1其他模块中兴zm at co product v

1、AT Command Set for ZTE ZM8300 ProductAT Command Set for ZTE ZM8300 Product型号：ZM8300 IoT 模块文档版本：1.1发布日期：2017 年04 月13 日AT Command Set for ZTE ZM8300 Product法律若接收中兴通讯（以下称为“中兴通讯”）的此份文档，即表示您已同意以下条款。若不同意以下条款，请停止使用本文档。本文档所有中兴通讯。保留任何未在本文档中明示授予的权利。文档中涉及中兴通讯的专有信息。中兴通讯事先，任何和个人不得、传递、分发、使用和泄漏该文档以及该文档包含的任何图片、表格、数

2、据及其他信息。和是中兴通讯的商标。中兴通讯的名称和标志是中兴通讯的商标或商标。在商标。在本文档中提及的其他或公司名称可能是其各自所有者的商标或中兴通讯或第权利人事先同意的情况下，阅读本文档并不表示以默示、不可反言或其他方式授予阅读者任何使用本文档中出现的任何标记的权利。本符合有关环境保护和人身安全方面的设计要求，的存放、使用和弃置应遵照产品手册、相关合同或相关国的要求进行。本文档按“现状”和“仅此状态”提供。本文档中的信息随着中兴通讯将不断更新，中兴通讯不再通知此类信息的更新。和技术的进步中兴通讯地址:中国518057市科技南路 55 号:1AT Command Set for ZTE ZM8

3、300 ProductAT Command Set for ZTE ZM8300 ProductAT Command Set for ZTE ZM8300 Product0Version History91 Introduction91.1 Purpose91.2 Abbreviations92 General Commands92.1 command echo E92.1.1 Syntax92.1.2 Description102.1.3 Defined values102.1.4 e.g.102.2 Request revision identification +CGMR102.2.1

4、Syntax102.2.2 Description102.2.3 Defined values102.2.4 e.g.102.3 Request midentification +CGMM112.3.1 Syntax112.3.2 Description112.3.3 Defined values112.3.4 e.g.112.4 Request international mobile subscriber identity +CIMI112.4.1 Syntax112.4.2 Description112.4.3 Defined values122.4.4 e.g.122.5 Reques

5、t product serial number identification +CGSN122.5.1 Syntax122.5.2 Description122.5.3 Defined values122.5.4 e.g.122.6 Request manufacturer identification +CGMI122.6.1 Syntax122.6.2 Description132.6.3 Defined values132.6.4 e.g.132.7 Request request TA revision identification +GMR132.7.1 Syntax132.7.2

6、Description132.7.3 Defined values142.7.4 e.g.142AT Command Set for ZTE ZM8300 Product3 SMS Commands143.1 Message Format +CMGF143.1.1 Syntax143.1.2 Description143.1.3 Defined values143.1.4 e.g.143.2 Send Message +CMGS153.2.1 Syntax153.2.2 Description153.2.3 Defined values153.2.4 e.g.153.3 New Message

7、 Indications to TE +CNMI153.3.1 Syntax153.3.2 Description163.3.3 Defined Values163.3.4 eg.204 Commands for Safety Configuration204.1 Change password +CPWD204.1.1 Syntax204.1.2 Description214.1.3 Defined values214.1.4 e.g.224.2 Enter PIN +CPIN224.2.1 Syntax224.2.2 Description234.2.3 Defined values234

8、.2.4 e.g.234.3 Facility lock +CLCK234.3.1 Syntax234.3.2 Description244.3.3 Defined values244.3.4 e.g.254.4 Restricted SIM access +CRSM254.4.1 Syntax254.4.2 Description264.4.3 Defined values264.4.4 e.g.275 Commands for Packet Domain275.1 Define PDP Context +CGDCONT275.1.1 Syntax275.1.2 Description285

9、.1.3 Defined values285.1.4 e.g.293AT Command Set for ZTE ZM8300 Product5.2 PS attach or detach +CGATT295.2.1 Syntax295.2.2 Description295.2.3 Defined values295.2.4 e.g.305.3 PDP context activate or deactivate +CGACT305.3.1 Syntax305.3.2 Description305.3.3 Defined values305.3.4 e.g.315.4 Set a PDP Co

