ddu镍进口采购标准合同文本解读

1、DDU鎳进口采购标准合同文本解读篇一：附一 (4)： DDU镰进口采购标准合同文本 Date： Contract number： This Agreeme nt is ent ered into bet ween Seller and Buyer whereby Seller sells and Buyer purchases the Material on the following terms and conditions： For and on behalf of :Signature：Signature：Name：Name：Title：Title： For and on behalf

2、of Signature：Signature：Name：Name：Title：Title： GENERAL CONDITIONS OF SALE1. DEFINITIONS The following words have the following meanings： "Agreement"the agreement to which theseconditions apply and any appendices thereto； “Buyer” “Material” “ Seller ” the buyer specified in theAgreement；the

3、commodities specified in theAgreement； the seller specified in the Agreement 2. DELIVERY, TITLE AND RISK 2. 1 The 2000 edition of the International Chamber of Commerce official rules for the interpretation of trade terms (Incoterms) are incorporated into the Agreement by reference 2. 2The Mat erial

4、shall be delivered as specifiedin the Agreement. 2. 3 Transfer of risk from Seller to Buyer shall be in accordance with the relevant Incoterm. 3. BANK CHARGES 3. 1 All bank charges for the opening of the L/C shall be for Buyers account, and all other bank charges shall be for Seller， s account. 4. F

5、ORCE MAJEURE 4. 1 Neither party to this contract shall be liable for any delay in performing or failure to perform its obligations due to events of Force Majeure including but not limited to war, blockade, revolution, riot insurrection, civil commotion, strike, lockout, explosion, fire, flood, storm

6、, tempest, earthquake, regulations or orders, including but not limited to prohibition of export or import and/or any other cause or causes beyond reasonable control of the Seller or the Buyer and/or Buyer s receiver whet her or not similar to the causes enumerated above Failure to deliver or to acc

7、ept delivery in whole or in part because of the occurrence of an event of Force Majeure shall not constitute a defauIt hereunder or subject either party to liability for any resulting loss or damage Upon the occurrence of any event of Force Majeure, the par ty affec ted by the eve nt of Force Majeur

8、e shall within 72 (seventy two) hours of occurrence notify the ot her par ty here to in writing of such eve nt and shall specify in reasonable detail the facts constituting such event of Force Majeure Where such notice is not given within the time required, Force Majeure shall not justify the non-fu

9、lfiIlment of any obligations under this contract Both parties agree to use their respective reasonable efforts to cure any event of Force Majeure to the extent that it is reasonably possible to do so. 4. 2 In the event of Force Majeure preventing the Seller from shipping or delivering the material,

10、or preventing the Buyer from accepting such material, respectively, deliveries shall be suspended for the duration of such Force Majeure eve nt but if such Force Majeure shall last more than 90 (ninety) calendar days, the tonnage involved may be cancelled with immediate effect by the party not havin

11、g declared Force Majeure by written notice to the other party. 5. DEFAULT - REMEDIES 5. 1 Delay for opening of L/C In the eve nt Buyer due to reasons wit hin its responsibility fails to open the Letter of Credit on time as stipulated in this Contract, unless the parties agreed on a grace period, Buy

12、er shall pay a penalty to Seller篇二：电解镰 1.什么是电解镰? 电解镰是使用电解法制成的镰。将富集的硫化物矿焙烧 成氧化物，用炭还原成粗镰，再经电解得纯金属镰。在化学 工业中镰用作加氢反应的催化剂。电镀镰是在指在电场的作 用下使离子发生定向迁移沉积成镀层的过程。有良好的导电 性，颜色是黑灰色。镀液除了主盐等主要成分外还要加各种 电镀添加剂和各种助剂，主要是使镀层出光，整平，细化结 晶，防止针孔，促进阴极极化。电解镰主要用于原子能工业、 碱性蓄电池、电工合金、高温高强度合金、催化剂以及粉末 冶金添加剂冶金.金刚石工具、非铁基合金、也可以做化学 反应的加氢催化剂等

13、。包装采用真空袋装，外用铁桶包装。 2、镰的应用领域 3、镰的全球行业消费结构二、中国电解镰市场概况1、我国镰资源量分布 中国国土资源部的最新数据，中国的镰储量为299万吨, 占全球总量6900万吨的4. 2%,位居世界第9位。硫化铜镰矿约占总储量的91%,其余为氧化矿。80%的硫 化镰矿产于甘肃的金川铜镰矿床；中国氧化镰矿主要分布在 四川西南部攀枝花地区以及云南元江地区 2、中国原生镰需求 2007年以来，中国的镰需求量已经上升为世界首位。中国在2010年的镰消费量达到54万吨的水平。但是自给率水 平低，基本维持在50%左右。意味着中国市场五成的镰需要 进口。 导致这一现象的原因主要是占镰消

