英文科研论文写作简介写作部分

1、英文科研论文写作简介写作部 分英文科研论文写作简介1.引言果的关键是选题。英文论文写作的前提是有创新研究成果，创新研究成uAn acceptable primary scientific publication must be “thefirst disclosu.科研论文写作常出现的一个误区是：以为好论文是“写”出来的，只要会写，论文总能被接受发表。其实，论文被发表只是结果，这个结果是和一系列科研环节密切相关的，论文写作只是其最后一个环节。在选择科研课题和工作切入点时，就需特别注意，一定要有 创新内容，科学研究的灵魂是创新，重复别人的工作，从科研的角度来说，是没有意义的。值得注意的是，阅读有

2、关英文科技论文，不仅可以了解研究进展和动态， 而且，可以学会科技英文表达。同样，选题很好，研究 工作做得不够细致、深入，也难有说服力，难以成为有 价值的研究工作。由于本书只介绍英文科研论文的写作, 不讲如何做研究，因此只介绍有了好的研究成果后如何 写成合格的科研文章。The goal of scientific research is publication. Scientists, starting as graduate students, are measured primarily not by their dexterity in laboratory manipulations,

3、not by their innate knowledge of either broad or narrow scientific subjects, and certainly not by their wit or charm; they are measured, and become known (or remain unknown) by their publications.A scientific experiment, no matter how spectacular the results, is not completed until the results are p

4、ublished.Thus, the scientists must not only “do” the science but must “write science. Bad writing can and often does prevent or delay the publication of good science.2.科研论文的一般格式。科研论文，不象散文、小说那样形式可以千姿百态,而具有较为固定的格式。从某种意义上说，科研论文是“八月The IMRAD format.What question (problem) was studied? The answer is the

5、Introduction. How was the problem studied? The answer is the Methods. What were the findings? The answer is the Results. What do these findings mean? The answer is the Discussion.其通常的组成和每部分的特点见表lo表1科研论文格式及其特点组成部分名称特点或简要说明（按文章顺序）题目Title10-20 words简明，不必求全。Brief. A complete sentence is not necessary.作者

6、信息单位地址 联系方式: 地址、E-mail传真、电话。AuthorshipNames of authors AfflliationEmail address and telephone and fax numbers for corresponding author, if possible.通讯作者：往往是固定研究人员或项目负责人。Correspondingauthor:Faculty member or principal investigator.4摘要Abstract关键词Key words150-200英文词，说明研究目 的、方法、结果、结论和意义。 可以写一些定量结果。不仅对 读

7、者，而且对文献检索者都有 帮助。150-200 words to give purpose, methods or procedures, new results and their significance, and conclusions. Write for literature searchers as well as Journal readersInclude major quantitative data if they can be stated briefly, but do not include background material35个关键词，作为论文检索 用，使读者

8、可用关键词方便检 索到此论文，并对论文按内容 分类。3-5 key words which can be regarded as index words.符号表Nomenclature,Notation or Symbols说明文章中符号表示的量的意 义，单位。尽量用国际单位制。 Use SI units as much as possible.引言Introduction篇幅：全文的10-20 % o 说明所研究问题的重要性；相 关研究回顾与综述：指出已有 研究的不足和局限，但语气应 友善而含蓄。说明本论文的目 的和重要性。Introduce the importance of the pr

9、oblem studiedReview of previous work.State the limitations or shortcomings of the previous work Clearly state the purpose and significance of the present work Notice:Do not attempt to survey the literature completely. If a recent article has a survey on the subject, cite that article without repeati

10、ng its individual citations.In general, the Introduction shoyld be no more than 3 double-spaced word-processed研究或实验方法Research approach Theoretical section or Experimental section篇幅：全文的20-30% o介绍为简化问题所作的必要且 合理的假设；对问题进行数学描述：列方程、 边界条件和初始条件；问题求解；使读者阅读后可重复实验。Make necessary assumptions.Describe the proble