10、ntext +ZIPCFG315.4.1 Syntax315.4.2 Description315.4.3 Defined values315.4.4 e.g.315.5 Activate or deactivate a connection +ZIPCALL325.5.1 Syntax325.5.2 Description325.5.3 Defined values325.5.4 e.g.326 Commands for System Configuration326.1 Operator selection +COPS336.1.1 Syntax336.1.2 Description336

11、.1.3 Defined values336.1.4 e.g.346.2 Set phone functionality +CFUN346.2.1 Syntax346.2.2 Description346.2.3 Defined values356.2.4 e.g.357 ZTE defined AT commands for enhanced functions357.1 Check PCB No. +ZPCB357.1.1 Syntax357.1.2 Description357.1.3 Defined values357.1.4 e.g.357.2 System reboot. +ZRS

12、T367. 2.1 Syntax367.2.2 Description367.2.3 e.g.367.3 Log Level +ZLOGLEVEL367.3.1 Syntax364AT Command Set for ZTE ZM8300 Product7.3.2 Description367.3.3 Defined values367.3.4 e.g.367.4 Restore +ZRESTORE377.4.1 Syntax377.4.2 Description377.4.3 e.g.378 Commands for GPS378.1 Initialization location comm

13、and +ZGINIT378.1.1 Syntax378.1.2 Description378.1.3 e.g.378.2 Set location mode +ZGMODE378.2.1 Syntax378.2.2 Description388.2.3 Defined values388.2.4 e.g.388.3 Set fix rate for tracking sessions +ZGFIXRATE388.3.1 Syntax388.3.2 Description398.3.3 Defined values398.3.4 e.g.398.4 Set QOS for location +

14、ZGQOS398.4.1 Syntax398.4.2 Description398.4.3 Defined values398.4.4 e.g.398.5 Location mode choice +ZGRUN408.5.1 Syntax408.5.2 Description408.5.3 Defined values408.5.4 e.g.408.6 Report error code +ZGPSERROR408.6.1 Syntax408.6.2 Description408.6.3 Defined values408.6.4 e.g.418.7 Enable/Disable +ZGPSE

15、RROR report418.7.1 Syntax418.7.2 Description418.7.3 Defined values418.7.4 e.g.418.8 Report satellites measurements +ZGMEASURE418.8.1 Syntax415AT Command Set for ZTE ZM8300 Product8.8.2 Description418.8.3 Defined values418.8.4 e.g.418.9 Enable/Disable +ZGMEASURE report428.9.1 Syntax428.9.2 Descriptio

16、n428.9.3 Defined values428.9.4 e.g.428.10 Report location status event +ZGPSEVENT428.10.1 Syntax428.10.2 Description428.10.3 Defined values428.10.4 e.g.428.11 Enable/Disable +ZGPSEVENT report428.11.1 Syntax428.11.2 Description438.11.3 Defined values438.11.4 e.g.438.12 Report location data +ZGPSR438.

17、12.1 Syntax438.12.2 Description438.12.3 Defined values438.12.4 e.g.438.13 Enable/Disable +ZGPSR report438.13.1 Syntax438.13.2 Description448.13.3 Defined values448.13.4 e.g.448.14 Get location data +ZGPSRG448.14.1 Syntax448.14.2 Description448.14.3 Defined values448.14.4 e.g.449 Commands for IOT459.

