- 废止
- 已被废除、停止使用,并不再更新
- 2002-12-06 颁布
©正版授权
注:本标准为国际组织发行的正版标准,下载后为完整内容;本图片为程序生成,仅供参考,介绍内容如有偏差,以实际下载内容为准
![【正版授权】 ISO 13784-2:2002 EN Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms_第1页](http://file4.renrendoc.com/view5/M01/34/2D/wKhkGGaH0AGAK748AADf57ZswiU182.jpg)
全文预览已结束
下载本文档
基本信息:
- 标准号:ISO 13784-2:2002 EN
- 标准名称:夹芯板建筑系统的抗火测试 第2部分:大型房间的测试方法
- 英文名称:Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
- 标准状态:废止
- 发布日期:2002-12-06
文档简介
大房间的测试方法。
测试内容如下:
1.**设备**:
*需要具有特定尺寸和规格的设备,用于测试房间内的烟雾和热量。
*需要一个能模拟大空间内部热环境的高温试验箱,以便对房间内的建筑材料进行全面测试。
*还需要一些其他设备,如测量设备、安全设备等。
2.**测试过程**:
*首先,将房间内的建筑材料安装好,并确保其正确安装,没有任何漏洞或间隙。
*然后,将高温试验箱连接到建筑材料上,并启动试验箱。
*在测试期间,需要记录并测量房间内的温度、烟雾浓度和材料变化等情况。
*如果发现任何异常情况或材料变化,应立即停止测试并采取适当的措施。
3.**结果评估**:
*根据测量数据评估建筑材料对火反应的表现,包括材料燃烧程度、烟雾产生程度、温度上升情况等。
*根据评估结果确定建筑材料是否符合安全标准。
4.**质量控制**:
*在测试过程中需要确保质量控制,包括测试设备的准确性和可靠性,建筑材料的质量等。
*需要定期检查测试设备的性能和准确性,以确保测试结果的准确性。
5.**注意事项**:
*在测试过程中需要注意安全问题,确保测试人员和周围人员的安全。
*需要遵守所有相关法规和标准,确保测试过程的合法性和合规性。
以上就是ISO13784-2:2002EN标准中关于夹层建筑系统对火反应的测试方法——大房间测试的内容。进行此项
温馨提示
最新文档
- 【正版授权】 ISO 21535:2007/Amd 1:2016 EN Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants - Amendment 1
- 【正版授权】 ISO 2141:1972 EN Lifting hooks - General characteristics
- 【正版授权】 ISO 21238:2007 EN Nuclear energy - Nuclear fuel technology - Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages g
- 【正版授权】 ISO 21179:2013 EN Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt
- 【正版授权】 ISO 21127:2023 EN Information and documentation - A reference ontology for the interchange of cultural heritage information
- 【正版授权】 ISO 21087:2019 EN Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles
- 【正版授权】 ISO 21078-2:2006 EN Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
- 【正版授权】 ISO 21003-2:2008/Amd 1:2011 EN Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1
- 【正版授权】 ISO 20987:2019 EN Simplified design for mechanical connections between precast concrete structural elements in buildings
- 【正版授权】 ISO 20874:2018 EN Footwear - Test methods for outsoles - Needle tear strength
- 出生证明日文翻译
- 汽车吊安全操作规程
- proe逆向重新造型特征
- 水力发电PPT课件
- 北京市医疗机构环境清洁卫生技术与管理规范.
- 职工履历表模板
- 公文写作常用词语
- 乐嘉性格色彩分析PPT课件
- 分布式光伏发电项目并网验收调试报告.doc
- 七年级生物学情分析材料
- 0204药房工作站住院用户培训课件
评论
0/150
提交评论