标准解读
《GB/T 13511.4-2025 配装眼镜 第4部分：多焦和渐变焦老视成镜》是针对多焦点和渐变焦老视眼镜制定的一项国家标准。该标准旨在规范这类眼镜的设计、生产、检测以及销售过程中的技术要求，确保产品能够满足使用者对于视觉矫正的需求，并保证其安全性和舒适度。
标准中首先定义了相关术语，比如“多焦点眼镜”是指在同一镜片上具有两个或多个不同屈光度区域的眼镜；而“渐变焦眼镜”则是在单个镜片内平滑过渡从远视区到近视区（或反之）的屈光度变化。接着，标准详细描述了这些类型眼镜的技术参数，包括但不限于光学中心距离、附加顶焦度、棱镜效应等关键指标的具体数值范围及其测试方法。
此外，《GB/T 13511.4-2025》还规定了关于镜架选择与调整的要求，强调应根据佩戴者的面部特征和个人偏好来挑选合适的款式，并通过专业人员进行精确调整以达到最佳适配效果。同时，也对标签标识做出了明确指示，要求每副合格出厂的眼镜都必须附带清晰的信息说明，如制造商名称、地址、联系方式、产品型号规格等必要内容。
在质量控制方面，本标准提出了严格的检验规则，涵盖了外观检查、尺寸测量、性能测试等多个环节，确保每一件产品都能达到既定的质量标准。最后，还特别指出需要建立完善的售后服务体系，为消费者提供包括维修、保养在内的全方位支持服务。
如需获取更多详尽信息，请直接参考下方经官方授权发布的权威标准文档。
....
查看全部
- 即将实施
- 暂未开始实施
- 2025-02-28 颁布
- 2026-03-01 实施
文档简介
ICS11.040.70
CCSY89
中华人民共和国国家标准
GB/T13511.4—2025
配装眼镜
第4部分：多焦和渐变焦老视成镜
Assembledspectacles—Part4：Multifocalandpower⁃variationnear⁃vision
spectacles
2025⁃02⁃28发布2026⁃03⁃01实施
国家市场监督管理总局
国家标准化管理委员会发布
GB/T13511.4—2025
目次
前言··························································································································Ⅲ
引言··························································································································Ⅳ
1范围·······················································································································1
2规范性引用文件········································································································1
3术语和定义··············································································································1
4要求·······················································································································2
4.1一般要求···········································································································2
4.2顶焦度范围········································································································2
4.3多焦老视成镜·····································································································2
4.4渐变焦老视成镜··································································································3
4.5装配质量···········································································································3
5试验方法·················································································································3
5.1试验条件···········································································································3
5.2一般要求···········································································································3
5.3多焦老视成镜·····································································································3
5.4渐变焦老视成镜··································································································4
5.5装配质量···········································································································4
