[计算机]银行项目-Peoplesoft_HRMS安装文档_V.doc

安装文档编制单位：有限公司人力资源项目技术实施组起草：靖越编制日期：2009年6月HR项目技术实施组PEOPLESOFT安装文件编号：20090610目录第一部分数据库安装21数据安装：22执行脚本过程5第二部分HRMS安装51安装WEBLOGIC52安装Tuxedo113安装PeopleTools154安装HRMS245安装HRMS-ML296运行CONFIGURATION MANAGER347启动Data Mover368升级peopletools版本409配置 Appserver4110配置process server6611安装Change Assistance8012安装补丁包81第三部分HRMS设置921REPORTNODE的配置说明922菜单搜索功能93第四部分安装PEOPLEBOOK95第一部分 数据库安装1 数据安装：将数据库的密码设置为manager（以后是可以修改的这里将数据库密码设为manager是为了以后执行创建user和tablespace时不需要修改脚本）。2. 调整数据库字符集3：修改参数nls_length_semantics: 将BYTE设置为CHAR。2 执行脚本过程1. 以sysdba用户登陆数据库执行脚本utlspace.sql 请注意修改数据文件位置。附件中的脚本将数据库文件放在了“D:OracledataHRDEMOPSDATA“下 请根据你们的需要修改这些文件位置。/home/oracle/sql2. 以sysdba用户登陆数据库执行脚本dbowner.sql3. 以sysdba用户登陆数据库执行脚本hcddl.sql 同样注意修改数据库文件位置。4. 以system user登陆数据库执行脚本psroles.sql 文件5. 以system user登陆数据库执行脚本psadmin.sql 文件。执行过程中将提示输入Enter name of PeopleSoft Owner ID: 填写“SYSADM”执行过程中将提示输入Enter PeopleSoft Owner ID password: 填写“SYSADM”执行过程中将提示输入Enter desired default tablespace: 填写“PSDEFAULT”6. 以system user登陆数据库执行脚本connect.sql第二部分 HRMS安装1 安装WEBLOGIC双击执行server920-win32.exe文件开始安装。选择Next选择Yes选项，点击Next。在数据框中数据BEA Home的路径，然后点击Next。选择Complet，点击Next。选择Mercury profiling tools.点击Next。选择Yes，点击Next。点击Next。点击Next。等待直到安装完毕。选择Done完成安装。（在这里不需要 Run Quickstart）2 安装Tuxedo双击图中所示的安装文件启动Tuxedo的安装程序。输入 “Y” 然后回车。输入 “Y” 然后回车。输入 “Y” 然后回车。输入 “Y” 然后回车。等待直到安装完成提示重新启动计算机。重新启动计算机。3 安装PeopleTools选择B42585-01中的setup程序启动PeopleTools安装程序。选择“我接受许可证协议的条款”，点击下一步。输入授权号。点击下一步。选择“Unicode Database”， 点击下一步。根据需要选择所需安装的Server，这里默认安装为全部安装，选择下一步。输入安装路径。根据需要选择是否安装“ Enterprise Resources Plannning Connectors”，这里选择安装该功能，输入安装路径，点击下一步。输入Oracle 连接程序的所在位置，点击下一步。选择是否安装PeopleTools图标，这里选择安装，点击下一步。输入PeopleTools 图标的文件夹名称，点击下一步。输入Enviroment Hub machine 的机器名或者IP地址，以及端口号，点击下一步。等待直到提示插入第二张盘。输入第二个安装文件的路径，点击确定。输入第三个安装文件的路径，点击确定。输入第四个安装文件的路径，点击确定。输入第六个安装文件的路径，点击确定。输入第七个安装文件的路径，点击确定。点击完成，完成PeopleTools的安装。4 安装HRMS执行HRMS的安装程序，点击下一步。选择“接受认证条款”，点击下一步。输入许可证码，点击下一步。选择安装“Unicode Database”，点击Next。选择“Next”。输入HRMS的安装路径。选择将要安装的产品，点击下一步。点击下一步开始安装。安装开始，等待直到安装完成。点击finish完成本次安装。5 安装HRMS-ML点击“Next”开始安装。选择接受认证条款。输入许可证号。选择 “Unicode Database”，点击Next。点击Next。输入将要安装的位置，点击Next。选择想要安装的产品，点击Next。点击Next开始安装。点击“Finish”完成安装。6 运行CONFIGURATION MANAGER配置数据库连接。Database: 数据库名字。User： 用户名。Connect：连接用户的名称。Connect：连接用户的密码。Connect Password：再次输入连接用户的密码。7 启动Data Mover输入用户名、密码。选择 Database setup。选择数据库类型和数据库的字符集。选择将要添加的数据。数据peoplesoft数据库参数。选择基础语言。运行自动生成的脚本。8 升级peopletools版本运行rel8.49un.sql。9 配置 Appserver在PS_HOME/appserv/ 目录下 执行psadmin.exe文件。选择 1）选择 2）输入数据库名字选择模板类型。具体配置为：Startup;=; Database Signon settings;=DBName=peopleDBType=ORACLEUserId=PSUserPswd=sxaYMM0Crai26F3R14m0+JWdoXJsSHVovUxlKDaxFDM=ConnectId=peopleConnectPswd=kyD3QPxnrag=ServerName=Database Options;=; Database-specific configuration options;=SybasePacketSize=UseLocalOracleDB=0;ORACLE_SID=EnableDBMonitoring=1OracleDisableFirstRowsHint=0Security;=; Security settings;=Validate Signon with Database=0Workstation Listener;=; Settings for Workstation