烽火10GEPON-OLT-数据配置规范

1、烽火10gepon an5516-01 olt数据配置规范目录登陆烽火our2新增登录口令2配置主机名3olt开局3一、卡授权31、卡授权32、授权指定的卡33、查看卡授权状态： 34、卡去授权4二、设置上联端口、管理vlan、管理ip41、设置上联口41. 1、上联口使能/去使能41.2、上联口属性41.3、显示上联端口信息51. 4lacp使能、查询51.5聚合组配置62、设置管理vlan、管理ip82. 1设置管理vlam、管理ip82.2查询管理vlan、管理ip8三、设置snmp信息91、配置olt设备snmp参数92、酉己置snmp trap接受±也i：止、 端口号93、

2、snmp配置命令行整体导入模板9四、添加静态路由10olt全局业务配置10一、打开 dh卬 option 8101 > dhcp option82 设置102 dhcp option82 设置查询103、dhcp option82 命令彳亍导入模板11二、组播配置111、组播vlan.组播模式配置112、添加组播地址白名单，查询组播地址白名单113、组播配置命令行导入模板11三、线卡互通开关配置121、线卡互通开关打开配置122、线卡互通开关配置查询123、线卡互通开关配置命令导入模板12四、设置pon 口认证模式121、设置p0n 口认证模式122、查询p07 口认证模式123、pon

3、n认证模式命令行导入模板13五、局端外层vlan数据添加141、局端外层vlan数据添加142、查询局端外层vlan数据143、外层局端vlan配置命令行导入模板14六、vlan添加端口151、vlan添加端口配置152、vlan添加端口查询153、vlan添加端口命令行导入模板15七、ngn上联接口16八、oltqinq域161、qinq模板配置162、qhq模版配置查询163、qinq模板配置命令行导入模板18九、qinq模板绑定/去绑定pond191、qinq模版绑定/去绑定pon 口192、pon 口 qinq 模板查询193、qtnq模板绑定pon 口命令行导入模板19单用户开通手工

4、配置20单板卡扩容olt数据配置21登陆烽火olttelnet x.x.x.x （x.x.x.x olt 管理 ip）login:gepon/用户名大写 gepon password:*/密码大写 geponmasteruser> enpassword: */用户名大写en/密码大写geponadmi n#新增登录口令新增登录口令:zjadmin login-password zj0511admin# cd aaaadminaaa# user add三.adminaaa# user role zjadmin admin enable-password zj0511 查询登录用户名：adm

5、in# user list删除登录名：admin# user delete <username配置主机名配置主机名:admin#hostname <hostnameexample:admin#hostnamezjdll-fh10g-olt0001zjnm-fhlog-oltoool#olt开局k卡授权admin#set card_all_auth 所有卡授权2、授权指定的卡admin#set card_auth slot <slotno> type <card_type>admin#set card_auth slot 1 type xg8a 烽火logep

6、on的板卡类型为xg8aadmin# showcardan5116-06b/an5516-01cardexistconfigdetect1yesxg8axg8a2yesxg8axg8a3456789yeshswahswa10yeshswahswa11 detail card /槽位号match exist/物理槽位是否插卡match config网管配置的卡类型- detect/网管检测的卡类型- detail 网管检测的卡类型与网- 管配置的卡类型是否匹配match/m m/ 主用match/s s/备用1213141516171819yeshu2ahu2a20yeshu2ahu2a21ye

7、sfanfan24yespwrpwr25yespwrpwr801matchmatchmatchmatchmatchcurrent temperature is 39 c.power 1 and power 2 are on.fan 1 speed is 1.subframe type is 06b/an5516-01.admin#4、卡去授权admin#set card_unauth slot <slotno>|all 所有卡去授权/单槽位卡去授权二、设置上联端口、管理vlan、管理ip1、设置上联口1.1、上联口使能/去使能admininterface#set uplink sl

8、ot <slotno> port <portno> enable | disableadmin# cd interfaceadmininterface#set uplink slot 19 port 1 enable /19:1 端 口使能admininterface#set uplink slot 20 port 1 disable /20:l 端 口 去使能/上联盘槽位为19、20端口号为12、上联口属性admini nterface#set upli nk slot <slot no> port <port no> auto _n egot

9、iatio n enable | disable speed 10m 1100m 11000m 110000m duplex full | half <slotno>/ 槽位号<port no>端口号 auto_negotiation enable | disable / 自适应使能/去使能speed 10m 1100m 11000m 110000m 速率 10m 1100m 11000m 110000mduplex full|half/双工 全双工/半双工admin'interface#set uplink slot 19 port 1 auto_negoti

