船舶防火控制图识别符号

1、.船舶防火控制图识别符号*结构防火识别符号 A 23/Res.952序号识别符号名称使用说明1.1A 级分隔A-class division1.2B 级分隔B-class division1.3主竖区Main vertical zone1.4A 级铰链防火门A-class hinged fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of t

2、he door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight door.*符号的图注和解释应是防火控制图的组成部分，包括在控制图中的一系列符号和适当的解释，还可包括附加信息，如在固定式灭火系统中使用的灭火剂。* A legend of symbols and explanations should be a constituent part of any

3、 fire control plan and contain a list of the graphical symbols used in the plan, together with the appropriate explanations, and may include additional special information such as the type of extinguishing media used in fixed fire-extinguishing systems.1.5B 级铰链防火门B-class hinged fire door符号应标在门的位置上，且

4、显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of the door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol inthe case of a semi-watertight door.1.6A 级自闭

5、式铰链防火门A-class hinged self-closing fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of the door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of t

6、he symbol in the case of a semi-watertight door.1.7B 级自闭式铰链防火门B-class hinged self-closing fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of the door.Add WT to the right side of the symbol in the

7、case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight door.1.8A 级滑动防火门A-class sliding fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of the door.Add W

8、T to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight door.1.9B 级滑动防火门B-class sliding fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should sh

9、ow the actual direction of the door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight door.1.10A 级自闭式滑动防火门A-class self-closing sliding fire door符号应标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT

10、字样。The symbol should be at the door position and should show the actual direction of the door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight door.1.11B 级自闭式滑动防火门B-class self-closing sliding fire door符号应

11、标在门的位置上，且显示防火门的实际方位。如是水密门，则在符号右侧加上WT字样。如是半水密门，则在符号右侧加上SWT 字样。The symbol should be at the door position and should show the actual direction of the door.Add WT to the right side of the symbol in the case of a watertight door.Add SWT to the right side of the symbol in the case of a semi-watertight doo

12、r.1.12遥控通风或关闭Ventilation remote control or shut-off圆圈和符号右侧字母的颜色表示：A = 起居处所和服务处所为蓝色；M = 机器处所为绿色；C = 装货处所为黄色。Colour of the circle and a letter at the right side of the symbol should indicate as follows:A = blue for accommodation and service spaces;M = green for machinery spaces;C = yellow for cargo sp

13、aces.1.13遥控天窗Remote control for skylight1.14遥控水密门或防火门Remote control for watertight doors or fire doors在符号右侧加上WT 字样表示遥控水密门，加上FD 字样表示遥控防火门。Add WT to the right side of the symbol to indicate remote control for watertight doors or FD to indicate remote control for fire doors.1.15挡火闸Fire damper圆圈和符号右侧字母的

14、颜色表示：A = 起居处所和服务处所为蓝色；M = 机器处所为绿色；C = 装货处所为黄色。挡火闸的识别号码可在符号底部标明。Colour of the circle and a letter at the right side of the symbol should indicate as follows:A = blue for accommodation and service spaces;M = green for machinery spaces;C = yellow for cargo spaces.Identification number of the damper may

15、 be shown at the bottom of the symbol.1.16通风进口或出口的关闭装置Closing device for ventilation inlet or outlet圆圈和符号右侧字母的颜色表示：A = 起居处所和服务处所为蓝色；M = 机器处所为绿色；C = 装货处所为黄色。关闭装置的识别号码可在符号底部标明。Colour of the circle and a letter at the right side of the symbol should indicate as follows:A = blue for accommodation and se

16、rvice spaces;M = green for machinery spaces;C = yellow for cargo spaces.Identification number of the closing device may be shown at the bottom of the symbol.1.17遥控挡火闸Remote control for fire damper(s)圆圈和符号右侧字母的颜色表示：A = 起居处所和服务处所为蓝色；M = 机器处所为绿色；C = 装货处所为黄色。挡火闸的识别号码可在符号底部标明。Colour of the circle and a l

17、etter at the right side of the symbol should indicate as follows:A = blue for accommodation and service spaces;M = green for machinery spaces;C = yellow for cargo spaces.Identification number of the damper may be shown.1.18通风进口或出口的遥控关闭装置Remote control for closing device(s) for ventilation inlet and

18、outlet圆圈和符号右侧字母的颜色表示：A = 起居处所和服务处所为蓝色；M = 机器处所为绿色；C = 装货处所为黄色。关闭装置的识别号码可在符号底部标明。Colour of the circle and a letter at the right side of the symbol should indicate as follows:A = blue for accommodation and service spaces;M = green for machinery spaces;C = yellow for cargo spaces.Identification number