18、1 Power saving mode setting +CPSMS459.1.1 Syntax459.1.2 Description459.1.3 Defined values459.1.4 e.g.469.2 IOT mode pref setting +ZIOTMODE469.2.1 Syntax469.2.2 Description469.2.3 Defined values479.2.4 e.g.476AT Command Set for ZTE ZM8300 Product9.3 Report Serving Cell Information +ZCELLINFO489.3.1 S

19、yntax489.3.2 Description489.3.3 Defined values489.3.4 e.g.499.4 EPS network registration status +CEREG499.4.1 Syntax499.4.2 Description509.4.3 Defined values509.3.4 e.g.529.5 Establish TCP/UDP Connection +ZIPOPEN529.5.1 Syntax529.5.2 Description529.5.3 Defined values539.5.4 e.g.539.6 Close TCP/UDP C

20、onnection +ZIPCLOSE549.6.1 Syntax549.6.2 Description549.6.3 Defined values549.6.4 e.g.559.7 TCP/UDP Data Send +ZIPSEND559.7.1 Syntax559.7.2 Description559.7.3 Defined values569.7.4 e.g.569.8 TCP/UDP Data Receive +ZIPRECV569.8.1 Syntax569.8.2 Description569.8.3 Defined values579.8.4 e.g.579.9 Query S

21、ocket State + ZIPSTAT579.9.1 Syntax579.9.2 Description579.9.3 Defined values579.9.4 e.g.589.10 Ping to query network State +ZPING589.10.1 Syntax589.10.2 Description589.10.3 Defined values589.10.4 e.g.589.11 Setup Socket Data mode + ZDTMODE599.11.1 Syntax599.11.2 Description599.11.3 Defined values597

22、AT Command Set for ZTE ZM8300 Product9.11.4 e.g.5910 Commands for Cloud Service6110.1 Set regcode +ZCREGCODE6110.1.1 Syntax6110.1.2 Description6110.1.3 Defined values6110.1.4 e.g.6110.2 Config Cloud Server Information +ZCCFG6110.2.1 Syntax6110.2.2 Description6210.2.3 Defined values6210.2.4 e.g.6210.

23、3 Post Data to Remote Server +ZCPOST6210.3.1 Syntax6210.3.2 Description6210.3.3 Defined values6210.3.4 e.g.6310.4 Query Command from Remote server +ZCQUERY6310.4.1 Syntax6310.4.2 Description6310.4.3 Defined values6310.4.4 e.g.638AT Command Set for ZTE ZM8300 ProductVersion HistoryThis chapter report

24、s modifications and improvements over previous versions of the document.1 Introduction1.1 PurposeThis document discusses, in detail, the AT commands that are implemented in ZTE wireless data product. All the AT commands follow 3GPP (R99) TS27.005 and TS27.007.1.2 AbbreviationsFor the purposes of the

25、 present document, the following abbreviations apply:ATAttention; this two-character abbreviation is always used to start a command line to be sent from TE to TAEuropean Telecommunications Standards Institute International Telecommunication Union - Telecommunications Standardization SectorMobile Equ

26、ipment Mobile TerminationSubscriber Identity ModuleETSIITU-TME MT SIMTATerminal Adaptor, e.g. aterminating Equipment)data card (equal to DCE; Data CircuitTETerminal Equipment, e.g. a computer (equal to DTE; Data Terminal Equipment)Universal Integrated Circuit CardUniversal Subscriber Identity Module

27、UICCUSIM2 General Commands2.1 command echo E2.1.1 SyntaxTable2-1: ATE basic command syntax9VersionDateDescription1.0Feb 08 2017First release1.1April 13 2017Support more AT commandsAT Command Set for ZTE ZM8300 Product2.1.2 DescriptionThis command is used to set TA echoes commands back or not.2.1.3 D

28、efined values< value >:0: TA doesnt echo commands back1: TA echoes commands backdefault 1 i.e. TA echoes commands back2.1.4 e.g.Command: ATE1 Response:OK2.2 Request revision identification +CGMR2.2.1 SyntaxTable2-3: +CGMR action command syntax2.2.2 DescriptionExecution command causes the TA to

29、 return one or more lines of information text<revision>, determined by the MT manufacturer, which is intended to permit the user of the TA to identify the version, revision level or date, or other pertinent information of the MT to which it is connected to. Typically, the text will consist of

30、a single line containing the version of the product, but manufacturers may choose to provide more information if desired.2.2.3 Defined values<revision>: the total number of characters, including line terminators, in the information text shallnot exceed 31 characters.2.2.4 e.g.Command: AT+CGMRR

