【BS英国标准word原稿】BS EN 12503-2-2001 Sports mats. Pole vault and high jump mats, safety requirements.doc

，如果你需要更多标准可以到/kmust1进行免费查阅。 如果你购买的文档存在缺页、字迹模糊、乱码等情况，请大家通过论坛消息与我联系。licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsibritish standard bs en12503-2:2001sports mats part 2: pole vault and high jump mats, safety requirementsthe european standard en 12503-2:2001 has the status of abritish standardics 97.220.30no copying without bsi permission except as permitted by copyright lawbs en 12503-2:2001national forewordthis british standard is the official english language version ofen 12503-2:2001. together with bs en 12503-1:2001, bs en 12503-3:2001, bs en 12503-4:2001, bs en 12503-5:2001, bs en 12503-6:2001 andbs en 12503-7:2001, it supersedes bs 1892-2.10:1990 which will bewithdrawn on 15 august 2001.the uk participation in its preparation was entrusted to technical committeesw/14, gymnasium and sports equipment, which has the responsibility to:aid enquirers to understand the text;licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsithis british standard, having been prepared under the direction of the consumer products and services sector committee, was published under the authority of the standards committee and comes into effect on15 june 2001 bsi 06-2001amd. no.datecommentsisbn 0 580 37269 3present to the responsible european committee any enquiries on the interpretation, or proposals for change, and keep the uk interests informed;monitor related international and european developments and promulgate them in the uk.a list of organizations represented on this committee can be obtained on request to its secretary.additional informationmat type 9these mats are designed for the teaching and coaching of high jumping, in schools and clubs, under the supervision of qualified teachers and coaches. they form stable rectangular landing areas without gaps. if the landing areas are constructed from individual modules then positive linkage is used. the use of a spike proof wear sheet or non spike proof cover will provide further assurance that an athletes foot is not able to penetrate between two adjacent sections. a landing area of sufficient size and depth allows for safe use by all participants, irrespective of jumping style. guidance on mats and their use may be obtained from the relevant local authority or the british association of advisers and lecturers in physical education (baalpe), .flame retardancyfor sports matting used in the uk certain minimum levels of flame retardancy and the required test methodology will be detailed in bs 1892-3, which is in preparation.cross-referencesthe british standards which implement international or european publications referred to in this document may be found in the bsi standards catalogue under the section entitled “international standards correspondence index”, or by using the “find” facility of the bsi standards electronic catalogue.a british standard does not purport to include all the necessary provisions of a contract. users of british standards are responsible for their correct application.compliance with a british standard does not of itself confer immunity from legal obligations.summary of pagesthis document comprises a front cover, an inside front cover, the en title page, pages 2 to 5 and a back cover.the bsi copyright date displayed in this document indicates when the document was last issued.amendments issued since publicationeuropean standard norme europenneeuropische normen 12503-2april 2001ics 97.220.30english versionsports mats - part 2: pole vault and high jump mats, safety requirementstapis de sport - partie 2: sautoirs pour saut la perche et saut en hauteur, exigences de scuritsportmatten - teil 2: stabhochsprung- und hochsprung- matten, sicherheitstechnische anforderungenthis european standard was approved by cen on 21 january 2001.cen members are bound to comply with the cen/cenelec internal regulations which stipulate the conditions for giving this european standard the status of a national standard without any alteration. up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the management centre or to any cen member.this european standard exists in three official versions (english, french, german). a version in any other language made by translation under the responsibility of a cen member into its own language and notified to the management centre has the same status as the official versions.cen members are the national standards bodies of austria, belgium, czech republic, denmark, finland, france, germany, greece, iceland, ireland, italy, luxembourg, netherlands, norway, portugal, spain, sweden, switzerland and united kingdom.european committee for standardization c o m i t eur o p en de nor m a l i s a ti on eur o p i s c h es kom i tee f r nor m ung management centre: rue de stassart, 36 b-1050 brusselslicensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsi 2001 cenall rights of exploitation in any form and by any means reserved worldwide for cen national members.ref. no. en 12503-2:2001 epage 3en 12503-2:2001contentspagelicensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsiforeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 safety requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4annex a (informative) flame retardancy . . . . . . . . . . . . . . . . . . . . . . . . . 