11、m in69mathematicalequationstogether with relating boundary and initial conditions.Obtain the solution.Let the research can be reproduced -Describe the apparatus and instruments Describe pertinent and critical factors involved in the experimental work.结果和讨论Resultsanddiscussion篇幅：全文的40%左右。 研究结果介绍，数据的必

12、要解 释，新发现讨论，与其它相关 结果的比较。结果和讨论也可分开。 结果：直接的发现；讨论：间 接的发现。此部分内容安排要特别注意逻 辑性。Present the resultsDiscuss new flndings.Provide explanations for data Elucidate models.Compare the results with other related works.Results and Discussion may be separated.Results: direct flndings Discussion: indirect findings Not

13、ice:pleaselogicallyarrange the contents结论Conclusions介绍研究工作的主要结论。力 求简明。Summarize conclusions of thework 致谢Acknowledgements说明本工作受到的资助及得到 的帮助。Information regarding the supporter (s) (eg，flnancial support) is included here.参考文献References对于一般科研论文，参考文献 为10-20篇;对于综述性论文， 参考文献为60100篇。10-20 references for res

14、earch paper and 60-100 references for review paper.附录一些公式的详细推导等内容可 放在附录部分，以便使论文更Appendix紧凑。Some detailed derivation of equations etc. could be placed in this part.以上为英文科技论文的一般要求，不同期刊风格和要求会有所不同。 练习lo2.科技论文的写作步骤步骤及注意事项如同绘画。绘画要构思、画轮廓、再描绘、收拾。科技论文的写作步骤见表2。表2英文科技论文写作步骤准备材料确定题目写提纲和指导老师讨论。安排和调整材料写论文草稿和指导老师讨

15、论。认真检查：内容、 炼字、炼句请指导教师修改在有条件的情况下请Native English speaker 修改英文。值得注意的是，论文最好在研究工作进行中就开始酝酿，这样对研究本身的完整性会有帮助，而且，写作 过程中也往往会发现一些问题，由于实验装置尚在，实验还可进行，这些问题还可方便解决。 练习2。3. 各部分写作的注意事项3.0如何写论文题目First impressions are strong impressions; a title ought therefore to be well studied，and to give, so far as Its limit permit

16、，a definite and concise indication of what is to come.T. Cliffort AllburtWhat is good title? I define it as the fewest possible words that adequately describe the context of the paper.3.1如何写英文摘要英文摘要是全文的浓缩，一般包括研究目的、研究方 法、研究结果和结论。摘要是全文的摘要，因此论文从 引言(Introduction) 论文展开(Approach),结果 (Results)和讨论(Discussio

17、n)以及结论部分的要点在 引言中都应有反映。摘要部分应尽可能简明，一般不超 过300个词，摘要比论文具有更广泛的读者，因此，尽 量用通俗和易懂的词汇(这些词汇无需通过阅读全文或 査相关文献后就可明白)，且风格、时态等应统一。在 英文摘要中，时态可以是一般现在时，一般过去时和现 在完成时，具体用何种时态，应根据表达的内容而定， 但一般多用被动语态。请看下面的例1 一例7o注意， 摘要中别忘了写出论文的主要发现或结论。一般情况下，摘要中不列参考文献，不含图表。英文 摘要内容完整，可独立存在。摘要虽在最前面，但实际 上，它往往最后写。等全文完成后，再根据全文的内容 提炼和推敲。当然，有些国际会议，开

18、始只需要提交摘要，这时，摘要常常先写。F面列举了几篇国际期刊论文的英文摘要，供读者参考。同时注意缩写字的使用。 摘要例卩Abstract:Interactions between volatile organiccompounds (VOCs) and vinyl flooring (VF)，a relatively homogenous, diffusion-controlled building material, were characterized The sorption/desorption behavior of VF was investigated using single-

