步进电机控制器电路及程序

1、步进电机控制器本毕设控制器采用stc89c52rc单片机，步进电机驱动采用uln2003，利用液晶1602显示设置参数和运行状态。通过设置实现对步进电机，转动度数、转动方向的控制。程序：#include #define uchar unsigned char#define uint unsigned intvoid init();void writec(uint com);void writed(uint dat);void delay(uint shu);void xieshuzu(uchar a,uchar add);void kaiji();void option_turn(uchar

2、n);void rightturn(uchar q);/uchar keyscan();sbit en_a=p10;sbit en_b=p11;sbit en_c=p12;sbit en_d=p13;sbit e=p34;sbit rs=p35;sfr duan=0x80; uchar code table = 0713024031 ;uchar code table2= bysj ;uchar code table3=pos: +360.00; uchar code table4=v: r/s;/*delay1ms*/void delay(uint shu)uint i,j; for(i=s

3、hu;i0;i-) for(j=110;j0;j-);/*反转*/void option_turn(uchar n)uchar i;for(i=0;in;i+)en_a=1;en_b=1;en_c=1;en_d=0;delay(150); /d相en_a=1;en_b=1;en_c=0;en_d=0;delay(150); /dc相 */en_a=1;en_b=1;en_c=0;en_d=1;delay(150); / c 相 */en_a=1;en_b=0;en_c=0;en_d=1;delay(150); /bc相 */en_a=1;en_b=0;en_c=1;en_d=1;delay(1

4、50);/b相en_a=0;en_b=0;en_c=1;en_d=1;delay(150); /ba相*/en_a=0;en_b=1;en_c=1;en_d=1;delay(150); /a相en_a=0;en_b=1;en_c=1;en_d=0;delay(150); /da相*/ /*正转*/void rightturn(uchar q)uchar j;for(j=0;jq;j+)en_a=0;en_b=1;en_c=1;en_d=1;delay(150); /a相en_a=0;en_b=0;en_c=1;en_d=1;delay(150); /ab相 */en_a=1;en_b=0;en

5、_c=1;en_d=1;delay(150); / 、b 相 */en_a=1;en_b=0;en_c=0;en_d=1;delay(150); /bc相 */en_a=1;en_b=1;en_c=0;en_d=1;delay(150);/c相en_a=1;en_b=1;en_c=0;en_d=0;delay(150); /cd相*/en_a=1;en_b=1;en_c=1;en_d=0;delay(150); /d相en_a=0;en_b=1;en_c=1;en_d=0;delay(150); /da相*/*/void kaiji()xieshuzu(table,0x80);xieshuzu

6、(table2,0xc0); /*/void xieshuzu(uchar a,uchar add)uchar cis; writec(add); for(cis=0;acis!=0;cis+) writed(acis); delay(2); /*/void xies(uchar a,uchar add) writec(add); writed(0x30+a); /*/void writec(uint com) e=0; rs=0; duan=com; delay(2); e=1; delay(2); e=0;/*/void writed(uint dat) e=0; rs=1; duan=d

7、at; delay(2); e=1; delay(2); e=0; /*/void init() writec(0x01); writec(0x38); writec(0x0c);/*/void keyscan(void)/*uchar keyscan() uchar k,skey; key=0xfe; skey=key; if(skey!=0xfe) delay(10); skey=key; if(skey!=0xfe) switch(skey) case(0xee):k=7;kc+;break; case(0xde):k=8;kc+;break; case(0xbe):k=9;kc+;br

8、eak; case(0x7e):k=0x0a;kc+;break; default:break;待添加的隐藏文字内容3 while(skey!=0xfe) skey=key; return k; key=0xfd; skey=key; if(skey!=0xfd) delay(10); skey=key; if(skey!=0xfd) switch(skey)case(0xed):k=4;kc+;break; case(0xdd):k=5;kc+;break; case(0xbd):k=6;kc+;break; case(0x7d):k=0x0b;kc+;break; default:brea

9、k;while(skey!=0xfd)skey=key;return k; key=0xfb; skey=key; if(skey!=0xfb) delay(10); skey=key; if(skey!=0xfb) switch(skey)case(0xeb):k=1;kc+;break; case(0xdb):k=2;kc+;break; case(0xbb):k=3;kc+;break; case(0x7b):k=0x0c;kc+;break; default:break;while(skey!=0xfb)skey=key;return k; key=0xf7; skey=key; if(skey!=0xf7) delay(10); skey=key; if(skey!=0xf7) switch(skey) case(0xe7):k=0x0d;kc+;break; case(0xd7):k=0; kc+;break; case(0xb7):k=0x0e;kc+;break; case(0x77):k=0x0f;kc+;break; default:break; while(skey!=0xf7) skey=key; return k; */*/*/void main(void)init