6标记·······················································································································5
6.1镜架标记···········································································································5
6.2渐变焦老视成镜标记····························································································5
7标志和包装··············································································································5
7.1通用标志···········································································································5
7.2多焦老视成镜·····································································································6
7.3渐变焦老视成镜··································································································6
7.4包装·················································································································6
Ⅰ
GB/T13511.4—2025
前言
本文件按照GB/T1.1—2020《标准化工作导则第1部分：标准化文件的结构和起草规则》的规定
起草。
本文件是GB/T13511《配装眼镜》的第4部分。GB/T13511已经发布了以下部分：
——第1部分：单焦和多焦定配眼镜；
——第2部分：渐变焦定配眼镜；
——第3部分：单光老视成镜；
——第4部分：多焦和渐变焦老视成镜。
请注意本文件中的某些内容可能涉及专利。本文件的发布机构不承担识别专利的责任。
本文件由中国轻工业联合会提出。
本文件由全国眼视光标准化技术委员会（SAC/TC596）归口。
本文件起草单位：鹰潭万成光学科技有限公司、豪雅（上海）光学有限公司、广东星创视光光学科技
有限公司、临海市万大眼镜有限公司、台州市俊博眼镜有限公司、河北超视立科技股份有限公司、东华
大学、国家眼镜玻璃搪瓷制品质量检验检测中心。
本文件主要起草人：王立坤、赵牧夫、马骥、王贺兰、张朋、何江、王俊皓、边洪峰、叶佳意、唐小军、
徐张倩、吴嘉许、孙环宝、陈少雄、张欣、周蓓莹、孙静杰、王连军。
Ⅲ
GB/T13511.4—2025
引言
配装眼镜包括定配眼镜和老视成镜，适用于各种屈光不正或老视人群的视力矫正。通过配戴适合
个人需求的配装眼镜，可以满足人们在不同场合的使用需求。GB/T13511《配装眼镜》旨在规范配装
眼镜的生产和使用，提高配装眼镜的质量和安全性，保障消费者的视力健康。
GB/T13511作为与强制性国家标准配套的推荐性国家标准，由四部分构成。
——第1部分：单焦和多焦定配眼镜。目的在于保障单焦和多焦定配眼镜的质量和安全性，提升
加工水平。
——第2部分：渐变焦定配眼镜。目的在于保障渐变焦定配眼镜的质量和安全性，提升加工水平。
——第3部分：单光老视成镜。目的在于提高单光老视成镜的产品质量，保障老年人的视觉健康
和使用安全。
——第4部分：多焦和渐变焦老视成镜。目的在于提高多焦和渐变焦老视成镜的产品质量，保障
老年人的视觉健康和使用安全。
Ⅳ
GB/T13511.4—2025
配装眼镜
第4部分：多焦和渐变焦老视成镜
1范围
本文件规定了多焦老视成镜和渐变焦老视成镜的要求、标记、标志和包装，描述了相应的试验
方法。
本文件适用于批量生产的多焦老视成镜和渐变焦老视成镜。
2规范性引用文件
下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文
件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于
本文件。
GB/T10810.1眼镜镜片第1部分：单焦和多焦
GB/T10810.2眼镜镜片第2部分：渐变焦
GB/T13511.1配装眼镜第1部分：单焦和多焦定配眼镜
GB/T13511.2配装眼镜第2部分：渐变焦定配眼镜
GB/T13511.3配装眼镜第3部分：单光老视成镜
GB/T14214眼镜架通用要求和试验方法
GB/T26397眼科光学
温馨提示
- 1. 本站所提供的标准文本仅供个人学习、研究之用，未经授权，严禁复制、发行、汇编、翻译或网络传播等，侵权必究。
- 2. 本站所提供的标准均为PDF格式电子版文本（可阅读打印），因数字商品的特殊性，一经售出，不提供退换货服务。
- 3. 标准文档要求电子版与印刷版保持一致，所以下载的文档中可能包含空白页，非文档质量问题。
最新文档
- 预防保健门诊业务介绍
- 院内感染概念及上报流程
- 直播策划与运营实务（第二版）教案 项目四任务一、主播行为规范
- 2019年辽宁省朝阳市中考历史试卷（空白卷）
- 四年级数学(上)计算题专项练习及答案汇编
- 学前教育学 课件 项目5 幼儿园环境
- 业务开展情况分析表
- 运维保障服务方案
- 角钢生产工艺流程
- 生物必修二第三章知识点
- DB31∕T 795-2014 综合建筑合理用能指南
- GB/T 44979-2024智慧城市基础设施紧凑型城市智慧交通
- 2025年保密知识试题库附参考答案（精练）
- 临床微生物学检验技术知到智慧树章节测试课后答案2024年秋济宁医学院
- 分级护理质量考核标准
- 食品厂卫生安全员工培训
- 幼儿园校园欺凌自查报告2022
- 肝脾常见变异
- 水土保持方案投标文件技术部分
- 《人力资源管理》大学期末测试题库500题（含答案）
- 《农村中小学音乐教学现状与对策研究》课题开题报告
评论
0/150
提交评论