19、component and binary systems of seven common VOCs ranging in molecular weight from n-butanol to n-pentadecane. The simultaneous sorption of VOCs and water vapor by VF was also investigated Rapid determination of the material/air partition coefficient (K) and the material-phase diffusion coefficient

20、(D) for each VOC was achieved by placing thin VF slabs in a dynamic microbalance and subjecting them to controlled sorption/desorption cycles K and D are shown to be independent of concentration for all of the VOCs and water vapor. For the four alkane VOCs studied, K correlates well with vapor press

21、ure and D correlates well with molecular weight, providing a means to estimate these parameters for other alkane VOCs.While the simultaneous sorption of a binary mixture of VOCs is non-competitive, the presence of water vapor increases the uptake of VOCs by VF. This approach can be applied to other

22、diffusion-controlled materials and should facilitate the prediction of their source/sink behavior using physicallybased models.Keywords: Building material; Emission; Indoor air; Microbalance; Sink; Sorption摘要例221Abstract： Desiccant systems have been proposed as energy saving alternatives to vapor co

23、mpression air conditioning for handling the latent load. Use of liquid desiccants offers several design and performance advantages over solid desiccants, especially when solar energy is used for regeneration For liquid-gas contact, packed towers with low pressure drop provide good heat and mass tran

24、sfer characteristics for compact designs. This paper presents the results from a study of the performance of a packed tower absorber and regenerator for an aqueous lithium chloride desiccant dehumidification system The rates of dehumidification and regeneration, as well as the effectiveness of the d

25、ehumidification and regeneration processes were assessed under the effects of variables such as air and desiccant flow rates, air temperature and humidity, and desiccant temperature and concentration. A variation of the Oberg and Goswami Mathematical model was used to predict the experimental flndin

26、gs giving satisfactory results.摘要例33Abstract： This paper presents a performance evaluation of two passive cooling strategies, daytime ventilation and night cooling, for a generic, six-story suburban apartment building in Beijing and Shanghai. The investigation uses a coupled, transient simulation ap

27、proach to model heat transfer and airflow in the apartments Wind-driven ventilation is simulated using computational fluid dynamics (CFD). Occupant thermal comfort is accessed using Fangers comfort model. The results show that night cooling is superior to daytime ventilatio n Night cooling may repla

28、ce air-conditioning systems for a signifleant part of the cooling season in Beijing，but with a high condensation risk For Shanghai, neither of the two passive cooling strategies can be considered successful.摘要例44abstract： This paper presents the results of a computer program developed for solving 2-

29、 and 3-D ventilation problems. The program solves, in finite difference form, the steady-state conservation equations of mass， momentum and thermal energy. Presentation of the fluctuating velocity components is made using the k- turbulence model. Predicted results of air velocity and temperature dis

30、tribution in a room are corroborated by experimental measurements The numerical solution is extended to other room ventilation problems of practical interest 3 2如何写引言中国唁句俗话：好的开头等于成功的一半。英文中有 句名言：A bad beginning makes a bad ending。两 者表达方式不同，意思却相近：开头对很多事非常重要, 对写文章也不例外。引言即是文章的开头。写作之前，心中需对阅读对象有所了解和估计，这样

31、在行文时对遣词造句就会有把握，既避免过于专业，使 读者难以理解，又不致过于平白，让读者索然无味。引言一般用一般现在时写，如前所述，引言中应介绍 以下几方面的内容：(1) 介绍讨论的问题、介绍研究的背景，说明讨论的范围及解决问题的重要性。读者往往通过浏览论文 题目、摘要、引言、图标和结论决定是否仔细阅读全文。因此，在引言中应开门见山，说明要讨论的 问题及其重要性。(2) 相关研究回顾与综述。对已有研究的评价要实事求是，对前人工作的精彩和可参考之处应简要说明，对已有研究的不足和局限，也应指出，但语气 应友善而含蓄。(3) 说明本研究的目的和特别之处。有了前面2部分 的铺垫，现在就要具体说明本研究要

