，ARM 不能正常工作 .网上也有相关解决办法，不过不怎么样，要么不详细，要么就是复制粘贴。不多 说看图片：第一：先安装C51(必须先安装C51，不能先安装 ARM，否则会失败。) 第二：安装 keil ARM( 不能安装在同一个文件夹下 )我当前安装的是 mdk arm4.53第三：打开 keil c51 和 keil arm 两个文件夹，分别找到 tools.ini分别打幵两个 “tools.ini将”eilC5

2、1文件夹下的tools.ini文件中C51段复制到keilARM中tools.ini文件的最后；将keil ARM 文件夹下的tools.ini文件中ARM段复 制到 keil C51 中 tools.ini 文件的最后：tools.ini? ->keil ARMUV2ORGANIZATION=" 小川电子工作室 "NAME=" 小川电子工作室 ", "小川电子工作室 "EMAIL=""ARMSEL=1BOOK0=UV4RELEASE_NOTES.HTM("uVision Release Notes

3、",GEN)ARMPATH="D:Keil ARMARM"VERSION=4.50PATH1="C:Program Filesarm-none-eabi-gcc-4_6"TOOLPREFIX=arm-none-eabi-CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10)# Drivers forARM7/9 devicesCPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TD RV8,TDRV9,TDRV11,TDRV12,TDRV13) # Dri

4、vers for Cortex-M devicesCPUDLL2=SARMCR4.DLL(TDRV7) # Drivers for Cortex-R4 devicesDriverforDriverBOOK0=HLPRELEASE_NOTES.HTM("Release Notes",GEN) BOOK1=HLPARMTOOLS.chm("Complete User's Guide Selection",C) BOOK2=HLPRL_RELEASE_NOTES.HTM("RL-ARM Release Notes",GEN) BOO

5、K3=CMSISindex.html("CMSIS Documentation",GEN) TDRV0=BINUL2ARM.DLL("ULINK2/ME ARM Debugger") TDRV1=BINUL2CM3.DLL("ULINK2/ME Cortex Debugger") TDRV2=BINAGDIRDI.DLL("RDI Interface Driver") TDRV3=BINABLSTCM.dll("Altera Blaster Cortex Debugger") TDRV4=BIN

6、lmidk-agdi.dll("Stellaris ICDI") TDRV5=SignumSigUV3Arm.dll("Signum Systems JTAGjet") TDRV6=SeggerJLTAgdi.dll("J-LINK / J-TRACE") TDRV7=SeggerJL2CM3.dll("Cortex-M/R J-LINK/J-Trace") TDRV8=STLinkST-LINKIII-KEIL.dll ("ST-Link (Deprecated Version)") TDRV

7、9=BINULP2CM3.DLL("ULINK Pro Cortex Debugger") TDRV10=BINULP2ARM.DLL("ULINK Pro ARM Debugger") TDRV11=NULinkNu_Link.dll("NULink Debugger") TDRV12=SiLabsSLAB_CM_Keil.dll("SiLabs UDA Debugger") TDRV13=STLinkST-LINKIII-KEIL_SWO.dll ("ST-Link Debugger") D

8、ELDRVPKG0=ULINKUninstallULINK.exe("ULINK Pro Driver V1.0") LIC0=ZB48T-RRRXD-GJE6P-M4J11-65JI1-GHTPN BOOK4=SignumDocsSigUV3Arm.htm("Signum Systems JTAGjet Documentation",GEN) ARMADSPATH="D:Keil ARMARM" PATH1="BIN40" CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10) #

9、Drivers ARM7/9 devicesCPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TD RV8,TDRV9,TDRV11,TDRV12,TDRV13) # Drivers for Cortex-M devices CPUDLL2=SARMCR4.DLL(TDRV7) # Drivers for Cortex-R4 devices BOOK0=HLPRELEASE_NOTES.HTM("Release Notes",GEN) BOOK1=HLPARMTOOLS.chm("Complete Us