10、ation disable speed 10000m duplex full/19:1端口强制10000m全双工1.3>显示上联端口信息admindevice#show uplink port all 查询所有上联端 i i 状态admin# cd deviceadmindevice#show uplink port alladmindevice#show uplink slot <slotno> port <portno>查询貝体上联端 口状态admindevice#show uplink slot 19 port 1查询19:1上联端口状态1. 4lacp使能

11、、查询adminprotocollacp# set lacp enable | disable / 上联端口 lacp 使能/去使能admin# cd protocoladminprotoco# cd lacpadminprotocollacp#set lacp enableadminprotocollacp# show lacp channel-group trunks/查询所有上联trunk组lacp状态adminprotocollacp# show lacp channel-group trunkslacp group state information is:group id: 1mo

12、de: lacpsystem priority: 32768system id: 34bf-9074-aelfpriority preemption: disableactorportnamestatus17select23selectactorportnamesyspriportstate173276850x3d233276850x3dportpri port key portstate3276810x3d3276810x3dsystem idportpri portnoportkey84d9-31e6-e24b3276831084d9-31e6-e24b327683790group id:

13、 2system priority: 32768mode: lacpsystem id: 34bf-9074-aelfpriority preempt!on: disableactorportname2026statusportpri portkey portstateselect3276820x3dselect3276820x3dactorportnamesyspriportstate203276880x3d263276880x3dsystem idportpriportnoportkey84d9-31e6-e2553276845384d9-31e6-e255327683933adminpr

14、otocollacp#1. 5聚合组配置admininterface# create trunk <id>创建 trunk 组 (id 组号 )admini interface# set trunki ng group no vl6> mode static | lacp设置trunk组类型 静态/lacpadmininterface# set trunk <16> max-member-num设置trunk组最大成员数1-12admin'interface# add trunk <id> slot <slotno> port &l

15、t;portno>添加trunk组成员admininterface# show trunk all查询所有trunk组信息admin'interface# show trunk <trunkid>查询具体trunk组信息admininterface# create trunk 1 创建 turnk 组 1admininterface# set trunking groupno 1 mode lacp /设置 trunk 组 1 类型为 lacpadmininterface# set trunk 1 max-member-num 6设置 trunk 组 1 最大成员数为

16、 6admininterface# add trunk 1 slot 19 port 1 添加 19： 1 至lj trunk 组 1admininterface# add trunk 1 slot 20 port 1 添加 20： 1 到 trunk 组 1admininterface# show trunk 1 查询 trunk 组 1 信息trunk 1 info :portld(option):19:l 20:1.master_port 19:1,trunk_mode : lacptrunk psc : src and dst macauto_negotiation : disable

17、duplex : fullflow switch : disablemacjearning_switch : enablepri_enable : disablepriority 0 :speed 3:wan_lan_ mode 1:work_mode 0 : jumbo_frame 0 : admini nterface #admininterface# show trunk all 查询所冇 trunk 组信息 trunk 1 info :portld(opti on ):19:1 20:1 master_port 19:1,trunk_mode : lacptrunk psc : src

18、 and dst macauto_negotiation : disableduplex : fullflow_switch : disablemacjearning_switch : enablepri_enable : disablepriority 0 :speed 3:wan_lan_ mode 1: work_mode 0 : jumbo_frame 0 : trunk 2 info : portld(option):19:4 20:4 .master_port 19:4,trunk_mode : lacptrunk psc : src and dst macauto_negotia

19、tion : enable duplex : half flow_switch : disable macjearning_switch : enable pri_enable : disable priority 0 :speed 0:wan_lan_ mode 1: work_mode 0 : jumbo_frame 0 : trunk 3 info : portld(option):.trunk 4 info : portld(option):.trunk 5 info : portld(opti on):.trunk 6 info :portld(option):.admini int

20、erface#2、设置管理vlan、管理ip2.1设置管理vlan、管理ipadminservice #set man age vlan n ame vn ame> vid <l-4095> in putport <portlist> untagged | taggedadminservice#set manage vlan name <name> ip <a.b.c.d/m><a.b.c.d>*1adminservice# et man age vlan n ame zjnm-fhiog-oltoooi vid 50 in p