19、of the closing device(s) may be shown.消防装置识别符号序号识别符号名称使用说明2.1防火控制图Fire protection appliances or structural fire protection plan2.2遥控消防泵Remote control for fire pump(s)2.3消防泵Fire pump(s)类型、每单位时间出水量和压力应在符号右侧或图中标明。The type, quantity of water delivered per time unit, and pressure head should be indicated

20、 either at the right side of the symbol or in the legend.2.4遥控应急消防泵或由应急电源供电的消防泵Remote control for emergency fire pump or fire pump supplied by the emergency source of power2.5应急消防泵Emergency fire pump类型、每单位时间出水量和压力应在符号右侧或图注中标明。The type, quantity of water delivered per time unit, and pressure head sho

21、uld be indicated either at the right side of the symbol or in the legend.2.6燃油泵遥控关闭Fuel pump(s) remote shut-off2.7滑油泵遥控关闭Lube oil pump(s) remote shut-off2.8遥控舱底泵Remote control for bilge pump(s)2.9遥控应急舱底泵Remote control for emergency bilge pump2.10遥控燃油阀Remote control for fuel oil valves1.11遥控滑油阀Remote

22、 control for lube oil valves2.12遥控消防泵阀Remote control for fire pump valve(s)2.13遥控施放站Remote release station在符号底部标明所保护的处所。灭火剂种类应在符号下端用颜色指示，并在符号右侧用一个字母标明：灰色 CO2 代表二氧化碳或N代表氮气，棕色 H 代表除CO2 或N 以外的气体（标明气体种类），白色 P 代表干粉，绿色 W 代表水。Indicate at the bottom of the symbol the protected space. Extinguishing media sho

23、uld be colour coded in the lower part of the symbol and be indicated by a letter at the right side of the symbol as follows: grey CO2 for carbon dioxide or N for nitrogen, brown H for gas other than CO2 or N (type of gas to be indicated), white P for powder, green W for water.2.14国际通岸接头International

24、 shore connection2.15消火栓Fire hydrant2.16消防总管隔离阀Fire main section valve在符号右侧标明阀的相关号码。Indicate the reference number of the valve at the right side of the symbol.2.17自动喷水器隔离阀Sprinkler section valve在符号右侧标明阀的相关号码。本符号还适用于等效的水基灭火系统。自动干管喷水器系统的阀应在图中标明。Indicate the reference number of the valve at the right s

25、ide of the symbol.This symbol may also be applied to equivalent water-extinguishing systems.Valves for automatic dry-pipe sprinkler systems should be indicated in the legend.2.18干粉隔离阀Powder section valve在符号右侧标明阀的相关号码。Indicate the reference number of the valve at the right side of the symbol.2.19泡沫隔离

26、阀Foam section valve在符号右侧标明阀的相关号码。Indicate the reference number of the valve at the right side of the symbol.2.20固定式灭火装置Fixed fire extinguishing installation灭火剂种类应在符号中部用颜色指示，并在符号上方用一个字母标明：灰色 CO2 代表二氧化碳或N代表氮气，黄色 F 代表泡沫，棕色 H代表除CO2 或N以外的气体（标明气体种类），白色 P 代表干粉，绿色 W 代表水。Extinguishing media should be colour

27、coded in the centre part of the symbol and indicated by a letter on top of the symbol as follows: grey CO2 for carbon dioxide or N for nitrogen, yellow F for foam, brown H for gas other than CO2 or N (type of gas to be indicated), white P for powder, green W for water.2.21固定式灭火钢瓶组Fixed fire extingui

28、shing battery灭火剂种类应在符号下端用颜色指示，并在符号上方用一个字母标明：灰色 CO2 代表二氧化碳或N代表氮气，黄色 F 代表泡沫，棕色 H代表除CO2 或N以外的气体（标明气体种类），白色 P 代表干粉，绿色 W 代表水。Extinguishing media should be colour-coded in the lower part of the symbol and indicated by a letter on top of the symbol as follows: Grey CO2 for carbon dioxide or N for nitrogen,

29、 yellow F for foam, brown H for gas other than CO2 or N (type of gas to be indicated), white P for powder, green W for water.2.22放置在所保护区域的固定式灭火容器Fixed fire extinguishing bottle, placed in protected area灭火剂种类应在符号下端用颜色指示，并在符号上方用一个字母标明：灰色 CO2 代表二氧化碳或N代表氮气，黄色 F 代表泡沫，棕色 H代表除CO2 或N以外的气体（标明气体种类），白色 P 代表干粉，