31、esponse: P663M1V1.0.2B03 P663M1V1.0.2B03 1June 10 2006 10:00:00 OK10CommandPossible response(s)+CGMR<CR><LF><revision><CR><LF><CR><LF>OK<CR><LF><CR><LF>+CME ERROR: <err><CR><LF>+CGMR=?<CR><LF>OK<CR>

32、<LF>CommandPossible response(s)E<value><CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product2.3 Request m2.3.1 Syntaxidentification +CGMMTable2-3: +CGMM action command syntax2.3.2 DescriptionExecution command causes the TA to return one or more lines of informat

33、ion text <m>,determined by the MT manufacturer, which is intended to permit the user of the TA to identify thespecific mof the MT to which it is connected to. Typically, the text will consist of a single linecontaining the name of the product, but manufacturers may choose to provide more infor

34、mation if desired.2.3.3 Defined values<m>: the total number of characters, including line terminators, in the information text shallnot exceed 2048 characters.2.3.4 e.g.Command: AT+CGMM Response: ZM8300OK2.4 Request international mobile subscriber identity +CIMI2.4.1 SyntaxTable2-4: +CIMI acti

35、on command syntax2.4.2 DescriptionExecution command causes the TA to return <IMSI>, which is intended to permit the TE toidentify the individual active application in the UICC (attached to MT.or USIM) or SIM card which is11CommandPossible response(s)+CIMI<CR><LF><IMSI><CR&

36、gt;<LF><CR><LF>OK<CR><LF><CR><LF>+CME ERROR: <err><CR><LF>+CIMI=?<CR><LF>OK<CR><LF>CommandPossible response(s)+CGMM<CR><LF><m><CR><LF><CR><LF>OK<CR><LF><CR>

37、<LF>+CME ERROR: <err><CR><LF>+CGMM=?<CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product2.4.3 Defined values<IMSI>: International Mobile Subscriber Identity (string without double quotes).2.4.4 e.g.Command: AT+CIMI Response: 460001194914416OK2

38、.5 Request product serial number identification +CGSN2.5.1 SyntaxTable2-5: +CGSN action command syntax2.5.2 DescriptionExecution command causes the TA to return one or more lines of information text <sn>, determined by the MT manufacturer, which is intended to permit the user of the TA to iden

39、tify the individual MT to which it is connected to. Typically, the text will consist of a single line containing the IMEI (International Mobile station Equipment Identity) number of the MT, but manufacturers may choose to provide more information if desired.Now this command can only return the IMEI

40、number.2.5.3 Defined values<sn>: the total number of characters, including line terminators, in the information text shall not exceed 2048 characters.<IMEI>: the IMEI value in NV.2.5.4 e.g.Command: AT+CGSN Response: 356722000068154OK2.6 Request manufacturer identification +CGMI2.6.1 Synt

41、axTable 2-6: + CGMI parameter command syntax12CommandPossible response(s)+CGMI<CR><LF><manufacturer><CR><LF><CR><LF>OK<CR><LF>CommandPossible response(s)+CGSN<CR><LF><IMEI><CR><LF><CR><LF>OK<CR><

42、LF><CR><LF>+CME ERROR: <err><CR><LF>+CGSN=?<CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product2.6.2 DescriptionExecution command causes the TA to return one or more lines of information text<manufacturer>, determined by the MT manufa

43、cturer, which is intended to permit the user ofthe TA to identify the manufacturer of the MT to which it is connected to. The text will consist of a single line containing the name of the manufacturer.2.6.3 Defined values<manufacturer>: the total number of characters, including line terminator

44、s, in the information text shall not exceed 2048 characters.Text shall not contain the sequence 0<CR> or OK<CR>2.6.4 e.g.Command: AT+CGMIResponse: ZTE INCORPORATEDOK2.7 Request request TA revision identification +GMR2.7.1 SyntaxTable 2-7: + GMR parameter command syntax2.7.2 DescriptionEx

45、ecution command causes the TA to return one or more lines of information text < TA revision>, determined by the MT manufacturer, which is intended to permit the user of the TA to identify the version, revision level or date, or other pertinent information of the MT to which it is connected to.