21、utport 19： 1 tagged南门局点 管理vlan为50上联端口 19： 1(19： 1默认为trunk 1的主用端口)adminservice #set man age vlan n ame zjnm-fhiog-oltoooi ip 9.100.21.149/30(9.100.21.150)(设置的网关ip将自动转换成一条默认静态路由)管理 ip 9.100.21.149 掩码 255.255.255.252 网关 9.100.21.1502. 2查询管理vlan、管理ipadminservice#show manage_vlan all /查询管理 vlan 管理 ip 信息a

22、dminservice# show manage_vlan allman age vlan: 50, name: man agevlan 50:port(tag|utag):trunk:l tdevice: sub unit: 50ethernet address: 34:bf:90:74:ae:lftotal protocols:0inet: 9.100.21.149mask: 255.255.255.252rx packets: 0 tx packets: 376285rx bytes: 0 tx bytes: 165319730mtu: 1492adminservice #三、设置snm

23、p信息1、配置olt设备snmp参数adminservice# set snmp community readonly xxxxxxxx只 读 团体名adminservice# set snmp comm unity readwrite xxxxxxxx/读写 团体名adminservice # show snmp comm unity 查询 snmp 读写口令adminservice# set snmp community readonly zj511_ro 读 口 令 zj511_roadminservice#setsnmp community readwrite js511_rw/ 写口

24、令 js511_rwadminservice# show snmp community / 查询读写 口令read-only comm unity string is :zj511_roread-write comm unity string is :js511_rwadminservice #2、配置snmp trap接受地址、端口号adminservice# service snmp trap enableldiable / snmp trap 使能/去使能 adminservice #adminservice#set snmp trapreceiver add x.x.x.x versi

25、on v2c community public signaltrace_switch disable 设置 snmp trap 接收地址adminservice#set snmp trapreceiver ip x.x.x.x port id 设置 snmp trap 端 口adminservice# service snmp trap enable /snmp trap 使能adminservice#set snmp trapreceiver add 10.205.24.230 version v2c comm unity public signaltrace_switch disable设

26、置 snmp trap 接收地址 10.205.24.230 adminservice#set snmp trapreceiver ip 10.205.24.230 port 162 设置 snmp trap端口号为162adminservice# show snmp trapreceiver/ 查询 snmp trap 信息snmp age nt trap is up.ip addresssignaltrackingauthe ntication-level:ffff:10.205.24.230v2c:ffff:202.102.4.162v2ctotal 2 trapreceiver ip

27、address in system.version comm unityportpublic162disablepublic162disableadminservice#3、snmp配置命令行整体导入模板adminservice #set snmp comm unity readwrite js511_rwset snmp community readonly zj511_ro service snmp trap enableadd snmp trap_map id 1 ip_address :ffff:10.205.24.230add snmp trap_map id 2 ip_addres

28、s :ffff:202.102.4.162set snmp trapreceiver add :ffff:10.205.24.230 version v2c community public signaltrace_switch disableset snmp trapreceiver add :ffff:202.102.4.162 version v2c comm unity public signaltrace_switch disableset trap :ffff:10.205.24.230 version privformatset trap :ffff:202.102.4.162

29、version privformatset snmp trapreceiver ip :ffff:10.205.24.230 port 162set snmp trapreceiver ip :ffff:202.102.4.162 port 162set snmp trap sendlen 1100 autoconfirmswitch disable sendrepeatnumber 18u!添加静态路由adminservice# add static route destination 0.0.0.0 gateway x.x.x.x mask 0.0.0.0 添加静态路由adminservi

30、ce# show static route 杳询静态路由列表olt全局业务配置v打开dhcpoption1、dhcp option82 设置admindevicecircuitid#set circuitjd format cnclctc 线路标识格式 电信为 etc admindevicecircuitid#set dhcp option82 enbleldisable / 线路标识管理开关、admin#admin# cd deviceadmindevice# cd circuitidadmindevicecircuitid# set circuitjd format etc / 线路标识格

31、式电信采用 ctcadmindevicecircuitid# set dhcp option82 enable / 线路标识管理开关2、dhcp option82 设置查连admindevicecircuitid# show dhcp state 查询线路标识管理状态 admindevicecircuitid# show circuitd format 查询线路标识格式admindevicecircuitid# show dh卬 state / 查询线路标识管理状态 dhcp option82 : enableddhcp optionl8 : disableddhcp option37 : d

32、isabledepon dhcp patch: disabledepon arp patch: disabledadmindevicecircuitid# show circuitjd format 查询线路标识格式 circuit id format: ctc standardadmindevicecircuitid #3. dhcp option82命令行导入模板admindevicecircuitid # set circuitjd format etc set dhcp option82 enable二、组播配置1、组播vlan、组播模式配置adminprotocoligmp#set