30、绿色 W 代表水。Extinguishing media should be colourcoded in the centre part of the symbol and indicated by a letter on top of the symbol as follows: grey CO2 for carbon dioxide or N for nitrogen, yellow F for foam, brown . H for gas other than CO2 or N (type of gas to be indicated), white P for powder, gr

31、een W for water. 2.23高倍泡沫供应导管（排出管）High expansion foam supply trunk (outlet)如有必要，在符号底部标明所保护的处所。Indicate at the bottom of the symbol the protected space, if necessary.2.24水雾系统阀Water spray system valves如有必要，在符号底部标明所保护的处所。Indicate at the bottom of the symbol the protected space, if necessary.2.25惰性气体装置I

32、nert gas installation2.26消防炮Monitor灭火剂种类应在符号中部用颜色指示，并在符号上方用一个字母标明：黄色 F 代表泡沫，白色 P代表干粉，绿色 W 代表水。Extinguishing media should be colour coded in the centre part of the symbol and indicated by a letter on the right side of the symbol as follows: yellow F for foam, white P for powder, green W for water.2.2

33、7消防水带和水枪Fire hose and nozzle在符号右侧标明水带的长度；如果只使用一个种类的水带，可在图注中标出。灭火剂种类应在符号下部用颜色指示，并在符号上方用一个字母标明：黄色 F 代表泡沫，白色 P 代表干粉，绿色 W代表水。Indicate the hose length at the right side of the symbol; where only one type of hose is used, the information can be shown in the legend. Extinguishing media should be colour-cod

34、ed in the lower part of the symbol and indicated by a letter on the right side of the symbol as follows: yellow F for foam, white P for powder, green W for water.2.28灭火器Fire extinguisher在符号右侧标明灭火剂（CO2 代表二氧化碳，F 代表泡沫，H 代表除CO2 以外的气体（标明气体种类），P 代表干粉，W 代表水）和容量（气体和干粉用KG 表示，水和泡沫用L 表示）。灭火剂种类应在符号下端用颜色指示：灰色代表二

35、氧化碳，黄色代表泡沫，棕色代表除CO2 以外的气体，白色代表干粉，绿色代表水。Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powder, W for water) and capacity (kg for gas and powder, litres for water and foam) at the right side of the symbol. Media s

36、hould be colour-coded in the lower part of the symbol as follows: grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water.2.29推车式灭火器Wheeled fire extinguisher在符号右侧标明灭火剂（CO2 代表二氧化碳，F 代表泡沫，H 代表除CO2 以外的气体（标明气体种类），P 代表干粉，W 代表水）和容量（气体和干粉用KG 表示，水和泡沫用L 表示）。灭

37、火剂种类应在符号下端用颜色指示：灰色代表二氧化碳，黄色代表泡沫，棕色代表除CO2 以外的气体，白色代表干粉，绿色代表水。Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powder, W for water) and capacity (kg for gas and powder, litres for water and foam) at the right side o

38、f the symbol. Media should be colour-coded in the centre part of the symbol as follows:grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water.2.30手提式泡沫枪装置或相关备用容器Portable foam applicator unit or relevant spare tank(s)2.31消防贮存箱Fire locker在符号右侧标明消防贮存箱号

39、。每个消防贮存箱里的主要贮存物应在图中标明。Indicate the number of the fire locker at the right side of the symbol. The principal contents of each fire locker should be indicated in the legend.2.32由灭火系统保护的处所或处所群Space or group of spaces protected by fire extinguishing system在符号上方标明灭火剂种类（CO2代表二氧化碳，F 代表泡沫，H 代表除CO2 以外的气体（标明气

40、体种类），P 代表干粉，W 代表水，S 代表喷淋器或高压水灭火系统）和容量（气体和干粉用KG 表示，水和泡沫用L 表示）。添加词尾L 表示固定式局部应用灭火系统。灭火剂种类应在符号下端用颜色指示：灰色代表二氧化碳，黄色代表泡沫，棕色代表除CO2 以外的气体，白色代表干粉，绿色代表水，桔黄色代表喷淋器或高压水灭火系统。Indicate type of extinguishing media (CO2 for carbon dioxide, F for foam, H for gas other than CO2 (type of gas to be indicated), P for powde

41、r, W for water, S for sprinkler or high pressure water extinguishing system) and capacity (kg for gas and powder, litres for water and foam) at the top of the symbol. Add suffix.L. for fixed local application fire fighting system. Media should be colour-coded in the symbol as follows: grey for carbon dioxide, yellow for foam, brown for gas other than CO2, white for powder, green for water, orange for sprinkler or high pressure water extinguishing system.2.33水雾枪Water fog app