32、解决什么问 题，在解决思路、方法、手段等上有什么新颖或改 进之处。(4) 说明一下文章安排。是全部论文的导读。就像领人去一个地方游览或参观，先介绍一下游览的活动 安排并给一张游览地的地图。在这部分，下面的表 述可供参考：This paper is divided into five major sections as follows.Section one of this paper opens with.Section three develops the second hypothesis on.Section four shows (introduces, reveals, treats

33、, develops，deals with，etc*).The result of . is given in the last section.(5) 介绍一下主要结论。(4)和 的安排比较灵活，有时可不同时出现， 甚至不出现，只介绍(3) 一本论文的目的或主要贡献及 其重要性。关于引言的功能，Raleigh Nelson有一段形象的介 绍:“ (it) may be thought of as a preliminary conference in which the writer and prospective reader cgo into a huddle9 and agree in

34、 advance on the exact limits of the subject, the terms in which to discuss it，the angle from which to approach it，and the plan of treatment that will be most convenient to both.引言部分逻辑性很强。首先当然是点出问题，并使 读者一下被吸引。这就必须交代为什么你选择该问题， 该问题的解决状况如何，还有那些问题需要研究，你如 何解决这些问题，得到了哪些有意义的结果。这些环节 联系紧密、环环相扣。引言中要引用已发表的相关文献，

35、一般有两种引出方式：按所引文献出现的先后顺序标注，按所引文献作 者的姓名的字母顺序标注。具体方式，视所投期刊要求 而定。下面通过一些例子对上面的介绍加以说明。例 11:INTRODUCTIONA variety of building materials (eg，adhesives, sealants, paints, stains, carpets, vinyl flooring, and engineered woods) can act as indoor sources of volatile organic compounds (VOCs). Following their inst

36、allation or application, these materials typically contain residual quantities of VOCs that are then emitted over time. Once installed and depending upon their properties, these materials may also interact with airborne VOCs through alternating sorption and desorption cycles (Zhao et al，1999b，2001).

37、 Consequently，building materials can have a signifleant impact on indoor air quality both as sources of and sinks for volatile compounds.Current methods for characterizing the source/sink behavior of building materials typically involve chamber studies. This approach can b time-consuming and costly，

38、and is subject to several limitations (Little and Hodgson, 1996). For those indoor sources and sinks that are controlled by internal diffusion processes, physically-based diffusion models hold considerable promise for prediction emission characteristics when compared to empirical methods (Cox et al，

39、2000b， 2001b).The key parameters for physically-based models are the material/air partition coefficient (K)，the material-phase diffusion coefficient (D)，and, in the case of a source, the initial concentration of VOC in the material (Co) Rapid and reliable determination of these key parameters by dir

40、ect measurements or by estimations based on readily available VOC/building material properties should greatly facilitate the development and use of mechanistic models for characterizing the source/sink behavior of diffusion-controlled materials (Zhao et al，1999a; Cox et al，2000a, 2001a).Several proc

41、edures have been used to measure D and K of volatile compounds in building materials. D and K have been inferred from experimental data obtained in chamber studies (Little et al.9 1994). A procedure using a two-compartment chamber has also been used for D and K measurement. A specimen of building ma

42、terial is installed between the two compartments A concentration of a particular compound if introduced into the gas-phase of one compartment while the gas-phase concentration in the other compartment is measured over time. D and K are then indirectly estimated from gas-phase concentration data (Bod

43、alal et al，2000; Meininghaus et al，2000). A complicating feature of this method is that VOC transport between chambers may occur by gas-phase diffusion through pores in the building material in addition to solid-phase Fickian diffusion, confounding estimates of the mass transport characteristics of

44、the solid materialA procedure based on a European Committee for Standardization (CEN) method has also been used to estimate D. A building material sample is tightly fastened to the open end of a cup containing a liquid VOC. As the VOC diffuses from the saturated gas-phase through the building materi