5forewordthis european standard has been prepared by technical committee cen/tc 136 sports, playground and other recreational equipment, the secretariat of which is held by din.this european standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by october 2001, and conflicting national standards shall be withdrawn at the latest by october 2001.this standard en 12503 sports mats consists of: part 1:gymnastic mats, safety requirementspart 2:pole vault and high jump mats, safety requirementspart 3:judo mats, safety requirementspart 4:determination of shock absorptionpart 5:determination of the base frictionpart 6:determination of the top frictionpart 7:determination of static stiffnessannex a is informative.according to the cen/cenelec internal regulations, the national standards organizations ofthe following countries are bound to implement this european standard: austria, belgium, czech republic, denmark, finland, france, germany, greece, iceland, ireland, italy, luxembourg, netherlands, norway, portugal, spain, sweden, switzerland and the united kingdom.licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsi1 scopethis standard specifies safety requirements (including performance requirements) for 3 types of high jump and pole vault mats used in school, training and competition (see clause 4).the performance and safety values cover shock absorption and anti-slip characteristics of the base.note for the specific requirements of international official competitions, see appropriate international regulations.2 normative referencesthis european standard incorporates by dated or undated reference, provisions from other publications. these normative references are cited at the appropriate places in the text and the publications are listed hereafter. for dated references, subsequent amendments to or revisions of any of these publications apply to this european standard only when incorporated in it by amendment or revision. for undated references the latest edition of the publication referred to applies (including amendments).en 12503-1:2001sports mats part 1: gymnastic mats, safety requirementsen 12503-3:2001sports mats part 3: judo mats, safety requirementsen 12503-4:2001sports mats part 4: determination of shock absorptionen 12503-5:2001sports mats part 5: determination of the base friction3 terms and definitionsfor the purposes of this standard the following terms and definitions apply:3.1shock absorptionability of the mat to reduce impact forces on the athlete, expressed as a maximum deceleration under defined test conditions en 12503-1:20013.2percentage deflectionability of the mat to deform to an impact expressed as a percentage of the mat thickness3.3resilienceability of the mat to return energy after the impact, expressed as resilience in percent under defined test conditionsen 12503-1:20013.4baseunder side of the mat designed to be in contact with the floor during use en 12503-1:20014 classificationpole vault and high jump mats shall be classified by the design (types) as shown in table 1.licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsitable 1 - typestypetypical use9high jump (schools, training)10high jump (competition)11pole vaultnote for types 1 to 8 see en 12503-1:2001 and for type 12 seeen 12503-3:2001.5 safety requirements5.1 shock absorptionwhen tested according with en 12503-4:2001, the mats shall comply with the values of table 2.table 2 - shock absorptiontypepeak decelerationg(1 g = 9,81 ms 2)percentagedeflection%resilience%9 10 70 2010 10 60 2011 10 55 205.2 base friction characteristicswhen tested in accordance with en 12503-5:2001 the mat shall have a value of friction according to table 3, unless the mat is prevented from moving by a mechanical means.table 3 - base friction characteristicstypefrictional value9 4,510test not needed11test not needed6 markingmats shall be marked legibly and indelibly with the following information:a) the number of this european standard en 12503-2 and the type number;b) the name or trademark of the manufacturer, retailer or importer and year of manufacturing;c) which is the top surface of the mat (if not clearly recognizable).page 5en 12503-2:2001licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsiannex a (informative)flame retardancysports matting for use in the united kingdom shall satisfy certain minimum levels of flame retardancy. these levels and the required test methodology are detailed in bs 1892:2.10 : 1999 (revised).licensed copy: sheffieldun sheffieldun, na, sat oct 28 14:33:50 gmt+00:00 2006, uncontrolled copy, (c) bsibs en12503-2:2001bsi389 chiswick high roadlondonw4 4albsi british standards institutionbsi is the independent national body responsible for preparingbritish standards. it presents the uk view on standards in europe and at the international level. it is incorporated by royal charter.revisionsbritish standards are updated by amendment or revision. users ofbritish standards should make sure that they possess the latest amendments or editions.it is the constant aim of bsi to improve the quality of our products and services. we would be grateful if anyone finding an inaccuracy or ambiguity while using this british standard would inform the secretary of the technical committee responsible, the identity of which can be found on the inside front cover.tel: 020 8996 9000. fax: 020 8996 7400.bsi offers members an individual updating service called plus which ensures that subscribers automatically receive the latest editions of standards.buying standardsorders for all bsi, international and foreign standards publications should be addressed to customer services. tel: 020 8996 9001. fax: 020 8996 7001. standards are also available from the bsi website at .in response to orders for international standards, it is bsi policy to supply the bsi implementation of those that have been published as british standards, unless otherwise requested.information on standardsbsi provides a wide range of information on national, european and international standards through its library and its technical help to exporters service. various bsi electronic information services are also available which gi