Listener;=Address=127.0.0.1Port=7000Encryption=0Min Handlers=1Max Handlers=2Max Clients per Handler=40Client Cleanup Timeout=60Init Timeout=5Tuxedo Compression Threshold=5000JOLT Listener;=; Settings for JOLT Listener;=Address=/127.0.0.1Port=9000Encryption=0Min Handlers=1Max Handlers=2Max Clients per Handler=40Client Cleanup Timeout=10Init Timeout=5 Client Connection Mode=ANYJolt Compression Threshold=1000000JOLT Relay Adapter;=; Settings for JOLT Relay Adapter (JRAD);=Listener Address=127.0.0.1Listener Port=9100Domain Settings;=; General settings for this Application Server.;=;-Domain ID=TESTSERV;-Add to PATH=D:oracleproduct10.2.0db_1BIN;-Spawn Threshold=1,600:1,1;-Restartable=Y;-;Log Directory=%PS_SERVDIR%LOGS;-; This allows for dynamic changes to certain setting without having to reboot; the domain. The settings that can be dynamically changed are: Recycle Count,; Consecutive Service failures, Trace SQL, Trace Mask SQL, TracePC, TracePCMask,; TracePpr, TracePprMask, TracePIA, TracePIAMask, Log Fence, Enable DB Monitoring,; Enable Debugging, LogErrorReport, MailErrorReport, DumpMemoryImageAtCrash; These settings are further identified by the Dynamic change allowed for .; comment.Allow Dynamic Changes=Y;-; Logging detail level; Level Type of information; - -; -100 - Suppress logging; -1 - Protocol, memory errors; 0 - Status information; 1 - General errors; 2 - Warnings; 3 - Tracing Level 1 (default); 4 - Tracing Level 2; 5 - Tracing Level 3; Dynamic change allowed for LogFenceLogFence=3;-; Trace-Log File Character Set: Character set used for log and trace files;Trace-Log File Character Set=ANSIPeopleCode Debugger;=; PeopleCode Debug Server settings;=;-PSDBGSRV Listener Port=9500;-; PeopleCode Debugger Trace Settings; Level Type of tracing; - -; 0 Off (default); 1 Level 1 - log connection activity; 2 Level 2 - log debug broker transactions (getsession, register/unregister, acquire/unacquire); 3 Level 3 - log primary debuggee/debugger transactions (register, modechange, seteventflag, break); 4 Level 4 - log debuggee/debugger variables transactions ; 5 Level 5 - log debuggee/debugger command responses and gotbreaks; Warning: Levels 3 thru 5 result in lots of transaction data being logger and require plenty of disk space.DebuggerMsgLogEnable=0Trace;=; Server Trace settings;=;-; SQL Tracing Bitfield; Bit Type of tracing; - -; 1 - SQL statements; 2 - SQL statement variables; 4 - SQL connect, disconnect, commit and rollback; 8 - Row Fetch (indicates that it occurred, not data); 16 - All other API calls except ssb; 32 - Set Select Buffers (identifies the attributes of columns; to be selected).; 64 - Database API specific calls; 128 - COBOL statement timings; 256 - Sybase Bind information; 512 - Sybase Fetch information; 1024 - SQL Informational Trace; 4096 - Manager information; 8192 - Mapcore information; Dynamic change allowed for TraceSql and TraceSqlMaskTraceSql=0TraceSqlMask=12319;-; PeopleCode Tracing