33、igmp vlan 40 配置组播 vlan 为 40adminprotocoligmp#set igmp stack v2 设置组播协议版本为 v2adminprotocoligmp#set igmp mode proxy-proxy 设置 olt 组播为代理模式2、添加组播地址白名单，查询组播地址白名单adminprotocoligmp#add onu_group_white_list grp_begin x.x.x.x grp_end x.x.x.x /添加组播地址白名单adminprotocoligmp# show onu_group_whitejist 杳询组播地址白名单adminp

34、rotocoligmp# show onu_group_whiteistitem12345ip-ra ng239.49.0.1-239.49.0.255239.49.1.1- 239.49.1.255239.49.8.1- 239.49.8.255239.49.9.1- 239.49.9.255239.252.152.1- 239.252.152.255adminprotocoligmp #3、组播配置命令行导入模板组播配置组播vlan 40组播协议版本：v2模式：代理代理adminprotocoligmp#set igmp vlan 40set igmp stack v2set igmp m

35、ode proxy-proxyset igmp dynamic_vlan disableset igmp-ssm ip-range 232.0.0.0/8添加组播地址白名单ad m i np rotoco ligm p#add onu_group_white_list grp add onu_group_white_list grp add onu_group_white_list grp add onu_group_white_list grp add onu_group_whitejist grpbegin 239.49.0.1 grp_end 239.49.0.255begin 239.

36、49.1.1 grp_end 239.49.1.255begin 239.49.8.1 grp_end 239.49.8.255begin 239.49.9.1 grp_end 239.49.9.255begin 239.252.152.1 grp_end 239.252.152.255三、线卡互通开关配置1、线卡互通开关打开配置admincard#setpon_interconn ection_switch slot<soltno>switch enableldisableunion_interconnect_switch enableldisable / 某槽位 pon 互通开

37、关使能/去使能联通互 通开关使能/去使能admincard#set pon_interconnection_switch slotlswitch enable union_interconnect_switch disable 槽位pon互通开关使能，联通互联互通开关去使能2线卡互通开关配置查询admincard# show pon_interconnect_switch slot <soltno> 查 询线卡互通>1犬态admincard# show ponnterconnect_switch slot 1 pon interconnection switch is ena

38、ble!union interconnection switch is disable!admincard#3.线卡互通开关配置命令导入模板to1槽位pon互通开关使能，联通互联互通开关去使能admincard#set pon interconnection switch slot 1 switch enable union interconnect switch disable1、设置pon 口认证模式admincard# set pon_auth slot <slotno> ponvponno> mode phy_id/loidlloidl phyjd /某槽位某p3n

39、口认证模式为物理标识/逻辑混合认证模式、题辑认证、 物通标识认证admincard#set pon_auth slot 1 pon 1 mode phyjd/loid设置1槽位1pon 口物理标识/逻辑混合认证模式2、查询p0n 口认证模式admincard# show pon_auth select slot <slotno> pon vponno>查询具体槽位具体pon 口认证模式admincard# show pon_auth all查询全部pon 口认证模式admincard# show pon_auth select slot 1 pon 1 杳询 1 槽位 1po

40、n 认证模式 slot 1 pon 1 ,auth mode is physical id or logical id or physical password.admin card#admincard# show pon_auth all / 查询全部 pon 认证模式pon auth, item=16slot 1 pon 1 ,authmodeis physicalidor logicalidor physical password,slot 1 pon 2 ,authmodeis physicalidor logicalidor physical password,slot 1 pon

41、3 ,authmodeis physicalidor logicalidor physical password,slot 1 pon 4 ,authmodeis physicalidor logicalidor physical password,slot 1 pon 5 ,authmodeis physicalidor logicalidor physical password,slot 1 pon 6 ,authmodeis physicalidor logicalidor physical password,slot 1 pon 7 ,authmodeis physicalidor l

42、ogicalidor physical password,slot 1 pon 8 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 1 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 2 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 3 ,authmodeis physicalidor logicalidor physical password

43、,slot 2 pon 4 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 5 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 6 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 7 ,authmodeis physicalidor logicalidor physical password,slot 2 pon 8 ,authmodeis ph

44、ysicalidor logicalidor physical password.admincard #3> pon 口认证模式命令行导入模板1槽位8个pon认证模式全部设定为物理标识/逻辑混合认证模式admincard#set pon_auth slot 1 pon 1 mode phyjd/loid set pon_auth slot 1 pon2 mode phyjd/loid set pon_auth slot 1 pon3 mode phyjd/loid set pon_auth slot 1 pon4 mode phyjd/loid set pon_auth slot 1 p