45、al sample, cup weight over time is recorded. Weight change data can be used to estimate D(kirchner et al，1999). A significant drawback of this method is that D has been shown to become concentration dependent in polymers at concentrations approaching saturation (Park et al， 1989).In accordance with

46、a previously proposed strategy for characterizing homogeneous, diffusion-controlled, indoor sources and sinks (Little and Hodgson, 1996)， the objectives of this study were to (1) develop a simple and rapid experimental method for directly measuring the key equilibrium and kinetic parameters, (2) exa

47、mine the validity of several primary assumptions upon which the previously mentioned physically-based models are founded and (3) develop correlations between the O and K，and readily available properties ofVOCs.例2:1. IntroductionLiquid desiccant cooling systems have been proposed as alternatives to t

48、he conventional vapor compression cooling systems to control air humidity, especially in hot and humid areas. Research has shown that a liquid desiccant cooling system can reduce the overall energy consumption, as well as shift the energy use away from electricity and toward renewable and cheaper fu

49、els (Oberg and Goswami，1998a). Burns et al. (1985) found that utilizing desiccant cooling in a supermarket reduced the energy cost of air conditioning by 60% as compared to conventional cooling Obtrg and Goswami (1998a) modeled a hybrid solar cooling system obtaining an electrical energy savings of

50、80%， and Chengchao and Ketao (1997) showed by computer simulation that solar liquid desiccant air conditioning has advantages over vapor compression air conditioning system in its suitability for hot and humid areas and high air flow rates.Use of liquid desiccants offers several design and performan

51、ce advantages over solid desiccants, especially when solar energy is used for regeneration (Oberg and Goswami, 1998c). Several liquid desiccants are commercially available: triethylene glycol, diethylene glycol, ethylene glycol, and brines such as calcium chloride, lithium chloride, lithium bromide,

52、 and calcium bromide which are used singly or in combination The usefulness of a particular liquid desiccant depends upon the applicatio n At the University of Florida, Oberg and Goswami (1998a,b) conducted a study of a hybrid solar liquid desiccant cooling system using triethylene glycol (TEG) as t

53、he desiccant. Their experimental work concluded that glycol works well as a desiccant. However, pure triethylene glycol does have a small vapor pressure which causes some of the glycol to evaporate into the air. Although triethylene glycol in nontoxic, any evaporation into the supply air stream make

54、s it unacceptable for use in air conditioning of an occupied building Therefore, there is a need to evaluate other liquid desiccants for hybrid solar desiccant cooling systems. Lithium chloride (LiCl) is a good candidate material since it has good desiccant characteristics and does not vaporize in a

55、ir at ambient conditions. A disadvantage with LiCl is that it is corrosive. This paper presents an experimental and theoretical study of aqueous lithium chloride as a desiccant for a solar hybrid cooling system, using a packed bed dehumidifier and regenerator.A number of experimental studies have be

56、en carried out on packed bed dehumidifiers using salt solutions as desiccants. Chung et al. (1992，1993)，and Chen et al. (1989) used lithium chloride (LiCl); Ullah et al. (1998)，Kinsara et al. (1998) and Lazzarin et al. (1999) used calcium chloride (CaC12); while Ahmed et al. (1997) and Patnaik et al

57、. (1990) used lithium bromide (LiBr). Other experiments for absorbers using LiCl were carried out by Kessling et al. (1998)，Kim et al. (1997) and Scalabrin and Scaltriti (1990).The moisture that transfers from the air to the liquid desiccant in the dehumidifier causes a dilution of the desiccant res

58、ulting in a reduction in its ability to absorb more water. Therefore, the desiccant must bee regenerated to its original concentratio n The regeneration process requires heat which can be obtained from a low temperature source, for which solar energy and waste energy from other processes are suitable Different ways to regenerate liquid desiccants have been pro