10、er's Guide Selection",C) BOOK2=HLPRL_RELEASE_NOTES.HTM("RL-ARM Release Notes",GEN) BOOK3=CMSISindex.html("CMSIS Documentation",GEN) BOOK4=SignumDocsSigUV3Arm.htm("Signum Systems JTAGjet Documentation",GEN)TDRV0=BINUL2ARM.DLL("ULINK2/ME ARM Debugger")

11、TDRV1=BINUL2CM3.DLL("ULINK2/ME Cortex Debugger") TDRV2=BINAGDIRDI.DLL("RDI Interface Driver") TDRV3=BINABLSTCM.dll("Altera Blaster Cortex Debugger") TDRV4=BINlmidk-agdi.dll("Stellaris ICDI") TDRV5=SignumSigUV3Arm.dll("Signum Systems JTAGjet") TDRV6=S

12、eggerJLTAgdi.dll("J-LINK / J-TRACE") TDRV7=SeggerJL2CM3.dll("Cortex-M/R J-LINK/J-Trace") TDRV8=STLinkST-LINKIII-KEIL.dll ("ST-Link (Deprecated Version)")TDRV9=BINULP2CM3.DLL("ULINK Pro Cortex Debugger") TDRV10=BINULP2ARM.DLL("ULINK Pro ARM Debugger")

13、 TDRV11=NULinkNu_Link.dll("NULink Debugger") TDRV12=SiLabsSLAB_CM_Keil.dll("SiLabs UDA Debugger") TDRV13=STLinkST-LINKIII-KEIL_SWO.dll ("ST-Link Debugger") RTOS0=Dummy.DLL("Dummy")RTOS1=VARTXARM.DLL ("RTX Kernel") DELDRVPKG0=ULINKUninstallULINK.exe(&

14、quot;ULINK Pro Driver V1.0") C51PATH="D:Keil C51C51"VERSION=V9.06BOOK0=HLPRelease_Notes.htm("Release Notes",GEN) BOOK1=HLPC51TOOLS.chm("Complete User's Guide Selection",C) TDRV0=BINMON51.DLL ("Keil Monitor-51 Driver") TDRV1=BINISD51.DLL ("Keil IS

15、D51 In-System Debugger") TDRV2=BINMON390.DLL ("MON390: Dallas Contiguous Mode") TDRV3=BINLPC2EMP.DLL ("LPC900 EPM Emulator/Programmer") TDRV4=BINUL2UPSD.DLL ("ST-uPSD ULINK Driver") TDRV5=BINUL2XC800.DLL ("Infineon XC800 ULINK Driver") TDRV6=BINMONADI.DLL

16、 ("ADI Monitor Driver") TDRV7=BINDAS2XC800.DLL ("Infineon DAS Client for XC800") TDRV8=BINUL2LPC9.DLL ("NXP LPC95x ULINK Driver") RTOS0=Dummy.DLL("Dummy") RTOS1=RTXTINY.DLL ("RTX-51 Tiny") RTOS2=RTX51.DLL ("RTX-51 Full") LIC0=EXTEV-PIY1M-WN

17、1AF-6K3HK-DRA7Y-FBXVW keil->c51 UV2ORGANIZATION=" 小川工作室 "NAME=" 王川北", "111"EMAIL="111"BOOK0=UV4RELEASE_NOTES.HTM("uVision Release Notes",GEN) C51PATH="D:Keil C51C51"VERSION=V9.06BOOK0=HLPRelease_Notes.htm("Release Notes",GEN) B

18、OOK1=HLPC51TOOLS.chm("Complete User's Guide Selection",C) TDRV0=BINMON51.DLL ("Keil Monitor-51 Driver") TDRV1=BINISD51.DLL ("Keil ISD51 In-System Debugger") TDRV2=BINMON390.DLL ("MON390: Dallas Contiguous Mode") TDRV3=BINLPC2EMP.DLL ("LPC900 EPM Emula

19、tor/Programmer") TDRV4=BINUL2UPSD.DLL ("ST-uPSD ULINK Driver") TDRV5=BINUL2XC800.DLL ("Infineon XC800 ULINK Driver")TDRV6=BINMONADI.DLL ("ADI Monitor Driver") TDRV7=BINDAS2XC800.DLL ("Infineon DAS Client for XC800") TDRV8=BINUL2LPC9.DLL ("NXP LPC95x