45、on5 mode phyjd/loid set pon_auth slot 1 pon6 mode phyd/loid set pon_auth slot 1 pon7 mode phyjd/loid set pon_auth slot 1 pon8 mode phyjd/loid五、局端外层vlan数据添加1、局端外层vlan数据添加adminvlan#create service_vlan 101 创建第一条adminvlan#set service_vlan 101 data type data/设置第一个vlan的名称为data类型为dataadminvlan#set service_

46、vlan 101 vlan_begin 201 vlan_end 300 设置第一个vlan的范围为201到3002、查询局端外层vlan数据adminvlan# show service_vlan all 查询所有局端外层 vlanadminvlan# show service_vlan allservicevla nnametypevlanbegi nvlanend101datadata201300102iptviptoipvoip26012700104zhuanxiandata16991699105yuyinngn26012700106zuboiptv4040a

47、dminvla n#3、外层局端vlan配置命令行导入模板1、宽带外层 vlan 201-3002、itv 外层 vlan 1801-19003、voip 外层 vlan 2601-27004、专线外层vlan 16995、语音外层 vlan 2601-27006、组播 vlan 40create service_vlan 102set service_vlan loldata type dataset service_vlan 101 vlan_begin 201 vlan_end 300 create service_vlan 102set service_vlan 102iptv typ

48、e iptvset service_vlan 102 vlan_begin 1801 vlan_end 1900 create service_vlan 103set service_vlan 103voip type voipset service_vlan 103 vlan_begin 2601 vlan_end 2700 create service_vlan 104set service_vlan 104 zhuanxian type dataset service_vlan 104 vlan_begin 1699 vlan_end 1699 create service_vlan 1

49、05set service_vlan 105yuyin type ngnset service_vlan 105 vlan_begin 2601 vlan_end 2700 create service_vlan 106set service_vlan 106zubo type iptvset service_vlan 106 vlan_begin 40 vlan_end 40六、vlan添加端口1、vlan添加端口配置adminvlan# add vlan vlan_begin 40 vlan_end 40 tag trunk 1adminvlan#add vlan vlan_begin 4

50、0 vlan_end 40 tag allslot 02、vlan添加端口查询adminvlan# show port_vlan port_type 1 agid 1/ 查询端口 vlan 信息 / port_type id l-port_trunk trunk 组/agid id trunk 组号adminvlan# show port_vlan port_type 1 agid 1trunk 1:vlan (optin):40 40(t).50 50(t).301 400(t).1901 2000(t).2701 2800(t).adminvla n#3、vlan添加端口命令行导入模板1、

51、宽带外层 vlan 201-3002、itv 外层 vlan 1801-19003、voip 外层 vlan 2601-27004、专线外层vlan 16995、语音外层 vlan 2601-27006、组播 vlan 407、管理 vlan 50add vlan vlan add vlan vlan add vlan vlan add vlan vlan add vlan vlan add vlan vlanbegin 40 vlan_end 40 tag trunk 1begin 50 vlan_end 50 tag trunk 1begin 201 vlan_end 300 tag tr

52、unk 1begin 1801 vlan_end 1900 tag trunk 1begin 2601 vlan_end 2700 tag trunk 1begin 1699 vlan_end 1699 tag trunk 2add vlan vlanbegin 40 vlan_end 40 tag allslot 0add vlan vlanbegin 50 vlan_end 50 tag allslot 0add vlan vlan_begin 1699 vlan_end 1699 tag allslot 0add vlan vlan_begin 1802 vlan_end 1900 ta

53、g allslot 0add vlan vlan_begin 2601 vlan_end 2700 tag allslot 0七、ngn上联接口adminonungn#set new_ngn_uplink_interface name yuyinngn protocol_typeh. 248 mgc 1 5.0.169.134 2944 mgc 2 10.14.132.69 2944 m_dns ipv4 0.0.0.0 s_dns ipv4 0.0.0.0八、olt qinq 域i、qinq模板配置adminqinq#cre oltqinq 3_1 创建 qinq 域，名称为：3_1adminqinq#set oltqinq3_l serv 7创建 qinq 域 3_1 的 vlan 规则条目数（最大 为8）adminqinq#set oltqinq3_l 1 up 7 128 4 7 1051 3 servl （第一条）创建 qinq 域 3_1 内层 vlan 为 128-1051adminqinq#set oltqinq 3_11 down 6 217 1 创建 qinq 域 3_1 外层 vlan 为 21