迈普iad配置参考模板

1、先找测试环境进行业务测试，需注意红色处ena admin conf thost 120.193.241.193host 120.193.241.193interface fastethernet 0 ip address 192.168.0.2 255.255.255.0 exit ip route 0.0.0.0 0.0.0.0 192.168.0.1callrouting-conf dial-peer 1 pots slot 1 channel 0 0 destination-pattern 04822840789 channel 0 0 username 864822840789 pas

2、sword dgkd8ncaqbxwrmfchannel 1 1 destination-pattern 04822840790 channel 1 1 username 864822840790 password dgkd8ncaqbxwrmf exit dial-peer 2 voip destination-pattern xx. session-target sip-server exitexit fxs-card 1 channel 0 7 codec g711a channel 0 7 enable channel 0 7 callid enable exitvoicesrv-co

3、nf black-white-list exit sip national-code +86 call-transfer disable call-transfer consultation user-config enable exitinterface fastethernet01 / 3 sip-gateway voip interface sip-gateway voip proxy domain-name sip-gateway voip registrar domain-name exitno sip-gatewayvoicesrv-confsip national-code +8

4、6exit sip-gatewayend show sip regNumber/ 查看是否注册成功write /测试环境注册正常后，保存现场操作确认用户的IP，然后对红色的ip更换enaadminconf tinterface fastethernet 0 ip address 192.168.1.2 255.255.255.0 exit ip route 0.0.0.0 0.0.0.0 interface 192.168.1.1部分语句注解callrouting-conf dial-peer 1 pots slot 1 channel 0 0 destination-pattern 04822840789 channel 0 0 username 864822840789 password dgkd8ncaqbxwrmf此处的 0 0 代表设备第一个电话口fxs-card 1 channel 0 7 codec g711a channel 0 7 enable cha