20、ULINK Driver") RTOS0=Dummy.DLL("Dummy") RTOS1=RTXTINY.DLL ("RTX-51 Tiny") RTOS2=RTX51.DLL ("RTX-51 Full") LIC0=8V02Z-JIX83-09VG9-4M1JI-YKSD6-5KBQ3 ARMPATH="D:Keil ARMARM" VERSION=4.50PATH1="C:Program Filesarm-none-eabi-gcc-4_6" TOOLPREFIX=arm-no

21、ne-eabi- CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10) # Drivers ARM7/9 devicesCPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TD RV8,TDRV9,TDRV11,TDRV12,TDRV13) # Drivers for Cortex-M devices CPUDLL2=SARMCR4.DLL(TDRV7) # Drivers for Cortex-R4 devices BOOK0=HLPRELEASE_NOTES.HTM("Release No

22、tes",GEN) BOOK1=HLPARMTOOLS.chm("Complete User's Guide Selection",C) BOOK2=HLPRL_RELEASE_NOTES.HTM("RL-ARM Release Notes",GEN) BOOK3=CMSISindex.html("CMSIS Documentation",GEN) BOOK4=SignumDocsSigUV3Arm.htm("Signum Systems JTAGjet Documentation",GEN)TD

23、RV0=BINUL2ARM.DLL("ULINK2/ME ARM Debugger") TDRV1=BINUL2CM3.DLL("ULINK2/ME Cortex Debugger") TDRV2=BINAGDIRDI.DLL("RDI Interface Driver") TDRV3=BINABLSTCM.dll("Altera Blaster Cortex Debugger") TDRV4=BINlmidk-agdi.dll("Stellaris ICDI") TDRV5=SignumSig

24、UV3Arm.dll("Signum Systems JTAGjet") TDRV6=SeggerJLTAgdi.dll("J-LINK / J-TRACE") TDRV7=SeggerJL2CM3.dll("Cortex-M/R J-LINK/J-Trace") TDRV8=STLinkST-LINKIII-KEIL.dll ("ST-Link (Deprecated Version)") TDRV9=BINULP2CM3.DLL("ULINK Pro Cortex Debugger") TD

25、RV10=BINULP2ARM.DLL("ULINK Pro ARM Debugger") TDRV11=NULinkNu_Link.dll("NULink Debugger") TDRV12=SiLabsSLAB_CM_Keil.dll("SiLabs UDA Debugger") TDRV13=STLinkST-LINKIII-KEIL_SWO.dll ("ST-Link Debugger") DELDRVPKG0=ULINKUninstallULINK.exe("ULINK Pro Driver V

26、1.0") LIC0=UJWBS-LNGB0-8FWIE-5N2GJ-UKXD9-NTBGM ARMADSforDriverforPATH="D:Keil ARMARM" PATH1="BIN40" CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV10) # Drivers ARM7/9 devicesCPUDLL1=SARMCM3.DLL(TDRV1,TDRV2,TDRV3,TDRV4,TDRV5,TDRV7,TD RV8,TDRV9,TDRV11,TDRV12,TDRV13)# Drivers for Cort

27、ex-M devicesCPUDLL2=SARMCR4.DLL(TDRV7)# Drivers for Cortex-R4 devicesDriverBOOK0=HLPRELEASE_NOTES.HTM("Release Notes",GEN) BOOK1=HLPARMTOOLS.chm("Complete User's Guide Selection",C) BOOK2=HLPRL_RELEASE_NOTES.HTM("RL-ARM Release Notes",GEN) BOOK3=CMSISindex.html("CMSIS Documentation",GEN) BOOK4=SignumDocsSigUV3Arm.htm("Signum Systems JTAGjet Documentation",GEN)TDRV0=BINUL2ARM.DLL("ULINK2/ME ARM Debugger") TDRV1=BINUL2CM3