Bitfield; Bit Type of tracing; - -; 1 - Trace Evaluator instructions (not recommended); 2 - List Evaluator program (not recommended); 4 - Show assignments to variables; 8 - Show fetched values; 16 - Show stack; 64 - Trace start of programs; 128 - Trace external function calls; 256 - Trace internal function calls; 512 - Show parameter values; 1024 - Show function return value; 2048 - Trace each statement in program (recommended); Dynamic change allowed for TracePC and TracePCMaskTracePC=0TracePCMask=4095;-; Panel Processor Tracing Bitfield; Bit Type of tracing; - -; 1 - Log extra debug messages; 2 - Dump panel after build; 4 - Dump buffers after PPRInit; 8 - Dump buffers before/after service; 16 - Dump buffers after scrollselect; 32 - Dump buffers after modal panel; 64 - Dump buffers before save; 128 - Dump buffers after insertrow; 256 - Trace default processing; 512 - Dump PRM data; 1024 - dump counters (debug build only); 2048 - dump memory statistics; 4096 - Trace related display processing; 8192 - Trace keylist generation; 16384 - Trace work record settings; Dynamic change allowed for TracePPR and TracePPRMaskTracePPR=0TracePPRMask=32767;-; PIA Page Generation Tracing Bitfield; Bit Type of tracing; - -; 1 - Log page generation errors; 2 - Show table layout via cell borders in generated page; 4 - Annotate field overlap in HTML source; 8 - Detailed trace of table generation algorithm; 16 - Inline stylesheet in generated pages; 32 - Inline javascript in generated pages; 64 - QATesting - annotation and extra tags needed by Robot; 128 - Format source. Make HTML more readable; 256 - Save File. Save each generated page in log directory; 512 - Debug JavaScript. Include debug functions in page; 1024 - Log form data. Log all request parameters on each service; 2048 - Log key errors. Write log message for unrecognized query parameters.; Dynamic change allowed for TracePIA and TracePIAMask; TracePIA=0TracePIAMask=32767;-; AE Tracing Bitfield; Bit Type of tracing; - -; 1 - Trace STEP execution sequence to AET file; 2 - Trace Application SQL statements to AET file; 4 - Trace Dedicated Temp Table Allocation to AET file; 8 - not yet allocated; 16 - not yet allocated; 32 - not yet allocated; 64 - not yet allocated; 128 - Timings Report to AET file; 256 - Method/BuiltIn detail instead of summary in AET Timings Report; 512 - not yet allocated; 1024 - Timings Report to tables, ignored if Process Instance is 0; 2048 - DB optimizer trace to file; 4096 - DB optimizer trace to tables; 8192 - Transform traceTraceAE=0;-; Analytic Server Tracing Bitfield; MostSignificantBit - LeastSignificantBit; QAS |ACE MODEL | ACE CALC | ACE API| Plugin | DCache | Utils | Analytic Server | ; 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1; Bit Type of tracing 3 bits per component (octal word); - - -; 1 - Analytic Server LSB; 2 - Analytic Server MSB LSB LogFence; 4 - Analytic Server MSB - - -; 8 - Utilities LSB 0 0 0 0 (Severity_Status); 16 - Utilities 0 0 1 1 (Severity_Error); 32 - Utilities MSB 0 1 0 2 (Severity_Warn); 64 - DataCache LSB 0 1 1 3 (Severity_Info); 128 - DataCache 1 0 0 4 (Severity_Trace1); 256 - DataCache MSB 1 0 1 5 (Severity_Trace2); 512 - Plug-in LSB 1 1 0 6 (not used); 1024 - Plug-in 1 1 1 7 (not used); 2048 - Plug-in MSB; 4096 - ACE API LSB; 8192 - ACE API; 16384 - ACE API MSB; 32768 - ACE CALC LSB; 65536 - ACE CALC; 131072 - ACE CALC MSB; 262144 - ACE MODEL LSB; 524288 - ACE MODEL; 1048576 - ACE MODEL MSB; 2097152 - QAS LSB; 4194304 - QAS ; 8388608 - QAS MSB; ; The bits enable logging for OptEngine components beyond the standard; LogFence setting. E.g., TraceAnalytic=14380470 sets full trace on all components.; Using 110 (1 greater than Severity_Trace2) for each component:; OptEng: 4 + 2; Utils : 32 + 16; DC : 256 + 128; Plugin: 2048 + 1024; ACE API: 16384 + 8192; ACE CALC: 131072 + 65536; ACE MODEL: 1048576 + 524288; QAS : 8388608 + 4194304; Total : 14380470TraceAnalytic=14380470TraceAnalyticMask=16777215;-; Performance Monitor Tracing Bitfield; Bit Type of tracing; - -; 1 - Trace All performance monitor agent activityTracePPM=0;-; Create a memory image of the failing process during a crash; Setting Meaning; - -; NONE no memory image; MINI mini memory image; FULL full memory image; If set to MINI or FULL, when a crash occurs, a memory.dmp file is; generated under /.; Dynamic change allowed.DumpMemoryImageAtCrash=NONE;-;If set to Y, when a crash occurs, the application server process will write ;additional information to help in debugging the crash that occurred.;This consists of the customized object definitions for reproducing ;the request on another database. DumpManagerObjectsAtCrash=Y;-; If set to Y, when a runtime error is detected, the message and a dump of; the application state will be written to the current log file.; Dynamic change allowed.LogErrorReport=N;-; When set to an email address, an email will be sent when an error report; or a crash dump is written to the log.; Dynamic change allowed.MailErrorReport=Cache Settings;=; Settings for managed object caching; Default EnableServerCaching=2, ServerCacheMode=0; Default CacheBaseDir=%PS_SERVDIR% if defined else %PS_HOME/cache ; You can change these values by uncommenting and setting to the desired value;=;-; EnableServerCaching -; 0 Server file caching disabled; 1 Server file caching limited to most used classes; 2 Server file caching for all types;EnableServerCaching=2;-; CacheBaseDir = the base file cache directory;CacheBaseDir=%PS_SERVDIR%;-; ServerCacheMode; 0 One file cache directory per app server process; 1 One file cache directory per domain (shared file cache, needs to be preloaded);ServerCacheMode=0;-; Deprecated cache settings : MaxInMemoryObjects;-;-; MaxCacheMemory - controls cache memory pruning; 0 cache memory pruning disabled; 0 max size of memory cache in MBytesMaxCacheMemory=0;-; Preload Cache projects for file and