46、 The text will consist of a single line containing the version of the product.13CommandPossible response(s)+GMR<CR><LF>< TA revision ><CR><LF><CR><LF>OK<CR><LF><CR><LF>+CME ERROR: <err><CR><LF>+GMR=?<CR><LF&

47、gt;OK<CR><LF><CR><LF>+CME ERROR: <err><CR><LF>+CGMI=?<CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product2.7.3 Defined values< TA revision >: the total number of characters, including line terminators, in the information text

48、 shall not exceed 31 characters.2.7.4 e.g.Command: AT+GMRRespond: +GMR: BD_P673M3V1.0.1B02 OK3 SMS Commands3.1 Message Format +CMGF3.1.1 SyntaxTable3-1: +CMGF parameter command syntax3.1.2 DescriptionSet command tells the TA, which input and output format of messages to use. <mode> indicates t

49、he format of messages used with send, list, read and write commands and unsolicited result codes resulting from received messages. Mode can be either PDU mode (entire TP data units used) or text mode (headers and body of the messages given as separate parameters).Test command returns supported modes

50、 as a compound value.3.1.3 Defined values<mode>:0PDU mode (default when implemented)1text mode (not supported now)3.1.4 e.g.Command: AT+CMGF=0 Response: OK14CommandPossible response(s)+CMGF=<mode><CR><LF>OK<CR><LF>+CMGF?<CR><LF>+CMGF:<mode><CR

51、><LF><CR><LF>OK<CR><LF>+CMGF=?<CR><LF>+CMGF: (list of supported<mode>s)<CR><LF><CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product3.2 Send Message +CMGS3.2.1 SyntaxTable3-2: +CMGS action command syntax3.2.2 De

52、scriptionExecution command sends message from a TE to the network (SMS-SUBMIT). Message reference value <mr> is returned to the TE on successful message delivery. Optionally (when+CSMS <service> value is 1 and network supports) <scts> is returned. Values can be used to identify mes

53、sage upon unsolicited delivery status report result code. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command should be abortable.3.2.3 Defined values<length>:integer type value indicating the length of the actual TP data unit in oc

54、tets<mr>:TP-Message-Reference in integer format<ackpdu>:RP-User-Data element of RP-ACK PDU<ctrl-Z>:must be used to indicate the ending of PDU3.2.4 e.g.Command: AT+CMGS=24>0891683108200905F0040D91683151120800FE01< ctrl-Z >Response: OK=00462C943.3 New Message Indications to

55、TE +CNMI3.3.1 SyntaxTable3-3 + CNMI action command syntax15CommandPossible response(s)+CMGS=<length><CR>PDU is given<ctrl-Z/ESC>if PDU mode(+CMGF=0) and sending successful:<CR><LF>+CMGS:<mr>,<ackpdu><CR><LF><CR><LF>OK<CR><LF&

56、gt;if sending fails:<CR><LF>+CMS ERROR: <err><CR><LF>+CMGS=?<CR><LF>OK<CR><LF>AT Command Set for ZTE ZM8300 Product3.3.2 DescriptionSet command selects the procedure, how receiving of new messages from the network is indicated to the TE when TE i

57、s active, e.g. DTR signal is ON. If TE is inactive (e.g. DTR signal is OFF), message receiving should be done as specified in 3G TS 23.038 2.NOTE: When DTR signal is not available or the state of the signal is ignored (V.25ter command &D0), reliable message transfer can be assured by using +CNMA

58、 acknowledgement procedure.<mode> controls the processing of unsolicited result codes specified within this command,<mt> sets the result code indication routing for SMS-DELIVERs, <bm> for CBMs and <ds> for SMS-STATUS-REPORTs. <bfr> defines the handling method for buffered result codes when<mode> 1, 2 is enabled. If ME does not support requested item (although TA does), final result code +CMS ERROR: <err> is returned. See chapter Mes