14、费66%的不锈钢，产 量增长过快。3、中国镰市场的供需状况 根据CRU英国商品研究局的数据2010世界原生牒产量 为140.9万吨，中国产量为31.37万吨，约占全球产量的22. 26%,俄罗斯产量为25. 85万吨，约占全球产量的34%。 中国已经超过俄罗斯成为全球第一大原生镰生产国。4、我 2006年以前我国原生镰的产量基本以电解镰为主，06 年以后随着我国不锈钢产能产量开始急剧扩张，对镰的需求 也越来越大，不但需要大量进口，由民营企业开始，大量使 用红土镰矿冶炼含镰生铁，作为生产不锈钢的原料。5、 我国电解镰消费量和进出口 2007年以来，中国的镰需求量已经上升为世界首位。 中国镰进口来

15、源地主要是俄罗斯、澳大利亚和加拿大； 主要出口目的地为韩国、新加坡以及中国台湾及香港地区。 三、推出电解镰的意义1、打造新型电解镰报价体系实现 价格市场化.透明化优化资源配置 为电解镰国内国际贸易提供价格参考2、构建集中统一 的电解镰现货市场 全新的贸易平台：交割便利，提高市场效率理想的保 值平台：实现企业的平稳运行 5.影响镰价的因素 6、LME镰价走势图 7、电解镰现货价格走势图篇三：电解铜合同范文合同号： This Sale-Purchase Agreement Contract SPAC is entered into this day of2008, between our Prin

16、cipal theSeller and Buyer as follows： 此购销合同与以下买方卖方于2008年月 号签定: WHEREAS:鉴于 A. COMPANY LIMITED hereinafter referred to as theSeller and who with full legal and corporate responsibility, warrant that t hey have reliable sources under legal authority from the rightful owners of a specified quantity and

17、quality of Copper Cathode Pla tes and hereby agree to sell to the BUYER here to the aforesaid quantity and quality of Copper Cathode Plates： A. 企業股份有限公司以下称为卖方，全责的法律与 经济实体，承诺其拥有合法来源的铜板，并同意以上述协议 的数量与质量卖给买方。 Bhereinafter referred to as the Buyer, and who warrarrt that they are capable of purchasing wit

18、h full legal and corporate responsibility, from the SELLER hereto the aforesaid quantity and quality of Copper Cathode Plates, and hereby enter into this SPAC to purchase from the SELLER here to the aforesaid qua ntity and quality of Copper Cathode Plates B.以下称为买方，全责的法律与经济实体，并同意以上 述协议的数量与质量从卖方购买铜板。

19、NOW THEREFORE, both Parties hereto hereby agree to willingly bind and obligate themselves to act and perform as follows：以此双方同意执行下述条款： 1.0 TRANSACTION CODE： Both Parties hereby agree that the Transaction Codeunder this SPAC shall be known and hereby agree thatall coinnunication, correspondences perta

20、ining to thisSPAC shall always bear this Contract No. 1.0交易代码：双方同意此合同下的交易代码即为合同号：，双方并 同意所有关于此合同的交涉，都应与此合同号一致。 2.0 PRODUCT Copper Cathode Plates to LME standard but Non LME registered, Origin : Congo DRC/Zambia Grade : A, 99. 99% purity, minimum 99.96%. Size： 914mm x 914mm x 9mm /-5% Weight： Each pla

21、te 93. 8kg /- 5% Packing： Pallet bounded by metal straps and loaded into 20ft container 以LMA标准但尚未注册的电解铜板 原产地：刚果/赞比亚等级A99. 99%纯度（由SGS检验 可以接受为99. 96%） 尺寸：914mmx914mmx 9mm /-5%包装：用金属带捆绑的货盘，装入20英尺的集装箱 Chemical composition化学成分3.0 QUANTITY Both Par ties hereby agree that the Total Quan tity of Copper Cath

22、ode Plates under the SPAC shall belOOOMT/- 5% spot shipment based on ex-warehouse basisHong Kong Port.Weight for invoicing purposes shallbe by the actual net weight 3.0 数量 双方同意合同总数量为1000公吨，总数量偏差上下不 超过5%,在卖方香港仓库交货。发票金额按实际数量计算。 4. ODELIVERY Stock is available from open warehouse in Hong KongPort and B

23、uyer will be notified 2 two days in advance to come for inspection and payment The Goods will be packed in 20 footer containers in a way that guarantees safety of the Copper Cathodes during transpo rt at ion and which the Seller warra nts are of an acceptable standard to itself. 4.0 交货 这现货即可在香港码头公開仓

24、库运作。卖方会于两天前 会通知买方验货与付款。货品是打包装在20呎货柜内，这 是保证电解铜在运送中的安全方式，同时亦是卖方保证可以 接受的标准。 5.OPRICE Both Parties hereby agree to the following PriceStrueture： USD per metric ton ex warehouse Hong Kong Port 5.0价格双方同意下述价格条款： 每公吨美元FOB香港。6. 0 PAYMENT TERMS Payment will be by bank draft, cashier' s order or TT. Payment instrument must be confirmed received in Sellers account before copper can be delivered or taken out of warehouse 6.0付款方式 付款方式为银行本票，现金汇票或电汇现金，电解铜交 货或移出仓库前卖方必需确认银行已收到货款指示。7.0 INSPECTION SG