协议范本-质量协议加强版

1、 specifications are binding for deliveries. Modifications/changes to the specifications shall be distributed in theform of memoranda to the suppliers by the Supplier Quality Management of XXXX. The withdrawal of the replaced specifications shall also be carried out by the Supplier Quality Management

2、 Department.2.2 如有供应商发现订单错误（甚至可能只是怀疑订单错误），应当立即书面通知 XXXX。 / If the supplier notices errors in the order (or even if it may merely suspect these), XXXX is to be informed immediately inwriting. service is established as the source of the fault, the supplier shall, in addition to the replacing defective

3、 materials, reimburse the processing costs (including XXXXs own personnel costs) which have arisen up tothe stage of producing the finished product. If temporally possible XXXX gives the supplier the chance to improve and / or rework the faulty delivery for their costs in a timeframe accepted by XXX

4、X. XXXX has the right to audit the Supplier s plants concerned togetherwith its customers. One (1) week prior to ）， in a proper manner, the defective products on its business premises for a maximum ofthree months from thedate of complaint and, upon request, to surrender possession of these immediate

5、ly to the supplier for inspection. In the event of a justified complaint, the costs of this inspection are to be borne in full by the supplier. The supplierwill indemnify and hold harmless XXXX with regard to any ofthese inspection costs,transportation costs for the return of the products and (or) s

6、ervices from the supplier. XXXX is only obliged tobear the costs of the inspection if a complaint is unjustified and if the inspection costs are normal and reasonable, orwhich were caused by specific order of XXXX. time during the validity ofthis agreement orwithin a period of 2 years there after, d

7、iscontinue its services, the supplier must give a signed written notice of its intention to discontinue such service and ensure that XXXXreceives a copy of such notice at least twelve (12) months prior to the intended date of discontinuation, inorder to give XXXX a chance to place end-of-life Orders

8、 before discontinuation. The supplier will use its best endeavors to provide alternative solutions as soon as possible. part approval process (PPAP) according to the stated Level in the purchase order (usually standard is Level 3)has to be executed. The implementation of this process will be agreed

9、between Supplier, Quality v. last delivery date. The rules and terms for Product / Process Changes and Product Discontinuation are ）， HYPERLINK l _bookmark1 6.1.2 供应商应 5 个工作日完成纠正和预防措施的确认。复杂的问题需要在 5 个工作日明确的措施进度。 / Confirmation on corrective and preventive actions within 5 additional working days (inc

10、luding the finalized 8Dreport). Alternatively where complex issues are involved, clear progress report within 5 additional working days on actions with daily up-dates. 6.5 对已交付的货物收据，产品报价应该和 XXXX 约定的价格。运输时间应符合寄售合同中的约定条件。 / Upon receipt ofthe delivered goods, the risk for supplied products shall trans

11、fer to XXXX regardless oftheagreed quotation for the delivery. The time ofthe transfer of use shall comply with the agreed conditions of any consignment contract which may exist. 如有质量问题 重新评估或再审核 documents or information pertaining to XXXX, which the supplier receives, may be passed to third parties, ），）， ）， ）， ）， 不合格批次产品总价值 不合格批次产品总价值 5% n 装配工时损失 =拆卸工时 +重新装配工时工时费用 =工时 12 元/小时 不合格批次产品总价值进货检验不合格 售时/ 售后态度/ 沟通 ， 并按 20 元/日收