[电信]EWSDBCT(COMMON)安装步骤

1、.; BCT (COMMON) 安装步骤Windows NT workstation 4.0 安装,必须装NETWORK。详见Windows NT workstation 4.0 Service Pack 3 (CD-ROM)执行文件 i386update.exeWelcome屏幕-NextSoftware License Agreement-YesService Pack Setup-选Install the Service Pack-Next是否建Uninstall directory-选Yes, Iwant to creat-Next安装-Finish,开始拷贝文件提示Restart y

2、our Computer -OKX.25 Eicon drive software (CD-ROM)设置EICON卡开关,开关设为 1-OFF(OPEN),2-ON(CLOSE),3-ON,4-OFF设置EICON卡跳线，跳线靠近插头，上方有AB标志，从A位置换到B位置。 打开机箱插入插槽.Start-Settings-Control Panel-Network-Adapter-add,选择擧ave disk” , 输入CD所在盘符.屏幕出现 擡icon WAN Adapters” 按OK.屏幕Adapter Properties-选Detect,出现 Warning 框,点OK ,选sele

3、ct.屏幕Adapter Properties出现各项参数: IO port : 390, IRQ : 10, M :C800 点OK选择路径及组名-使用缺省值,点OK揇o you want to run the WAN Services configuration program?”-Yes修改各项参数, 参数值见表1.屏幕擶AN Services Install”(是否安装WAN Services for Windows NT optional services software)-NO 点Close 关闭Control Panel 的 Adapter屏,退出时应有Binding信息提示R

4、estartPCMX-32 (TNSUI user interface for CMX applications (OPENFT CD-ROM)OpenFT Master Setup 菜单,选择PCMX-32图标WELCOME屏幕-NEXTPCMX32 Information-NEXT选择擟ustom installation”-NEXT选择擣ull Scale Installation”-NEXT选择 揚CMX-32 Base Components”, 揚CMX-32 TCP/IP(RFC1006)”, 揚CMX32Programming Environment”, 揚CMX-32 ETP”

5、-NEXT有几屏选择安装路径,按NEXT继续.询问是否建Program group,选擸ES”-NEXT输入Group名字-NEXT显示擱eady to install”-NEXT显示擨nstallation Completed!”-FINISH找到硬盘上Program FilesCommon Files System CONV32.exe,鼠标右键弹出 菜单,选Properties-Security-Permissions,按Remove去掉Everyone组,按Add. 出现一屏擜dd users and groups”,在上部窗口选中攁dministrator斪,按ADD键, 组名添加在

6、下部窗口,在擳ype of access 摯翱谥醒Full Control”,按OK结束 此屏.按OK结束.同目录下Tnsui32.exe也需如此作.Start-Shutdown-攔estart the computer” File transfer software openFT (OPENFT CD-ROM)OpenFT Master Setup 菜单,选择openFT图标 语言 US english-OK显示README.TXT文件-OK选择 User-defined installation-OK选择 Full installation-OK选择 Multi User Mode-OK选

7、择 Performant encryption-OK有几屏选择安装路径,按OK继续.询问是否建Program group,选擸ES”输入Group名字-OK询问是否Restart Computer,选择CANCEL. 等BCT安装后再REBOOT.Start-Settings-Control Panel-Services双击OpenFT Server, Start up 由Automatic 改为Manual , OK双击OpenFT FTAM Server, Start up 由Automatic 改为Disable, OKCreat TNS database entries/set up

8、the CP connectionsStart-Programs-PCMX-32 4.0-TNS user interfaceEdit-Setup local address Transport System :ETP/X.25 , Local Address Type :APPL, Application Type :DIALG , 按 揂ddress” T-selector : Empty format ,X.25 DTE address :10,(根据X25ROUTE) NSAP AFI=48 ,DSP=交换机内的REMOTE ADDRESS(APPLID=DIALG). (如交换机内O

9、SIADR=48-0-10,则DSP=10) 按Facilities. Packet Size incoming=128,outgoing=128, Windows Size incoming=2 ,outgoing=2, 按OK.Edit-Setup Local Address Transport System : ETP/X.25, Local Address Type :PCMX, Application Type: NEABD ,按 揂ddress” T-selector : Empty format ,X.25 DTE address :10, NSAP AFI=48 ,DSP=交换

10、机内的REMOTE ADDRESS(APPLID=NEABD). 按Facilities. Packet Size incoming=128,outgoing=128, Windows Size incoming=2 , outgoing=2, 按OK.Edit -Setup Remote Application Name Part5=为交换机起的名字,Name Part4=DIALG, Transport System :ETP/X.25 ,Application Type :DIALG, 按 揂drress” T-selector:Empty format ,X25 DTE Address

11、:20,(根据X25ROUTE) NSAP AFI=48, DSP=交换机内的LOCAL ADDRESS(APPLID=DIALG) User Data : MMA Database 的名字.(待MMA database装后加入) 按 Facilities. 检查参数值如上,按OKEdit -Setup Remote Application Name Part5=为交换机起的名字,Name Part4=FT, Transport System : ETP/X.25 , Application Type: OPENFT , 按 揂drress” T-selector:Empty format ,

12、X25 DTE Address:20 NSAP AFI=48, DSP=交换机内的LOCAL ADDRESS(APPLID=NEABD) 按 Facilities. 检查参数值如上, 按OK这两个Remote Application 对应同一交换机,两个Local Address是对应BCT的.FILEEXIT.BCT VC2 software (BCT CD-ROM)执行光盘上文件 bct disk1setup.exeWELCOME屏幕-NEXTSoftware License Agreement-YESBCT VC2 Installation-Options-Workstation ,NE

13、XTSelect Connection-X.25,NEXTChoose BCT base Path-按缺省路径,NEXTBCT VC2 Installation-Options-Install with default settings,NEXT检查BCT Settings-NEXTSetup complete-攜es,I want to restart my computer now.”,FINISHMMA database(s) for appropriate EWSD version(s)Start-Programs-Basic Craft Terminal VC 2.2-MMA DB

14、SetupChoose Setup Option-Install, OKChoose Setup Path-Browse-A:插入软盘-OK-NEXTName of MMA Database-NEXTMMA DB Name Confirmation-YES数据拷在硬盘Program FilesSiemensBCTBCTDatabasesMMA*.*Updation of TNS Database : 在交换机节点的DIALG中的User Data中写全MMA Database的名字Acrobat Reader for on-line documentation (OPENFT CD-ROM)

15、OpenFT Master Setup 菜单,选择ACROBAT READER图标 . 语言选择-English,按OK.阅读安装协议,按Accept.选安装目录-C:ACROREAD,按OK.提示用户注册,按OK.出现用户表,填用户名及组织,按OK.出现组及图标,有信息擨nstallation is Complete”.按OK.ALT+TAB 换到OpenFT SETUP 屏幕,回车,选EXIT退出.安装完成.Set up users under Windows NTStart-Programs-Administrative tools-User Manager-New user输入User

16、name,Password,Confirm password,在四行选项中可选擯assword never expired” (若此 用户使用BCT,根据TRANSFILE命令的要求,用户名应小于8个字符)新用户属于USERS组,如需改变,按GROUP键,点中USERS组两下可以REMOVE,再点 击所需组两下即ADD,按OK结束按OK结束擭ew User” .Configure Windows NT users as BCT users,assign BCT applications or prepared templates via the Task Wizard.Task Tree-BC

17、T application-BCT administration-user-new输入用户名(与NT的用户名相同),点击提示框内Task Tree图标,出现 Templates , Refernce 及用户初始的Task Tree.将两个Task Tree都打开,其中有所装MMA DB 的目录和BCT Application不一样不一样的子目录用Reference的相应子目录代替.用鼠标点击 Refernce 中的Task Tree的子目录,将其拖至用户的Task Tree的相应子目 录, 放开左键, 有对话框问是否Replace,点YES,从菜单中选择退出.点击另两个图标,一个为ALARM

18、CONSOLE,一个为LOG SETTINGS,ALARM CONSOLE 可以修改启动条件,在LOG SETTINGS选择哪些程序记MLOG,至少 应选中CA,BMML,CFE,(点击程序名前的方框,画上勾,表示选中),最后按 OK退出BCT administration 中 选EXIT退出.退出 Task Tree重进,发现Task Tree 的子目录里已丰富很多 ,BCT Applications中 BMML , Command Assistant用于操作维护,Command File Executer 用于执行文件. 表 1 : WAN Service Configuration Program 的参数Menuparameters for X.25 DCN and X.25 direct connectionEicon C